Lindy Radio 42831 User Manual

INSTALLATION  
USB 2.0 Hard Drive Enclosure  
Installation Guide  
English  
Installationsanleitung  
Manuel Utilisateur  
Manuale d’uso  
Deutsch  
Français  
Italiano  
ENGLISH  
Remove the plastic end cover with a pen or appropriate tool as  
shown above. Press the metal latch slightly and push the plastic  
end cap out. Slide in the HDD so the connector properly fits into  
the backplane. Press it firmly and reinstall the end cap so both  
sides engage safely.  
Deutsch  
Entfernen Sie die Endkappe wie oben gezeigt durch Ein-  
drücken des Riegelmechanismus und Herausschieben der  
Endkappe mit einem Kugelschreiber oder geeignetem Werk-  
zeug. Schieben Sie die Festplatte so ein, dass sie sicher in  
die Anschlussleiste einrastet. Setzen Sie nun die Endkappe  
wieder so ein, dass beide Seiten sicher einrasten.  
LINDY No. 42831  
For Home and Office Use  
Tested to Comply with FCC Standards  
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH  
-
FIRST EDITION (AUG 2008)  
OPERATION  
(ENGLISH)  
Power Requirement  
Français  
Modern 2.5” drives with low power requirements can normally be  
powered by two of your computer’s root USB ports using the  
supplied Dual USB Power cable.  
Retirez la façade en plastique avec un stylo ou un outil  
approprié, comme illustré sur la photo. Exercer une légère  
pression sur la partie métallique et pousser vers l’extérieur.  
Glisser le disque, de sorte que le connecteur s’emboîte  
correctement avec la façade arrière. Exercer une forte  
pression sur le disque, puis replacer la façade avant jus-  
qu’à l’enclenchement des clips sur le côté.  
If you want to connect this enclosure to non-powered USB ports or  
a bus powered hub an optional regulated 5VDC power supply has  
to be connected to the DC input of the enclosure.  
Driver Installation  
Modern operating systems such as Windows Vista, XP, 2000 and  
ME already include the necessary drivers.  
LED Indicator  
The LED indicator illuminates solid blue when the hard drive is  
connected and powered up. The LED flashes during data transfer.  
Do not disconnect the enclosure whilst the LED is flashing!  
Italiano  
HDD Partitioning  
Rimuovere il frontalino in plastica con una penna o un attrez-  
zo appropriato come mostrato nella foto qui sopra. Esercitare  
una leggera pressione sulla parte metallica ed estrarre il  
frontalino in plastica. Inserire l’Hard Disk nella direzione  
esatta in modo da consentire il corretto collegamento del  
connettore nell’alloggiamento. Premere l’Hard Disk per per-  
mettere la connes-sione e quindi reinstallare il frontalino in  
plastica.  
If you use a brand new hard drive it may not be formatted or have  
a partition and so your operating system will not show a drive  
letter. Use the partitioning program from your operating system  
(FDISK or similar). In Windows, Right click on My Computer and  
select Manage. Then click Disk Management. On the bottom  
right side the new drive should now be shown without a drive  
letter. Right click on the grey field to the left of the drive and select  
Initialize Disk. Once completed you can right click on the new  
drive, choose to format it and change drive letters according to  
your requirements.  
Find more information on this topic from the HELP section of your  
operating system.  
 

La Crosse Technology Clock Radio WT 5720 User Manual
Learning Resources Pill Reminder Device LER 6955 User Manual
Liebherr Refrigerator 7081 457 00 User Manual
Lifebreath Ventilation Hood 2500EFD User Manual
Lifestyles Treadmill 83129742 User Manual
Lincoln Automobile 2009 MKZ User Manual
Lola Products Laser Pointer UR89A User Manual
Makita Sander GV7000C User Manual
Maxon Telecom Radio SP 300 Series Synthesized Scanning Radio User Manual
Melissa Vacuum Cleaner 640 113 User Manual