Agri Fab Power Roller 24192 User Manual

SAFETY PRECAUTIONS  
ASSEMBLY INSTRUCTIONS  
(SEE ILLUSTRATION BELOW)  
1. Never attach a garden hose to the fill/drain hole  
when filling. Dangerous pressure build up could  
occur inside roller.  
2. Do not fill roller to maximum weight without check-  
ing capability of vehicle to safely pull and stop.  
3. Never use roller up and down hills; always work across  
hills and slopes.  
1. Assemble bearings (Ref. 5) into hitch tubes (Ref.  
3) so that bearing flange is against outside of hitch  
tube. (You may need to place a block of wood  
against bearing and carefully tap with a hammer.)  
2. Place hitch tubes (Ref. 3) onto both ends of roller  
shaft. Assemble a flat washer (Ref. 6) onto each  
end of roller shaft and secure with two cotter pins  
(Ref. 12).  
4. Use caution when turning, slowing or stopping.  
5. Always drain roller to keep from freezing.  
3. Assemble scraper bar (Ref. 2) to hitch tubes (Ref.  
3) using two hex bolts (Ref. 9) and hex lock nuts  
(Ref. 10). Do not tighten yet.  
4. Assemble ends of hitch tubes (Ref. 3) together  
using two hex bolts (Ref. 7) and hex lock nuts (Ref.  
10). Do not tighten yet.  
SPECIFICATIONS:  
Roller Drum:  
O.A. Width:  
Bearings:  
24" Dia. x 48" Wide Welded Steel  
Approximately 52"  
5. Assemble hitch brackets (Ref. 4) to hitch tubes  
(Ref. 3) using two hex bolts (Ref. 8) and hex lock  
nuts (Ref.10 ). Do not tighten yet.  
1" I.D., Replaceable  
6. Tighten bolts and nuts starting with scraper bar  
(Ref. 2), then ends of hitch tubes (Ref. 3), and  
finally hitch brackets (Ref. 4).  
Tow Hitch:  
Std. Pin Type - 1/2" Hole  
Weight w/ Water: Up to 910 Lbs. Filled with Water  
(Note: May be filled with sand)  
7. Install hitch pin (Ref. 13) through hitch brackets  
(Ref. 4) and secure with hair cotter pin (Ref. 14).  
Approx. Sh. Wt.: Approximately 165 Lbs.  
6
12  
5
1
11  
9
3
2
10  
5
10  
8
6
12  
10  
9
3
4
10  
7
Ref. Part Qty. Description  
No. No.  
Ref. Part Qty. Description  
No. No.  
1
2
3
4
5
6
7
62811  
24868  
48376  
24192  
43632  
43528  
46782  
1
1
2
2
2
2
2
Roller Assembly  
Scraper Bar  
Hitch Tube  
Hitch Bracket  
Bearing, Plastic  
Flat Washer, 1"  
8
9
43224  
43084  
2
2
6
1
2
1
1
Hex Bolt, 5/16-18 x 2-1/4"  
Hex Bolt, 5/16-18 x 1-3/4"  
Hex Lock Nut, 5/16-18  
Plug, Lawn Roller  
Cotter Pin, 5/32" x 1-1/2"  
Hitch Pin  
10 43064  
11 43709  
12 43501  
13 47623  
Hex Bolt, 5/16-18 x 3" 14 43343  
Hair Cotter Pin 1/8"  
REPAIR PARTS  
303 West Raymond  
Sullivan, IL. 61951  
217-728-8388  
Printed in USA  
Form No. 48447 (REV. 5/02)  
 

Acer Computer Monitor P221W User Manual
ADC Network Card FL1000 User Manual
AdobeAir Humidifier P500A User Manual
Advantech Personal Computer SOM A2558 User Manual
AEG Washer 72330 User Manual
Amana Microwave Oven AMC4080AAQ User Manual
AMD Computer Hardware LX 600@07W User Manual
Anaheimr DPJ72LC2 User Manual
ATN Binoculars NVM 14 CGT User Manual
AVerMedia Technologies Satellite TV System 1500 MCE User Manual