Aiwa Stereo System CSD FD82 User Manual

OPERATING INSTRUCTIONS  
INSTRUCCIONES DE MANEJO  
MODE D’EMPLOI  
CSD-FD92  
CSD-FD82  
COMPACT DISC STEREO RADIO CASSETTE  
RECORDER  
RADIOCASETE ESTÉREO CON REPRODUCTOR  
DE DISCOS COMPACTOS  
RADIO-CASSETTE LECTEUR DE CD STEREO  
English : See page 2.  
En  
E
Español : Ver la página 12.  
Français : Voir page 22.  
F
8B-CHE-903-01  
001225ACK-I-M  
U
 
Specifications  
the outlet. To avoid defeating the safety feature of  
the polarized plug, do not force it into a power outlet.  
AC power cord  
- When disconnecting the AC power cord, pull it out  
by the AC power plug. Do not pull the cord itself.  
- Never handle the AC power plug with wet hands,  
as this could result in fire or shock.  
- Power cords should be firmly secured to avoid  
being bent, pinched, or walked upon. Pay  
particular attention to the cord from the unit to the  
power socket.  
- Avoid overloading AC outlets and extension cords  
beyond their capacity, as this could result in fire or  
shock.  
Tuner section  
Frequency range, antenna — FM: 87.5 - 108.0 MHz  
Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz  
step) Ferrite bar antenna  
3
Deck section  
Track format — 4 tracks, 2 channels / Frequency range  
— Normal tape: 50 - 12,500 Hz (EIAJ) / Recording  
system — AC bias / Erasing system — AC erase /  
Heads — Recording/playback head (1), Erasure head  
(1)  
CD player section  
Disc — Compact disc / Scanning method — Non-  
contact optical scanner (semiconductor laser)  
4
5
Extension cord - To help prevent electric shock, do  
not use a polarized AC power plug with an extension  
cord, receptacle, or other outlet unless the polarized  
plug can be completely inserted to prevent exposure  
of the blades of the plug.  
When not in use - Unplug the AC power cord from  
the AC outlet or remove all the batteries if the unit  
will not be used for several months or more. When  
the cord is plugged in, a small amount of current  
continues to flow to the unit, even when the power is  
turned off.  
General  
Speaker — 100 mm cone type (2), 36 mm cone type (2)  
/ Output — Headphones jack (stereo mini-jack) / Power  
output — 2.5 W + 2.5 W (EIAJ, 7 ohms DC) / Power  
requirements — DC 12 V using eight size C (R14)  
batteries, AC 120 V, 60 Hz / Power consumption — 15  
W / Dimensions (W × H × D) — 460 × 192 × 262 mm  
1
5
3
(18 / × 7 / × 10 / in.) / Weight (excluding batteries)  
8
8
8
— 4.0 kg (8 lbs. 13 oz.) / Accessories — Remote  
control (1), AC cord (1)  
Specifications and external appearance are subject to  
change without notice.  
Maintenance  
Clean the unit only as recommended in the Operating  
Instructions.  
En  
COPYRIGHT  
Please check the copyright laws relating to  
recordings from disc, radio or external tape for the  
country in which the machine is being used.  
Damage Requiring Service  
Have the units serviced by a qualified service  
technician if:  
- The AC power cord or plug has been damaged  
- Foreign objects or liquid have got inside the unit  
- The unit has been exposed to rain or water  
- The unit does not seem to operate normally  
- The unit exhibits a marked change in performance  
- The unit has been dropped, or the cabinet has been  
damaged  
DO NOT ATTEMPT TO SERVICE THE UNIT  
YOURSELF.  
If an erroneous display or malfunction occurs  
Turn off the unit and press POWER STANDBY/ON6  
while pressing s.  
If the unit cannot be reset in the way above, disconnect  
the AC cord and remove all the batteries to turn off the  
display.  
Leave the unit for a while and turn the power back on.  
 
ENGLISH 3  
Power supply  
Using on batteries  
Open the lid of the battery compartment on the rear and  
insert eight R14 (size C) batteries, not supplied, as  
illustrated below. Then close the lid.  
OPE/BATT  
To switch from AC power supply to battery supply,  
disconnect the AC cord from the AC inlet.  
The OPE/BATT indicator lights up while the power is  
on.  
R14 (C)  
Using on AC house current  
When the OPE/BATT indicator becomes dim, volume  
decreases, or sound is distorted during operation,  
replace the batteries.  
Connect the AC cord as illustrated below.  
When the batteries become weak during tape  
operation, “Lo” flashes in the display and the unit will  
be stopped or turned off. Replace the batteries.  
Notes on batteries  
To avoid damage from leakage or explosion, observe  
the following:  
1 to the AC inlet of  
the unit  
2 to an AC outlet  
(AC 120 V, 60 Hz)  
• Insert the batteries with the 0 and 9 marks correctly  
aligned.  
supplied AC cord  
• Do not mix different types of batteries or old batteries  
with new ones.  
• When the unit is not to be used for a long period,  
remove the batteries.  
• Never recharge the batteries, apply heat to them or  
take them apart.  
• The rated voltage of the unit is 120 V AC.  
• If abnormal high voltage is supplied, “Hi” flashes in  
the display and the unit does not accept any  
operation. Disconnect the AC cord.  
• Remove dead batteries.  
If liquid leaks from the batteries, wipe thoroughly to  
remove.  
CAUTION  
Use only the supplied AC cord. Use with other cords  
may result in the risk of fire.  
Demo display  
When connecting the unit to an AC outlet for the first  
time, the demo display will begin automatically. The  
illuminations on the front panel also flash (CSD-FD92  
only).  
To turn off the demo, press *DISPLAY/COLOR/DEMO.  
You can turn it on or off by pressing DISPLAY/COLOR/  
DEMO while the power is off.  
* or DISPLAY on the remote control  
• When using the unit on the batteries, the demo is not  
displayed.  
• For ordinary use, turn off the demo to save power  
consumption.  
Changing the display color  
You can select the color of the display light:  
orange, blue, purple (or turned off).  
Press *DISPLAY/COLOR/DEMO repeatedly while  
the power is on.  
* or DISPLAY on the remote control  
• When using the unit on the batteries, the display  
light is off.  
Illuminations on the front panel (CSD-FD92  
only)  
The illuminations light up or flash while the power is  
on. In playback mode, they will show the  
approximate sound level.  
To turn off the illuminations, hold down *DISPLAY/  
COLOR/DEMO while the power is on. To resume,  
hold it down again.  
* or DISPLAY on the remote control  
• When using the unit on the batteries, the  
illuminations are off.  
 
4 ENGLISH  
Remote control  
Insert two R6 (size AA) batteries.  
R6 (AA)  
When the reach of the remote control signal is less than  
5 meters (16 feet), replace the batteries.  
The remote control may not operate correctly  
when:  
- The unit is exposed to intense light, such as direct  
sunlight  
- Objects block the remote control signal to the unit  
To use the buttons on the remote control  
Buttons on the remote control and the main unit with  
identical indications have the same functions.  
To turn the power on  
Press POWER to turn on the display.  
When using the unit on the batteries, this button will not  
turn the power on.  
En  
To turn the power off  
Press POWER to turn off the display.  
To use the FUNCTION button  
Each time FUNCTION is pressed while the power is on,  
the function is selected cyclically.  
Maintenance  
To clean the cabinet  
CD  
TAPE  
TUNER  
Use a soft cloth lightly moistened with mild  
detergent solution. Do not use strong solvents  
such as alcohol, benzine or thinner.  
To clean the heads  
When the tape heads are dirty;  
- high frequency sound is not emitted  
- the sound is not adequately high  
- the sound is off-balance  
FUNCTION  
POWER  
- the tape cannot be erased  
- the tape cannot be recorded on  
After every 10 hours of use, clean the tape heads  
with a head cleaning cassette.  
Use separately sold dry-type or wet-type cleaning  
cassette.  
Refer to the instructions of the cleaning cassette  
for details.  
Lens  
To clean the lens  
Use a cotton swab  
slightly moistened with  
cleaning fluid. Wipe  
gently from the center  
to the edge.  
 
ENGLISH 5  
PHONES\  
VOL  
UP,  
DOWN  
a PAUSE/SET  
TUNER/BAND  
s STOP/CLEAR  
POWER STANDBY/  
ON6  
d PLAY/DIR/PRESET  
(c PLAY/PRESET)  
QSOUND, T-BASS,  
3-MODE EQ  
r, t  
(TUNING -, +)  
REPEAT/  
MODE/SLEEP  
TUNER OPERATION  
A
1 Press *TUNER/BAND repeatedly to  
*REPEAT/MODE/SLEEP  
- If an FM stereo broadcast contains noise, press the  
button so that is displayed.  
Noise is reduced, although reception is monaural.  
To restore stereo reception, press the button again.  
- If a high-pitched sound is heard during AM recording,  
press the button repeatedly to display “b1” or “b2”, so  
as to eliminate the noise.  
select the desired band.  
FM  
AM  
The power is turned on and the previously tuned  
station is received.  
* or BAND on the remote control (applicable  
when the AC cord is connected)  
* or MODE on the remote control  
2 Press r, t (TUNING -, +) to select  
a station.  
To change the AM tuning interval  
The default setting of the AM tuning interval is 10 kHz/  
step. If you use the unit in an area where the frequency  
allocation system is 9 kHz/step, change the interval as  
follows.  
After listening, press POWER STANDBY/ON6 to  
turn the power off.  
For better reception  
1
2
Press TUNER/BAND.  
Press POWER STANDBY/ON6 while pressing  
TUNER/BAND.  
FM  
AM  
When the AM tuning interval is changed, the preset  
stations are cleared.  
NOTE  
If the unit picks up noise from other electrical  
appliances nearby, like a TV or fluorescent lights, move  
the unit.  
Extend the rod antenna  
and orient it for the best  
reception.  
The antenna is inside the  
unit. Position the unit for  
the best reception.  
For quick tuning (Auto Search)  
Keep r, t pressed until the tuner starts  
searching for a station. When a station is tuned to, the  
search stops.  
If the broadcast signal is weak, it does not stop. To  
stop the search manually, press r or t.  
To listen with the headphones  
Connect headphones with a stereo mini plug to the  
PHONES \ jack on the rear of the unit.  
 
6 ENGLISH  
SOUND ADJUSTMENT  
0-9, +10  
MODE  
Volume or tone adjustment does not affect  
recording.  
EQ  
BAND  
VOL (volume)  
VOL i, k  
Press VOL  
UP or  
DOWN. The volume  
c PLAY  
level is displayed as a number from 0 to 25.  
• The volume level is automatically set to 14 if the  
power is turned off when the volume level is set  
to 15 or more.  
a PAUSE  
s STOP  
r, t  
*3-MODE EQ (equalizer)  
Press 3-MODE EQ repeatedly until the desired  
mode is displayed.  
The equalizer mode changes to R (Rock), P (Pop),  
J (Jazz) or no equalization, cyclically.  
Rock - Emphasizes the high and low range of  
music.  
PRESETTING STATIONS  
Pop - Emphasizes voice and midrange of music.  
Jazz - Emphasizes the low range of music.  
* or EQ on the remote control  
You can preset up to 15 stations in each band.  
1 Select a station.  
2 Press *a PAUSE/SET once so that “M” is  
T-BASS system  
The T-BASS system enhances the realism of low-  
frequency sound.  
displayed to store the station.  
A station is assigned a preset number, beginning  
from 1 in consecutive order for each band.  
Press T-BASS to turn it on or off.  
Preset number  
QSOUND system  
En  
This system provides a rich, three dimensional  
sound area for stereo sources.  
You can enjoy more enhanced sound.  
Press QSOUND and the QSOUND indicator lights  
up.  
Frequency  
• At higher volumes, turning QSOUND on may  
cause sound distortion. In this case, make the  
volume down.  
* or a PAUSE on the remote control  
3 Repeat steps 1 and 2.  
The next station will not be stored if a total of 15  
preset stations have already been stored for a  
band.  
To listen to preset stations  
Select a band then press d PLAY/DIR/PRESET  
(c PLAY/PRESET) repeatedly.  
c PLAY on the remote control is also available.  
To select a preset number directly with the  
remote control  
Press the numbered buttons 0-9 and +10.  
Example:  
To select number 15, press +10 and 5.  
To select number 10, press +10 and 0.  
To clear a preset station  
Select the preset number first. Press s, and press a  
within 4 seconds.  
The higher numbers in the band are decreased by one.  
 
ENGLISH 7  
a PAUSE/SET  
s STOP/CLEAR  
CD  
d PLAY/DIR/PRESET  
(c PLAY/PRESET)  
POWER STANDBY/  
ON6  
r, t  
REPEAT/  
MODE/SLEEP  
CD OPERATION  
B
To start play when the power is off, press CD. The  
power is turned on and play of the loaded disc begins  
(Direct Play Function).  
If you load a disc while the CD indicator flashes in step  
2, play starts without pressing d (c).  
1 Press CD.  
The power is turned on.  
2 Press PUSH OPEN to open the disc  
compartment. Place a disc with the  
printed side up and close the disc  
compartment.  
To select a track directly with the remote control,  
press the numbered buttons 0-9 and +10. CD play  
starts from the selected track and continues to the last  
track.  
PUSH OPEN  
Example:  
To select number 25, press +10, +10 and 5.  
To select number 10, press +10 and 0.  
After listening, press POWER STANDBY/ON6 to turn  
the power off.  
Total number of tracks and total playing time are  
displayed. It will take about 15 seconds when  
loading a CD-RW disc.  
NOTE  
• Do not use irregular shape CDs (example: heart-  
shaped, octagonal ones).  
It may result in malfunctions.  
• Do not place more than one disc in the disc  
compartment.  
3 Press d PLAY/DIR/PRESET (c PLAY/  
PRESET) to start play.  
The number of the track being played and elapsed  
playing time are displayed.  
• Do not try to open the disc compartment during play.  
• Do not touch the lens. Doing so may cause  
malfunctions.  
• The unit may not play a CD-R/RW disc that is  
recorded on personal computers or some kinds of  
CD-R/RW recorders because of differences in  
recording platforms.  
• Do not attach any seal or label to either side (the  
recordable side or the labeled side) of a CD-R/RW  
disc. It may cause malfunction.  
s STOP/CLEAR – Stops play.  
a PAUSE/SET – Pauses play. To resume play, press  
again.  
r,t – Searches for a particular point during  
playback. Hold down r or t and then release  
it.  
– Skips to the beginning of a track. Press r or  
t repeatedly.  
• Do not load an unrecorded CD-R/RW disc. It will take  
over 30 seconds to read the disc. The disc may be  
damaged if you try to open the disc compartment  
while reading the disc.  
 
8 ENGLISH  
0-9, +10  
REPEAT  
MODE  
c PLAY  
a PAUSE  
r, t  
s STOP  
REPEAT, RANDOM PLAY  
PROGRAMMED PLAY  
A single track or all tracks can be played repeatedly,  
and all the tracks randomly. Random play can be  
repeated as well.  
Up to 30 tracks can be programmed from the disc.  
1 In stop mode, press *REPEAT/MODE/  
SLEEP.  
“RANDOM M” flashes in the display.  
* or MODE on the remote control  
Repeat play  
In playback mode, press *REPEAT/MODE/SLEEP  
repeatedly to select  
: Repeats all the tracks.  
: Repeats a single track. Select a track with r or  
t.  
To cancel, press the button repeatedly so that  
disappears.  
or  
.
2 Press r or t to select a track, then  
press a PAUSE/SET to store it.  
En  
Selected track number  
* or MODE on the remote control. REPEAT on the  
remote control can be used in any mode.  
Random play  
Program number  
Total playing time of the  
selected tracks  
In stop mode, press *REPEAT/MODE/SLEEP once so  
that “RANDOM M” is displayed. Press d (c) to start  
playback.  
To cancel, press REPEAT/MODE/SLEEP or s in stop  
mode.  
To select a track with the remote control  
Press the numbered buttons 0-9 and +10.  
3 Repeat step 2 to program other tracks.  
4 Press d (c) to start play.  
* or MODE on the remote control.  
NOTE  
• During random play, you cannot skip back to the  
previous track with r.  
• When selecting a track with the numbered buttons,  
random play is canceled.  
To check the program, press r or t in playback  
mode.  
To clear the program, press s once in stop mode so  
that “M” disappears in the display.  
To add tracks to the program, repeat step 2 in stop  
mode. The track will be programmed after the last track.  
To change the programmed tracks, clear the  
program and repeat all the steps again.  
NOTE  
The total playing time of the selected tracks will be  
displayed as “--:--” .  
- When it exceeds “99:59”.  
- When a track number 31 or higher is selected.  
 
ENGLISH 9  
a PAUSE/SET  
s STOP/CLEAR  
TAPE  
d PLAY/DIR/PRESET  
(c PLAY/PRESET)  
POWER STANDBY/  
ON6  
r, t  
REPEAT/  
MODE/SLEEP  
w REC/REC MUTE  
TAPE OPERATION  
C
• Use Type I (normal) tapes only.  
CSD-FD92 plays (records on) both sides.  
CSD-FD82 plays (records on) the side facing up.  
For CSD-FD92  
To change the playback side, press d during play.  
: Plays the side facing up (indicated for CSD-  
FD82 as well).  
PLAYBACK  
: Plays the opposite side.  
To select a reverse mode, press *REPEAT/MODE/  
SLEEP repeatedly.  
1 Press TAPE.  
: Plays one side only.  
: Plays both sides once. Play stops at the end of  
the reverse side.  
The power is turned on.  
If the tape has been inserted, play begins.  
2 Press PUSH EJECT to open the cassette  
holder and insert a tape with the side to  
be played facing up and the exposed  
side facing forward.  
: Plays both sides repeatedly.  
* or MODE on the remote control  
RECORDING  
1 Insert a tape with the side to be recorded  
on facing up and the exposed side facing  
forward.  
PUSH EJECT  
For CSD-FD92, press REPEAT/MODE/SLEEP to  
select the reverse mode.  
: Records on one side only.  
Press PUSH EJECT to close.  
or  
is displayed, so as to start recording from the  
side facing up.  
: Records on both sides. Check that  
3 Press d PLAY/DIR/PRESET (c PLAY/  
PRESET) to start playback.  
2 Get ready to record from the source.  
To record from a CD, press CD and load the disc.  
To record from a radio broadcast, press TUNER/  
BAND and tune to a station.  
Tape counter  
3 Press w REC/REC MUTE to start  
recording.  
To set the tape counter to “0000”  
Press s in stop mode. The counter is also set to  
“0000” when opening the cassette holder.  
“REC” flashes on the display.  
When the selected function is CD, CD play and  
recording starts simultaneously.  
s STOP/CLEAR – Stops play.  
a PAUSE/SET – Pauses play. To resume play,  
press again.  
r/t – Rewinds/ fast forwards. To stop the  
winding, press s.  
To record only the selected tracks of a CD  
1
Follow steps 1 to 3 of PROGRAMMED PLAY on  
page 9 to program tracks.  
Press w.  
2
After listening, press POWER STANDBY/ON6 to  
turn the power off.  
 
10 ENGLISH  
SETTING THE SLEEP TIMER  
The unit can be turned off automatically at a  
specified time.  
1 Hold down *REPEAT/MODE/SLEEP  
until “SLEEP” flashes in the display.  
* or MODE on the remote control  
c PLAY  
a PAUSE  
r, t  
2 Within 4 seconds, press r or t to  
specify the time until the power is  
turned off.  
s STOP  
Each time it is pressed, the time changes  
between 10 and 180 minutes in 10-minute  
steps.  
To stop recording, press s. To stop CD play, press it  
again.  
Specified time  
To pause recording (only when the source is TUNER),  
press a. To resume, press it again.  
To erase recording, press TAPE and press w.  
After recording, press POWER STANDBY/ON6 to  
turn the power off.  
While the sleep timer works, “SLEEP” is  
displayed.  
To check the time remaining until the power  
is turned off  
Repeat step 1 shown above. The remaining time is  
displayed for 4 seconds.  
To insert blank spaces  
When recording from the radio, 4-second blank spaces  
can be inserted. These spaces are useful to locate the  
desired portion on the tape when playing back on other  
units with the “Music Sensor” function.  
To cancel the sleep timer  
En  
Repeat step 1 to display the remaining time and  
hold down REPEAT/MODE/SLEEP again until  
“OFF” is displayed.  
1
Press w REC/REC MUTE in recording or recording  
pause mode.  
“REC” indicator flashes quickly and the tape runs  
without recording for 4 seconds, then pauses.  
Press a to resume recording.  
Simple sleep timer setting  
Press REPEAT/MODE/SLEEP while the power is  
off. The unit is turned on with the last function, and  
the sleep timer is automatically turned on with the  
30-minute setting.  
2
To make blank spaces less than 4 seconds, press a  
while “REC” flashes quickly.  
To make blank spaces more than 4 seconds, press  
w again after the tape pauses.  
Select the function, if needed, and start playback.  
To prevent accidental erasure  
Break off the plastic tabs on the cassette tape with a  
screwdriver or other pointed tool after recording.  
To record on the tape again  
Cover the tab openings with adhesive tape, etc.  
Side A  
Tab for side A  
 
ENGLISH 11  
NOTE  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is  
no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
... Reorient or relocate the receiving antenna.  
... Increase the separation between the equipment and  
receiver.  
... Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
... Consult the dealer or an experienced radio/TV  
technician for help.  
CAUTION  
Modifications or adjustments to this product, which are  
not expressly approved by the manufacturer, may void  
the user’s right or authority to operate this product.  
Printed in Indonesia  
 

2JANE Gas Grill rz1715 User Manual
3Com Gas Grill GNS 430 430A User Manual
Acer Laptop Extensa 500 User Manual
Acoustic Research Headphones AWD209 User Manual
Agilent Technologies Cell Phone 8922M User Manual
Allied Telesis Computer Hardware x900 User Manual
American Audio Stereo Amplifier XDM 2221 User Manual
Ask Proxima Projector C2 COMPACT User Manual
Audiovox Remote Starter APS 686T User Manual
Audiovox Stereo System AV 428V User Manual