INSTALLATION INSTRUCTIONS FOR PART 95-8903B
APPLICATIONS
SUBARU
LEGACY & OUTBACK
2010
(NON-NAVIGATION RADIOS ONLY)
95-8903B
KIT FEATURES
• DDIN radio provision
• Stacked ISO radio provision
• Painted scratch resistant matte black
KIT COMPONENTS
A) DDIN Trim plate B) DDIN Brackets
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-8901 Subaru Harness 1990-Up
• 70-7552 Nissan Harness 2007-Up
A
Antenna Adapter:
• 40-SB10 Subaru Antenna Adapter 2005-Up
TOOLS REQUIRED:
• Small Flat Blade Screwdriver • Phillips Screwdriver
• Panel Removal Tool • Socket Wrench
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
95-8903B DASH DISASSEMBLY
2010 SUBARU LEGACY / OUTBACK
A
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
2
3
Unclip and remove the radio trim
panel including the a/c vents.
(Figure A)
Remove (4) Phillips screws securing
the factory radio.
1
95-8903B KIT ASSEMBLY
2010 SUBARU LEGACY / OUTBACK
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
A
1
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2
3
Attach the Double DIN brackets to the
Double DIN trim plate. (Figure A)
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the assem-
bly using the screws supplied with
the radio. (Figure B)
B
4
Reassemble dash in reverse order of
disassembly.
2
95-8903B
NOTES
95-8903B
NOTES
95-8903B
NOTES
95-8903B INSTRUCTIONS
INSTRUCTIONS
306
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
REV. 12/18/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST95-8903B
|