Memorex Portable DVD Player iFlipTM User Manual

user guide  
manual del  
usuario  
iFlip 8.4”portable video player for iPod®  
Reproductor de video portátil iFlip para iPod con pantalla de 8.4”  
*Compatible with iPod devices with docking capability (iPod unit sold separately)  
*Compatible con iPod con conector dock (la unidad de iPod se vende por separado)  
Mi8000-BLK  
Please read these instructions  
completely, before operating  
this product.  
Por favor lear instruciones  
completamente, antes de  
usar este producto.  
 
SAFETY PRECAUTIONS  
INFORMATION:  
This equipment complies with Class B digital device regulations.  
This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
WARNING: TO PREVENT FIRE OR SHOCK  
HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN  
OR MOISTURE.  
SURGE PROTECTORS:  
It is recommended to use a surge protector for AC connection.  
Lightning and power surges ARE NOT covered under warranty  
for this product.  
This Class B digital apparatus complies with Canadian  
ICES-003.  
Cet appareil numérique de la classe B est conforme à la  
norme NMB-003 du Canada.  
 
2
Dear Customer:  
Selecting fine audio and video equipment such as the unit you’ve just purchased  
is only the start of your musical enjoyment. Now it’s time to consider how you  
can maximize the fun and excitement your equipment offers. This manufacturer  
and the Electronic Industries Association’s Consumer Electronics Group want  
you to get the most out of your equipment by playing it at a safe level. One that  
lets the sound come through loud and clear without annoying blaring or  
distortion-and, most importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher  
volumes of sound. So what sounds “normal” can actually be loud and harmful to  
your hearing. Guard against this by setting your equipment at a safe level  
BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and  
without distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the  
future. After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and  
enjoyment. Since hearing damage from loud noise is often undetectable until it is  
too late, this manufacturer and the Electronic Industries Association’s Consumer  
Electronics Group recommend you avoid prolonged exposure to excessive noise.  
This list of sound levels is included for your protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at  
two feet  
50  
60  
70  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER  
CONSTANT EXPOSURE:  
EIA  
EST. 1924  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
Rocket launching pad  
We  
WantYou  
LISTENING  
Information courtesy of the Deafness Research Foundation.  
ForALifetime  
 
3
LOCATION OF CONTROLS  
MAIN UNIT  
1. S-VIDEO Jack  
(Side of Unit)  
2. LINE OUT Jack  
(Side of Unit)  
3. Headphones 1 Jack  
(Side of Unit)  
4. Headphones 2 Jack  
(Side of Unit)  
9. MENU Button  
10.Battery (Charging)  
Indicator  
11.Power Button  
12.POWER IN Jack  
13.Fully Charged Indicator  
14.Power On Indicator  
15.- / + (Volume/Setting)  
Button  
5. Left Speaker  
6. Cradle Dock for use  
with iPod  
16.Right Speaker  
7. Dock Release Button  
8. Screen  
 
4
POWER SOURCE  
AC CONNECTION  
Insert the small end of the AC adapter into the POWER IN jack (located on the side of  
the unit). Connect the AC cord to the adapter and connect the other end to a wall outlet  
having 120V AC, 60 Hz. AC Adapter, DC 12V Z  
AC Outlet  
AC Plug  
NOTES:  
The AC adapter supplied with the unit is polarized to help minimize the possibility  
of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not  
file or cut the wide blade. It is the user’s responsibility to have an electrician replace  
the obsolete outlet.  
Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when  
not in use.  
Only use the supplied AC Adapter which has the following specs: DC 12V Z  
CHARGING THE INTERNAL BATTERY PACK  
When the Mi8000 is operating on AC power (as described above), it will also charge  
the internal battery pack. While the battery pack is charging, the Battery (Charging)  
indicator will light amber. When the battery pack is full, the Fully Charged indicator will  
light green.  
NOTES:  
When the battery is low, the Battery (Charging) indicator will flash amber.  
Fully charge the battery pack (6.5 hours) before using it for the first time.  
Make sure the battery packs is charged at least once a year.  
When fully charged, the unit can be used for up to 5 hours.  
For iPod charging, please refer to page 7 for details.  
 
5
OPTIONAL FEATURES  
S-VIDEO JACK (Side of Unit)  
If you are using an iPod with video (5th generation) or iPod photo, and your TV has  
an S-Video input, you can connect the Mi8000 to the external TV with an S-Video  
cable. You will then be able to view the photos/videos from the iPod on your external  
TV.  
NOTES:  
Set the TV’s TV/VIDEO button or switch to the VIDEO setting.  
When connecting the Mi8000, refer to the owner’s manual of the TV, as well as  
this manual.  
When connecting the Mi8000 to the TV, make sure the power is off and both  
units are unplugged before making any connections.  
Make sure to go into the Settings menu of your iPod and set the TV Out setting  
to ON; otherwise, you may not be able to view the videos/photos on your  
external TV.  
LINE OUT JACK (Side of Unit)  
By using a home audio connection cable, superb sound can be heard through your  
home audio system. Before making any connections, turn off the power to all  
equipment.  
Plug a connection cable between the LINE OUT jack on the side of the Mi8000 and  
the amplifier’s LINE or AUX IN jack. (Do not connect it to the amplifier’s  
Headphones jacks.)  
NOTE: If the Mi8000 interferes with TV or radio reception, move the Mi8000 away  
from the TV or radio or turn off the power to the Mi8000.  
 
6
INSERTING AN iPod  
1
2
Press the Dock Release button.  
Locate the correct holder to use as  
shown on page 10. Insert the  
holder onto the dock (as shown)  
and slip the side tabs into place.  
IMPORTANT NOTE:  
If you are using the holder marked  
A compatible with any iPod with  
dock connector”, please insert the  
iPod universal dock (not included)  
corresponding to your iPod model  
onto the dock. Then, insert the  
holder followed by the iPod.  
Insert the iPod onto the holder.  
Gently push down so the  
connector on the iPod slides onto  
the connector on the Mi8000.  
Press the edge area of the holder  
down gently (as shown) until it  
clicks into place.  
NOTES:  
To remove, press the Dock  
Release button again. Then,  
remove the iPod first, followed  
by the holder.  
Do not press the holder by  
pushing the iPod.  
3
Once you connect the iPod, it will  
start charging the battery until it is  
full. (The iPod can charge only  
when the Mi8000 is connected with  
the AC adapter.) When the iPod is  
connected to the Mi8000, it will be  
in Charging mode until the battery  
is full. Please see the next page for  
instructions on using an iPod with  
this unit.  
 
7
OPERATION  
USING AN iPod WITH THIS UNIT  
1
2
With an iPod connected (see  
previous page), turn the Mi8000 on  
by pressing and holding the Power  
button (if it is not on already); the  
Power On indicator will light green.  
Operate the iPod as per its  
owner’s manual.  
For music selections, the sound  
will be heard through the Mi8000’s  
speakers.  
For photo selections, the image  
will be seen on the Mi8000’s  
screen.  
For video selections, the sound  
will be heard through the Mi8000’s  
speakers and the image will be  
seen on the Mi8000’s screen.  
NOTES:  
Make sure to go into the Settings menu of your iPod and set the TV  
Out setting to ON and set the TV Signal to NTSC; otherwise, you may  
not be able to view the videos/ photos on your external TV.  
The photo and video selections are for iPod with video (5th  
generation). The photo selection is also suitable for iPod photo.  
3
4
Adjust the volume as desired by  
When done, press and hold the  
Power button (the Power On  
indicator will go out) and also turn  
off the iPod.  
pressing the - / + (Volume/Setting)  
button.  
For private listening, plug in  
headphones into the Headphones  
jack(s) on the side of the Mi8000.  
The speakers will be disconnected  
when headphones are plugged in.  
 
8
OPERATION (CONTINUED)  
SETTING THE MENUS  
1
2
1
1
2
2
With the Mi8000 on, press the  
MENU button 1; the menu will  
appear. To adjust the Brightness,  
Contrast, Sharpness, Color or Hue,  
select the desired option by  
repeatedly pressing the MENU  
button 1. Then adjust the option by  
pressing the - / + (Volume/Setting)  
button 2, followed by the MENU  
button 1 again.  
To adjust the Screen Mode, select  
Screen Mode by repeatedly  
pressing the MENU button 1. Then  
select between 16:9 (Wide Screen)  
and 4:3 (Pan Scan: video material  
formatted in this style is played back  
with the left and right edges cut off)  
by pressing the - / + (Volume/  
Setting) button 2, followed by the  
MENU button 1 again.  
3
4
1
1
2
2
To reset the unit back to its factory  
settings, select Default by  
repeatedly pressing the MENU  
button 1. Then press the - / +  
(Volume/Setting) button 2.  
To exit the menu, select Exit by  
repeatedly pressing the MENU  
button 1. Then press the - / +  
(Volume/Setting) button 2.  
 
9
OPERATION (CONTINUED)  
iPod HOLDERS  
Locate your iPod in the chart below and select the respective holder (the  
Holder No. is marked at the back of the holders as shown below) to match  
with your iPod. Insert the corresponding holder and your iPod into the unit as  
described on page 7.  
iPod  
Type  
Memory Holder No.  
Fifth  
30GB  
No. 9  
iPod with video  
30GB  
Generation  
iPod with  
video  
No. 10  
iPod with video  
60GB/80GB  
60GB/  
80GB  
NOTE:  
For all other iPod models, please use the holder marked “A compatible  
with any iPod with dock connector”.  
IMPORTANT!  
The Holder No. is marked at the  
back of the holders. Please refer  
to the illustration to the left for the  
location of the Holder No.  
 
10  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
SYMPTOM  
CAUSE  
SOLUTION  
No sound from iPod.  
Volume is  
Increase volume using  
- / + (Volume/Setting) button.  
Check the connection  
(see pages 7-8).  
set to minimum.  
Incorrectly connected.  
No image from iPod.  
iPod has incorrect  
settings selected.  
In the Settings menu of  
your iPod, set the TV  
Out setting to ON.  
Check the connection  
(see pages 7-8).  
Incorrectly connected.  
No video from iPod.  
iPod not charging.  
Incorrect iPod model  
connection.  
Only for iPod with video  
(5th generation) and iPod  
photo.  
Mi8000 not connected  
with the AC adapter.  
The iPod can charge only  
when the Mi8000 is  
connected with the AC  
adapter.  
 
11  
SPECIFICATIONS  
GENERAL:  
Power Source ................DC 12V Adapter (Center Positive)  
Battery Pack..................................................................7.2V  
Speaker...............................................................2 x 8 ohms  
Output Power .......................................................2 x 1.2 W  
Weight.......................................................................2.5 Lbs  
Dimensions............................1.7" (H) X 8.7" (W) X 6.7" (D)  
Weight and dimensions are approximate.  
Specifications are subject to change without notice.  
This product has been designed specifically to work with iPod  
and has been certified by the developer to meet Apple  
performance standards. Includes iPod Universal Dock.  
Compatible with any iPod with dock connector.  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,  
PLEASE VISIT OUR WEBSITE AT:  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90  
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR  
PLACE OF PURCHASE OR MEMOREX.  
FOR  
PARTS  
AND  
ACCESSORIES,  
CONTACT  
FOX  
INTERNATIONAL AT 1-800-321-6993.  
 
12  
Memcorp, Inc. Weston, FL Printed in Hong Kong  
Memcorp, Inc. Weston, FL Impreso en Hong Kong  
iPod is a trademark of Apple Computer, Inc., registered in the U.S.  
and other countries. This product has been designed speciꢀcally  
to work with iPod and has been certiꢀed by the developer to  
meet Apple performance standards. Includes iPod Universal  
Dock. Compatible with any iPod with dock connector.  
iPod es una marca registrada de Apple Computer, Inc. registrada  
en EE. UU. y otros países. Este producto ha sido diseñado  
especíꢀcamente para funcionar con los reproductores iPod. El  
fabricante certiꢀca que cumple con las normas decalidad de  
Apple. Incluye la base Dock universal compatible con cualquier  
 
modelo de iPod apto para la base Dock.  

Kyocera Copier C4008 User Manual
Land Pride Spreader OS1548 User Manual
Lenovo Tablet 10062 7727 User Manual
LG Electronics Network Card GH22LS30 User Manual
Lindy Switch 32586 User Manual
LST Smoke Alarm 45681 277 User Manual
Magnavox TV Antenna 24ME403V User Manual
Maytag Dishwasher DW 3 User Manual
McCulloch Lawn Mower 966485901 User Manual
Microsoft Photo Scanner 101 User Manual