Manitowoc Ice Ice Maker K00047 User Manual

K00047 ADAPTER KIT  
Installation Instructions  
1. The K047 adapter kit is used for installing an E-0200, E-0400, or G-0600 ice machine on an SH-500 bin. The bin  
must be leveled before proceeding to step 2.  
2. INSTALLATION OF ASAPTER:  
A. Remove four screws from bin used to hold hinges.  
B. Locate right-hand and left-hand adapter panels.  
C. Remove foam tape, which is under the adapter panels.  
D. Using panels as template, drill four holes, 5/32” diameter, in back of bin.  
E. Secure panels in place.  
F. Apply foam tape, as shown in Illustration 1.  
3. INSTALLATION OF ICE MACHINE:  
A. Remove two screws from bottom of ice machine that are 16 1/2” from the back of the machine.  
B. Position ice machine on bin.  
C. From inside the bin, reinstall the two screws removed in Step 3A.  
D. Proceed to service manual for electrical and water hook-up and start-up procedures.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8002153  
Page 1 of 2  
Rev. 05/17/01  
 

Leica Microscope Magnifier Leica VT1200 User Manual
Life Fitness Home Gym 8245102 User Manual
Lindy Switch P16 IP User Manual
Linear Satellite Radio ET 2 User Manual
Linksys Network Card WRE54G User Manual
Majestic Appliances Electric Heater 3370 User Manual
Makita Saw DPC7331HD User Manual
M Audio Speaker SBX User Manual
Maytag Dishwasher W10199658A User Manual
McCulloch Lawn Mower 96141020600 User Manual