Owner's Manual
! WARNING !
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
15-0100
STAMINA PRODUCTS
MADE IN TAIWAN
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2757 S. Austin, Springfield, MO 65807
Customer Service Number
1 (800) 375-7520
2002, 08
THANK YOU FOR PURCHASING THE hi-lo Cycle 100
To help you get started, we have pre-assembled most of your hi-lo Cycle
100 at the factory with the exception of those few parts left unassembled
for shipping purposes. Simply follow the few assembly instructions set
forth in this manual. Within a few minutes you will be getting your body into
shape and on your way to achieving a happier and healthier lifestyle.
Should you have any questions, please call our Customer Service
Department toll-free number, 1 (800) 375-7520, Monday - Friday,
8:00 A.M. - 5:00 P.M., Central Time.
3
BEFORE YOU BEGIN
Although Stamina tries to manufacture its products
with the finest materials and uses the highest
standards of manufacturing, occasionally a part that
does not fit, is the incorrect size, or is otherwise
inappropriate is found. Even with the highest
inspection and quality controls in place these things
will happen occasionally. Please do not return the
product. For your convenience, Stamina has a
Customer Service Department with a toll-free
number. If a part is missing, does not fit, is the
incorrect size, or is otherwise inappropriate, please
call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M.
and 5:00 P.M. Central Time, Monday through Friday.
Our operators will be able to assist you with your
problem and the parts will be mailed directly to your
house.
Thank you for choosing the hi-lo Cycle 100. We
take great pride in producing this quality product and
hope it will provide many hours of quality exercise
to make you feel better, look better and enjoy life to
its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The hi-lo Cycle 100
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the hi-lo
Cycle 100.
Right Pedal
Meter
Right Cover
Crank
Tension Knob
Front Stabilizer
Stand Cap
Locking Knob
Left Pedal
Main Frame
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
Wrench
4
HARDWARE ILLUSTRATIONS
This chart is provided to help identify some of the small parts used in the assembly of this product. This
sheet may not include all the hardware needed to assemble your product. It is intended to be used as a
guide to help simplify your assembly process.
INCHES
Acorn Nut
Thin Nylock Nut
Spacer
Standard Nut
3/16"
1/2
1/4"
5/16"
3/8"
1/2
0
0
1
1/2
2
3
in.
Nylock Nut
Bushing
mm.
10 20 30
40 50 60 70
6
8
10
MILLIMETERS
Place washers, the end of bolts or screws on
the circles to check for the correct size. Use
the small scale to check the sizes of bolts and
screws.
Flat Washer
Lock Washer
Length
Hex Head Bolt
Socket Head Screw
Retainer
Retainer Cap
Hex Head Bolt Top
Round
Plug
Square
Plug
Carriage Bolt
Phillips Head Screw
Flat Head Screw
5
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
RIGHT
BRACKET
LEFT
STEP 1: Insert the FRONT STABILIZER(2) into the MAIN FRAME(1) and lock in position with the
LOCKING KNOB(31).
NOTE: Pull the FRONT STABILIZER(2) out for use. Push the FRONT STABILIZER(2) in for storage.
Adjust the FRONT STABILIZER(2) by loosening the LOCKING KNOB(31), then slide the
FRONT STABILIZER(2) to adjust the position. Tighten the LOCKING KNOB(31).
STEP 2
NOTE: The RIGHT PEDAL(6) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(6)
has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(5) has L stamped
on the end of the pedal shaft. The LEFT PEDAL(5) has left hand threads and is tightened by
turning counter clockwise.
Thread the RIGHT PEDAL(6) onto the right side of the CRANK(7) as shown. Tighten the pedal securely.
Do the same to attach the LEFT PEDAL(5) onto the left side of the CRANK(7).
STEP 3: Install two "AA" batteries into the back of the METER(29). Plug the SENSOR WIRE(28) to
the METER(29), then slide the METER(29) onto the Bracket on the MAIN FRAME(1).
6
USING THE ELECTRONICS METER
Pedal movement or push the BUTTON.
POWER ON :
POWER OFF : Automatic shut off after 4 minutes of inactivity.
FUNCTION BUTTON:
Press the button to select functions. Reset all functions to zero
by pressing the button and holding it down for four seconds.
FUNCTIONS:
The lower display automatically scans TIME, DISTANCE, and CALORIES in sequence
SCAN:
every 6 seconds.
The upper display displays current speed from 0.0 to 999.9 MPH.
Displays the time, from 1 sec up to 99:59 minutes.
Displays the distance, from zero to 99.99 miles.
SPEED:
TIME:
DISTANCE:
CALORIE:
Displays the calorie consumption, from zero to 999.9 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit. The Calorie display is not affected by the load
adjustment.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERY:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries. Refer to the illustration to
install or replace the batteries. Replace the Battery Door on the
meter.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
7
OPERATIONAL INSTRUCTIONS
FRONT STABILIZER ADJUSTMENT
Pull the FRONT STABILIZER(2) out for use. Push the
FRONT STABILIZER(2) in for storage. Adjust the
FRONT STABILIZER(2) by loosening the LOCKING
KNOB(31), then slide the FRONT STABILIZER(2) to
adjust the position. Tighten the LOCKING KNOB(31).
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(26)
clockwise. To decrease the load, turn the TENSION
KNOB(26) counterclockwise.
TENSION BELT ADJUSTMENT
Should the tension system not fulfill your needs it can be
readjusted following this procedure:
1. Turn the TENSION KNOB(26) to the loosest setting (counter-clockwise).
2.
3.
Lift the tab on the BUCKLE(23) to release the grip on the TENSION BELT(24).
If the tension is too loose, tighten the TENSION BELT(24) 1/4" and reset the BUCKLE(23).
If the tension is too tight, loosen the TENSION BELT(24) 1/4" and reset the BUCKLE(23).
Pedal to test the tension. If it is still not adequate continue to adjust the TENSION BELT(24) 1/4" at a
time until it is right for you.
4.
EXERCISE WORKOUT
Lower Body: Place the bike on the floor in front of a chair. Sit in
the chair and pedal the bike with your feet.
Caution: Do not stand up on the hi-lo Cycle 100.
Upper Body: Place the bike on a table or desk. Grasp the pedals
firmly with your hands and pedal the bike. This exercise can be
performed while seated or standing.
8
STORAGE
1.
2.
3.
To store the hi-lo Cycle 100 simply keep it in a clean dry place.
The hi-lo Cycle 100 is 16 1/8" long (min.) x 16" wide x 17 3/4" tall.
Grasp the Front and Rear Stabilizer to move the hi-lo Cycle 100. Do not use the Pedals to move the
hi-lo Cycle 100. The Pedals will move and the Crank may pinch your hand or fingers.
To avoid damage to the electronics, remove the batteries before storing the hi-lo Cycle 100 for one
year or more.
4.
MAINTENANCE
The safety and integrity designed into the hi-lo Cycle 100 can only be maintained when the hi-lo Cycle
100 is regularly examined for damage and wear. Special attention should be given to the following:
1. Adjust the TENSION KNOB(26) and verify that the TENSION BELT(24) provides tension. The
TENSION BELT(24) should provide many years of use.
2. Verify that the Pedals are tightened securely. If tightening is required, remember that the left Pedal has
left hand threads and is tightened by turning counterclockwise.
3. Do not step on any portion of the plastic cover when using the hi-lo Cycle 100. This can cause the
plastic cover to crack.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the hi-lo Cycle 100 removed from
service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the hi-lo Cycle 100.
7. Keep your hi-lo Cycle 100 clean by wiping with an absorbent cloth after use.
9
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years, or are severely overweight, you must start slowly and increase your time on the hi-lo Cycle
100 gradually: a few minutes per workout.
Initially, you may be able to exercise only for a few minutes in your target zone, however, your aerobic
fitness will improve over the next six to eight weeks. Don't be discouraged if it takes longer. It's important
to work at your own pace. Ultimately, you'll be able to exercise continuously for 30 minutes. The better your
aerobic fitness, the harder you will have to work to stay in your target zone. Please remember these
essentials:
Have your doctor review your training and diet programs to advise you of a workout routine you
should adopt.
Begin your training program slowly with realistic goals that have been set by you and your doctor.
Monitor your pulse frequently. Establish your target heart rate base on your age and condition.
Set up your hi-lo Cycle 100 on a flat, even surface at least 3 feet from walls and furniture.
EXERCISE INTENSITY
To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper
intensity level can be found by using your heart rate as a guide. For effective aerobic exercise, your heart
rate should be maintained at a level between 70% and 85% of your maximum heart rate as you exercise.
This is known as your target zone. You can find your target zone in the table below. Target zones are listed
for both unconditioned and conditioned persons according to age.
During the first few months of your exercise program, keep your
UNCONDITIONED
TARGET ZONE
(BEATS/MIN.)
CONDITIONED
TARGET ZONE
(BEATS/MIN.)
heart rate near the low end of your target zone as you exercise.
After a few months, your heart rate can be increased gradually
until it is near the middle of your target zone as you exercise.
AGE
20
25
30
35
40
45
50
55
60
65
70
75
80
85
138~167
136~166
135~164
134~162
132~161
131~159
129~156
127~155
126~153
125~151
123~150
122~147
120~146
118~144
133~162
132~160
130~158
129~156
127~155
125~153
124~150
122~149
121~147
119~145
118~144
117~142
115~140
114~139
To measure your heart rate, stop
exercising but continue moving your
legs or walking around and place two
fingers on your wrist. Take a six-
second heartbeat count and multiply
the results by 10 to find your heart rate.
For example, if your six-second
heartbeat count is 14, your heart rate
is 140 beats per minute. (A six-
second count is used because your heart rate will drop rapidly
when you stop exercising.) Adjust the intensity of your exercise
until your heart rate is at the proper level.
10
WARM-UP and COOL-DOWN
Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks,
jump rope, and running in place
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength
or aerobic training session is very important. Muscles stretch more easily at these times because of their
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30
seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Floor Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs. DO NOT
BOUNCE!
When the pull on the back of
the legs lessen, try a lower
position gradually.
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds. DO NOT
BOUNCE! Do this stretch
10 times. Repeat the stretch
with the left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE! Hold the
position a minimum of 10
seconds. Repeat pulling the
upper body to the left leg.
Do this stretch several times
slowly.
While sitting on the floor,
have legs apart one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Remember always to check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to
return to the heart. Your cool-down should include the stretches listed above and should be completed
after each strength-training session.
11
PRODUCT PARTS DRAWING
FRONT
BACK
12
PARTS LIST
DIAGRAM#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Front Stabilizer
Left Cover
Right Cover
Left Pedal
Right Pedal
Crank
Bearing Housing
Ball Bearing
Inside Bearing Collar
Outside Bearing Collar
Bearing Washer
Bearing Snap Washer
Bearing Nut
Pulley
V-Ribbed Belt
Flywheel
Bearing (6000 zz)
Shaft (3/8"-26 x 3 1/2")
Spacer
Eye Bolt (M6 x 1 x 45mm)
Tension Bracket
Buckle
Tension Belt
Spring
Tension Knob
Magnet
Sensor Wire
Meter
Sleeve
Locking Knob
Stand Cap (38mm)
Screw, Round Head (M3 x 12mm)
Screw, Round Head (M4 x 20mm)
Screw, Flat Head (M5 x 0.8 x 10mm)
Nut (3/8" - 26 x 1/4" thick)
Nut (3/8" - 26 x 5/32" thick)
Nut (3/8" - 26 x 1/8" thick)
Nylock Nut (M6 x 1)
Wrench
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
2
1
1
2
2
1
1
1
1
1
1
1
1
1
4
2
5
1
2
1
1
2
1
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Manual
13
LIMITED WARRANTY
MODEL 15-0100
WARRANTY
Stamina Products, Inc. (the "Warrantor") warrants to the original purchaser only, that this product will be free
from defects in materials and workmanship under normal use, service and proper operation for a period of 90
days on the parts and 5 years on the frame from the date of the purchase by the original purchaser.
THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO
COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT
OR DAMAGE CAUSED BY REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER
THAN PARTS PROVIDED BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in
athletic clubs, health clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities
whether or not the product's use is in furtherance of a profit making enterprise, and all other use which is not
for personal, family, or household purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited
warranty, you will be requested to return the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1)
YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO
ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1)
YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY
OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE
REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty
or any implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,
at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed
warranty registration card is not required for warranty coverage, but is merely a way of establishing the date
and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL
OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED
WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
14
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina has a Customer Service
Department with a toll-free number. Should a part be missing or a defective part found, please call
1 (800) 375-7520 (in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday
or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service
Department will be able to assist you with your problem and the part will be mailed directly to your
house.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
CUSTOMER SERVICE
MAIL
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
CUSTOMER SERVICE
Fax: (417) 889-8064
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms.:
Address:
City:
Apt. #:
Zip Code:
IMPORTANT: We must have your phone number in order to process the order!
Work Phone #: (
State:
Phone #: (
)
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT: Before filling out the form below make sure you have the right information. Refer
to the parts list to make sure you're ordering the right parts!
PART #
DESCRIPTION
QUANTITY
1
EXAMPLE:
1
Rear Unit Assembly
|