Manitowoc Ice Ice Maker SN12 User Manual

Manitowoc SN12/SN20 Model Nugget Ice Machines  
Cutter Head Replacement Instructions  
1. Disconnect water supply.  
2. Remove front panel.  
3. Move toggle switch to CLEAN position after the 5 minute delay expires. The evaporator and float  
chamber will drain.  
4. Disconnect power at electrical disconnect.  
WARNING  
Disconnect power to the ice machine at the electrical disconnect, moving  
the toggle switch to the off position will not disconnect line voltage.  
5. Remove top, left and right side panels.  
6. Remove ice chute assembly.  
NOTE; if the ice wiper can not be hand removed; place the handle end of a screwdriver against the ice  
wiper, then tap the screwdriver (counterclockwise) with a hammer to loosen the ice wiper from the  
auger.  
REMOVE COVER  
REMOVE ICE DAMPER  
REMOVE STRAINER  
REMOVE ICE WIPER  
REMOVE ICE CHUTE  
LOOSEN HOSE CLAMP AND  
DISCONNECT DRAIN LINE  
Manitowoc Foodservice  
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
000004021  
Sheet 1 of 2  
08/25/08  
 

LevelOne Switch FSW 0512 User Manual
Liebert Air Conditioner 272014 User Manual
LifeSource Blood Pressure Monitor UA 789 User Manual
Lindy Switch 102 User Manual
Linear Garage Door Opener LDC0800 User Manual
Lucent Technologies Switch CBX Multiservice Edge Switch User Manual
M Audio Computer Drive Transit USB User Manual
Maximatic Slow Cooker MST 800V User Manual
Mercedes Benz Automobile 2002 CL 500 User Manual
Midland Radio Two Way Radio P 20 User Manual