Size: 205mm(W) x 290mm(H) #8544
INSTRUCTION MANUAL MODEL OT-03
Introduction
Congratulations on your purchase of the Digital Oven Thermometer and Electronic Timer. As most professional cooks know, oven temperatures can vary greatly from
the set temperature showing on the oven dials. In order to cook perfectly you must know the real temperature of the oven.This digital thermometer gives you the
average temperature of the oven during the time food has been cooking after the initial warm up period. It will also alert you if your oven goes 15° Fahrenheit under
or over the set temperature.
How Ovens Work
Oven temperatures work on a wave cycle with the thermostat. Simply, if the oven is set for 350°F the oven will continue to heat until the temperature is usually
about 25° over the set temperature. At this time the oven will shut off and cool to about 25°F below the set temperature and continue this cycle throughout the
cooking process.The graph shown below illustrates this process.
OVEN TEMPERATURE
375°F
350°F
325°F
The Digital Oven Thermometer is a unique device that differs from older oven thermometers that only showed the temperature at that time of measurement.This
thermometer takes continual readings every ten seconds and averages them from the time your oven has been on since reaching 30°F below the set temperature.
With your Digital Oven Thermometer it is now possible to know the actual temperature at which you have been baking or roasing for a specific period of time.
Another benefit of the Digital Oven Thermometer is that it can be viewed without opening the oven door, which can be extremely important during baking since an
open door can reduce the temperature in the oven over 100°F and disturb the baking cycle.
Components
- electronic unit with LCD
- detachable stainless steel probe sensor
- detachable stainless steel clip
MAGNET
1
M A V E R I C K
- AAA battery
OVEN
TEMP
Features
OPTIMAL
ALERT
TEMP
LCD (Liquid Crystal Display) -
TIMER
H
M
S
Displays all icons, temperature and time.
See LCD diagram for detailed information.
E
Battery Compartment - Holds 1 AAA battery.
5
7
+
Stand - Stand unit on tabletop or unclip and re-clip on back of unit to make hanging bracket.
Magnet - Stick unit to any metal surface.
A
E
POWER
ON
OFF
ALERT
ON
OFF
HR
SEC
8
MIN
°C/°F
Buttons
1. START/STOP - Starts or stops temperature alert warning and timer.
2. Hr - Sets hour of timer
3. MIN - Set minutes of timer, Press MIN & SEC together resets timer to zero.
4. SEC- Set seconds of timer, Press MIN & SEC together resets timer to zero.
5. "+" "-" - Set alert temperature.
STAND
BATTERY
2
6
3
4
COMPARTMENT
6. °C/°F - Toggle the temperature reading between °C/°F.
PROBE SENSOR
Switch
7. POWER ON/OFF - Turns unit on or off.
8. ALERT ON/OFF - Switches alert mode on or off.
LCD
1
1. Oven probe temperature (122°F - 572°F).
2. Oven alert temperature (122°F - 572°F).
OVEN
TEMP
1
3. Above-temp alert icon
OR
3
4. Below-temp alert icon
5. Optimal icon
6. Timer
OPTIMAL
5
4
ALERT
TEMP
2
6
7. Alert On icon
TIMER
H
M
S
2
3
Temperature sensing and timer features:
* Make sure probe is properly mounted to the stainless steel
clip and clip it to the wires of the rack inside your oven.
Preset oven alert temperature at 300°F.
Set your own specific optimal temperature for your oven.
Above temperature alert.
Below temperature alert.
20 hours countdown/count up timer.
Averages oven temperature and displays it every 10 seconds.
Set oven Alert Temperature for Oven
Slide Power switch to ON .
Slide Alert switch to OFF position, then press "+" or "-" button to set your own specific temperature. Press and hold the button for fast setting .
Slide Alert switch to ON position the ALERT ON icon will appear on the LCD.
Temperture Alert
Unit will display actual oven temperature every 10 seconds if oven temperature is above 122°F but still 30°F below your oven alert temperature.
Unit will average and display the oven temperature when the oven temperature hits trigger point of 30 F below oven alert temperature.The ALERT ON icon will flash
and the unit will beep 3 times indicating the trigger point has been crossed and the oven temperature display is now the average oven temperature averaged and
displayed every 10 seconds.
Above temperature alert will beep and flash when the average oven temperature is 15°F above the set alert temperature for 30 seconds.
Below temperature alert will beep and flash when the average oven temperature is 15°F below the set alert temperature for 30 seconds or if the average oven
temperature does not reach within 15°F of the alert temperature within 5 minutes of the trigger point.
If the above or below alert beeps and flashes because the average oven temperature is 15°F out of alert temperature range you can press START/STOP to
temporarily stop the beeping .The unit will beep every minute for 5 seconds as long as the average oven temperature is out of range.You can also slide the Alert
switch to Off† to suspend all beeping.
If the average oven temperature is within +/- 15°F of the alert temperature the OPTIMAL icon will be displayed.
|