Marley Engineered Products Electric Heater WMGF240 User Manual

L Series  
Hand Carry Portable Radiant Heaters  
Installation & Maintenance Instructions  
Dear Owner,  
Congratulations! Thank you for purchasing this new heater by Marley Engineered Products. You have made a wise investment select-  
ing the highest quality product in the heating industry. Please carefully read the installation and maintenance instructions shown in  
this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products... the industry’s  
leader in design, manufacturing, quality and service.  
... The Employees of Marley Engineered Products  
!
WARNING  
6. Heater element operates at very hot temperatures. Do NOT  
place heater near combustibles and DONOT place  
combustibles in the radiation path in front of the heater.  
Keep all combustibles at least five (5) feet from front of  
heater.  
7. Heater is designed and intended for use as illustrated in this  
instruction sheet only. Do not position or use heater in any  
other manner.  
8. This heater is hot when in use. To avoid burns, do NOT let  
bare skin touch hot surfaces. Keep combustible materials,  
such as furniture and papers at least 5 feet from the front of  
the heater.  
Read Carefully - This Instruction Sheet Contains Vital  
Information For The Proper Assembly, Set-Up And  
Efficient Operation Of The Heater. Carefully Read The Manual  
Before Assembly, Operation, Or Cleaning Of The Heater. Failure  
To Adhere To The Instructions Could Result In Fire, Electrical  
Shock, Property Damage, Serious Personal Injury, Or Death.  
Save These Instructions And Review Frequently For Continuing  
Safe Operation And Instructing Future Users.  
1. To prevent a possible electrical shock, disconnect all power  
coming to heater at main service panel before wiring or  
servicing.  
2. All wiring must be in accordance with the National and Local  
Electrical Codes and the heater must be grounded as a  
precaution against possible electrical shock.  
3. Verify the power supply voltage coming to the heater  
matches the ratings printed on the heater nameplate before  
9. DO NOT LEAVE HEATER UNATTENDED WHILE IN  
OPERATION.  
10.Always disconnect heater when not in use.  
11. Do NOT use outdoors in areas subject to wind.  
12.Connect to properly grounded outlets or building ground.  
13.This heater has hot surfaces. Do NOT use it in areas where  
gasoline, paint or flammable liquids are used or stored.  
energizing.  
4. This heater is NOT suitable for use in hazardous locations as  
described by the National Fire Protection Association (NFPA).  
This heater has hot and arcing or sparking parts inside. Do  
NOT use in areas where gasoline, paint or other flammable  
liquids are used or stored.  
14.Use this heater only as described in this manual. Any other  
use not recommended by the manufacturer may cause fire,  
electric shock or injury to persons.  
5. This heater is intended to provide temporary, supplemental  
localized heat only in non-residential locations. The heater is  
intended for use on the floor only. Do NOT place heater on  
surface where is could fall or tip over.  
15.In order to prevent equipment damage, protect with a  
ground fault device such as Marley Engineered Products  
WMGF240 for 240V heaters and WMGF480 for 480V  
heaters.  
SAVE THESE INSTRUCTIONS  
 
4. Remove retainer screw located on the reflector at the terminal  
MAINTENANCE  
WARNING  
end.  
a
5. Loosen (2), 3/8" nuts from the terminal box bracket located on  
the back of the heater and slide the entire heating element  
assembly out of the reflector assembly.  
6. Remove wires and jumper straps as required to replace the  
failed heating element(s).  
!
ELECRIC SHOCK HAZARD. Disconnect all power before  
servicing or replacing heating elements.  
The heater requires no special maintenance other than  
occasional cleaning to prevent excess accumulation of dust and  
lint on surfaces. It is important for the reflectors to be kept clean  
to obtain the maximum radiant output. If used as a movable unit,  
the cart and cord should be checked periodically to make sure the  
hardware remains tight and cart and cord are not damaged. Do  
not continue to use the heater if damaged.  
7. Remove bulkhead fitting nuts and washers.  
8. Remove failed element and replace with a new element.  
Replace only with Marley Engineered Products elements.  
Use of other elements will cause excess temperatures  
inside terminal box.  
9. Place gasket on the bulkhead fitting and insert terminals and  
fittings into the element holes in the terminal box.  
Element Replacement (Contact Factory for Part Number.)  
1. Remove Terminal Box Cover.  
2. Disconnect lead wires from heater terminals.  
3. Remove safety grilles.  
10.Place washers and nuts on bulkhead fittings and tighten.  
11. Replace wiring and jumper straps.  
12.Reassemble by following the reverse procedures  
(steps 5 through 1)  
DIMENSIONS  
11-3/4"  
(298.45mm)  
11-3/8"  
(288.925mm)  
11-3/4"  
(298.45mm)  
11-3/8"  
(288.925mm)  
28-1/2"  
(723.9mm)  
49"  
(1244.6mm)  
1.5 & 2.0 KW  
4.5 KW  
3
 
LIMITED WARRANTY  
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials  
for one year from date of installation, except heating elements which are warranted against defects in workmanship and  
materials for five years from date of installation. This warranty does not apply to damage from accident, misuse, or  
alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly  
installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be  
accompanied by proof of the date of installation.  
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs,  
and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of  
this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley  
Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight  
paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered  
Products.  
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED  
THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS  
AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES  
ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY,  
OR CONTRACT.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or  
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which  
vary from state to state.  
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at  
1-800-642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service  
identification tag, both available from Marley Engineered Products. When requesting return authorization, include all  
catalog numbers shown on the products.  
HOW TO OBTAIN WARRANTY SERVICE AND  
WARRANTY PARTS PLUS GENERAL INFORMATION  
1. Warranty Service or Parts  
2. Purchase Replacement Parts  
3. General Product Information  
1-800-642-4328  
1-800-654-3545  
Note: When obtaining service always have the following:  
1. Model number of the product  
2. Date of manufacture  
470 Beauty Spot Rd. East  
Bennettsville, SC 29512 USA  
3. Part number or description  
PPD 057A  
12-03  
4
Part No. 5200-2651-000  
 

LG Electronics Cell Phone AN510 User Manual
LG Electronics Telephone LDP7008D User Manual
Liebert Power Supply 1000 3000VA 60 Hz 120V User Manual
Life Fitness Elliptical Trainer 95XE 0XXX 01 User Manual
Lincoln Electric Welding Consumables CAN F15 User Manual
LOREX Technology Digital Camera SG7555RB Series User Manual
Magic Chef Freezer MCCF5WBX User Manual
Melissa Fan 671 107 User Manual
Melissa Styling Iron 635 071 User Manual
Memorex DVD Player MVD2047 User Manual