Axis Communications Marine Safety Devices A 120 V AC User Manual

INSTALLATION GUIDE  
AXIS Electrical Safety Kit A 120 V AC  
AXIS Electrical Safety Kit B 230 V AC  
 
Safeguards  
Please read through this Installation Guide carefully before installing the  
Axis product. Keep the Installation Guide for further reference.  
Store the Axis product in a dry and ventilated environment.  
Avoid exposing the Axis product to vibration, shocks or heavy  
pressure. Do not install the product on unstable brackets,  
unstable or vibrating surfaces or walls, since this could cause  
damage to the product.  
Only use applicable tools when installing the Axis product;  
excessive force could cause damage to the product.  
Do not use chemicals, caustic agents, or aerosol cleaners. Use a  
damp cloth for cleaning.  
Use only accessories that comply with technical specification of  
the product. These can be provided by Axis or a third party.  
Use only spare parts provided by or recommended by Axis.  
Do not attempt to repair the product by yourself, contact Axis  
or your Axis reseller for service matters.  
This Axis product shall be used in compliance with local laws  
and regulations.  
The Axis product should be installed by a trained professional.  
Observe relevant national and local regulations for the installa-  
tion.  
Transportation  
When transporting the Axis product, use the original packaging  
or equivalent to prevent damage to the product.  
 
 
AXIS Electrical Safety Kit A/B  
Page 5  
AXIS Electrical Safety Kit A/B  
Installation Guide  
This Installation Guide provides instructions for installing AXIS Electrical  
Safety Kit A 120 V AC and AXIS Electrical Safety Kit B 230 V AC in AXIS  
T98A-VE Surveillance Cabinet Series.  
The purpose of this kit is to provide surge protection, a fuse and an  
alarm-door switch to detect intrusion or vandalism of the cabinet.  
Installation steps  
1. Check the package contents against the list below.  
2. Hardware overview on page 6.  
3. Connection diagram on page 7.  
4. Install the devices on page 9.  
Install the door switch on page 12.  
Package contents  
Item  
Models/variants/notes  
Circuit breaker/ MCB fuse 4 A  
Fuse  
Terminal block  
Terminal block – ground (green/yellow) (2x)  
Terminal block – feed-through (blue)  
Surge protector Surge protector Class_2  
Door switch  
Cable  
Door switch with mounting screw  
Door switch cable with cable clip  
Printed  
Materials  
AXIS Electrical Safety Kit A/B Installation Guide  
(this document)  
 
Page 6  
AXIS Electrical Safety Kit A/B  
Hardware Overview  
1
2
3
4
5
6
7
1
2
3
4
5
6
7
MCB fuse 4 A (Circuit breaker)  
Surge protector 4 A  
Terminal block – feed-through (blue)  
Terminal block – ground (green/yellow)  
Terminal block – ground (green/yellow)  
Door switch  
Door switch cable  
In this document PE, Protective Earth, and Ground are referred to as  
ground.  
 
 
AXIS Electrical Safety Kit A/B  
Connection Diagram  
Page 7  
DOOR SWITCH  
5
CIRCUIT BREAKER/  
FUSE 4 A  
1
L
L1  
N
N1  
L
N
TO  
POWER  
SUPPLIES  
SURGE PROTECTOR  
230 V AC  
INCOMING  
MAINS VOLTAGE  
or  
3
120 V AC  
2
4
PE1  
PE  
TT - TNS - TNC - IT  
EXTERNAL PROTECTIVE  
BONDING WIRE  
1
2
3
4
5
MCB fuse 4 A (circuit breaker) L  
Line  
Neutral  
Protective earth (ground)  
Ground  
Incoming mains voltage  
Surge protector  
N
PE  
To power supplies  
Door switch  
If an external protective bonding wire is used it is recom-  
mended to have a miminum area of 6 mm2 (AWG 10) for indoor  
use and a minimum area of 10 mm2 (AWG 8) for outdoor use.  
The circuitry shall be connected to an external double pole cir-  
cuit breaker in the building installation.  
The door switch shall only be used for signal voltage (SELV) and  
shall not be connected to the mains voltage or power supply.  
 
 
Page 8  
AXIS Electrical Safety Kit A/B  
Check the surge protector after lightning strikes and replace if  
An additional fuse may be required in regions with severe light-  
ning strikes. To prevent unwanted triggering of the fuse, a  
higher rated fuse may replace the 4 A MCB fuse, following local  
regulations. In this case, put the 4 A MCB fuse after the surge  
protector.  
 
AXIS Electrical Safety Kit A/B  
Install the Devices  
Page 9  
The electrical connections and conduit installations shall be  
made by a certified electrician and in compliance with local  
regulations.  
Risk of electric shock. The mains supply shall be disconnected  
during installation.  
Keep the wires short but do not stretch them. Short wires give  
better surge protection than long wires.  
The ground wire should be as short as possible and have as  
large cross section as possible. Attach the ground wire to a  
suitable grounding point, for example an earth stake.  
1. Snap on the fuse, surge protector and terminal blocks on the DIN  
page 10. Make sure that the positions correspond to the slots in the  
device cover.  
See the User Guide provided with the surveillance cabinet for more  
information about the device cover.  
2. Connect the devices according to the connection diagram. See  
page 7. Use a cable of minimum 2.5 mm2 (AWG 14) for incoming  
mains voltage.  
3. Secure the cables. Use 2.8 Nm (25 lb-in) torque for the screw  
terminals.  
4. Attach the device cover to the cabinet base according to the  
instructions provided with the surveillance cabinet.  
 
 
Page 10  
AXIS Electrical Safety Kit A/B  
Example: AXIS Electrical Safety Kit A 120 V AC  
1 2 3 4 5  
L
PE  
1
0
4 A  
N
6
7 8 9  
1
2
3
4
5
6
7
8
9
Circuit breaker  
Surge protector  
Terminal block – feed-through (blue)  
Terminal block – ground (green/yellow)  
Terminal block – ground (green/yellow)  
Line connection  
Neutral connection  
Ground connection  
External ground connection  
L
N
 
 
AXIS Electrical Safety Kit A/B  
Page 11  
Example: AXIS Electrical Safety Kit B 230 V AC  
1 2 3 4 5  
L
N
1
0
4 A  
PE  
6
7 8 9  
1
2
3
4
5
6
7
8
9
Circuit breaker  
Surge protector  
Terminal block – feed-through (blue)  
Terminal block – ground (green/yellow)  
Terminal block – ground (green/yellow)  
Line connection  
Neutral connection  
Ground connection  
External ground connection  
L
N
 
Install the Door Switch  
The door switch included with the electrical safety kit can be connected  
to the I/O port on a camera or an I/O device. See the camera’s  
Installation Guide and User Manual for information about connecting  
and configuring the camera’s I/O port.  
1. Connect either of the connectors on the door switch cable to the  
common terminal on the door switch.  
2. Connect the other connector on the door switch cable to either of  
the terminals on the door switch, depending on the desired function  
of the switch.  
3. Put the door switch in the slot on the cabinet door and secure it  
with the supplied screw.  
7
2
3
4
1
6
5
Example image: AXIS T98A15-VE/T98A18-VE  
1
2
3
4
Door switch cable  
Common terminal  
Terminal (NO)  
4
5
6
Screw  
Cabinet door  
Actuator  
Terminal (NC)  
 
 
AXIS Electrical Safety Kit A/B  
Page 13  
4. If connecting to the I/O port on a camera, route the door switch  
cable through a cable gasket and attach the cable gasket to one of  
the cable holes in the cabinet door.  
5. Secure the cable to the door using the supplied cable clip.  
6. Connect the door switch cable to the I/O port on the camera or the  
I/O device.  
See the camera’s Installation Guide and User Manual for  
information about connecting and configuring the camera’s I/O  
port.  
7. Close the cabinet and make sure the switch is activated when the  
door is closed and released when the door is opened. If necessary  
bend the actuator.  
 
Page 14  
AXIS Electrical Safety Kit A/B  
Replace the Surge Protector  
The surge protector gets worn out by surges. The window on the surge  
protector shows the status of the device.  
1. When the entire window is red, pull out the module and replace it.  
alarm  
res  
on  
alarm  
res  
on  
 
 
AXIS Electrical Safety Kit A/B  
Technical Specifications  
Page 15  
General  
Function/group Item  
Specifications  
General  
Environment  
In a casing for indoor or outdoor use  
2
Pollution  
Degree  
Door switch  
Approvals  
EN61058  
UL1054  
Operating  
conditions  
-40 ºC to +85 ºC (-40 ºF to 185 ºF)  
Humidity 15 – 100% RH  
Terminal  
blocks  
Approvals  
UL1059  
CSA C22.2 No. 158  
EN 60947-1  
EN 60947-7-1  
 
 
Page 16  
AXIS Electrical Safety Kit A/B  
AXIS Electrical Safety Kit A 120 V AC  
Function/group Item  
Specifications  
Circuit  
Rated current 4A at 30°C (86°F)  
breaker/fuse  
Operating  
voltage  
Max 277 V AC  
50/60 Hz  
10 kA  
Rated  
frequencey  
Rated short-  
circuit capacity  
Tripping curve  
Approvals  
K
IEC/EN 60947-2  
UL 489  
CSA 22.2 No. 5  
Operating  
conditions  
-40 ºC to +75 ºC (-40 ºF to 167 ºF)  
Humidity 15 – 100% RH  
Surge  
Class  
2
protective  
device  
Nominal  
voltage  
120 V AC  
Max discharge 40 kA  
current Imax  
(8/20)  
Approvals  
IEC 61643-1 Ed2  
UL 1449 Ed3  
Operating  
conditions  
-40 ºC to +80 ºC (-40 ºF to 176 ºF)  
Humidity 15 – 100% RH  
 
AXIS Electrical Safety Kit A/B  
Page 17  
AXIS Electrical Safety Kit B 230 V AC  
Function/group Item  
Specifications  
Circuit  
Rated current 4A at 30°C (86°F)  
breaker/fuse  
Operating  
voltage  
Max 253 V AC  
Rated  
frequencey  
50/60 Hz  
6 kA  
Rated short-  
circuit capacity  
Tripping curve  
Approvals  
C
IEC/EN 60898-1  
IEC/EN 60947-2  
UL 1077  
CSA 22.2 No. 235  
Operating  
conditions  
-40 ºC to +75 ºC (-40 ºF to 167 ºF)  
Humidity 15 – 100% RH  
Surge  
Class  
2
protective  
device  
Nominal  
voltage  
230 V AC  
Max discharge 40 kA  
current Imax  
(8/20)  
Approvals  
IEC 61643-1  
EN 61643-11  
Operating  
conditions  
-40 ºC to +80 ºC (-40 ºF to 176 ºF)  
Humidity 15 – 100% RH  
 
Page 18  
AXIS Electrical Safety Kit A/B  
Warranty  
For information about Axis’ product warranty and thereto related  
 
 
Installation Guide  
Ver.2.10  
Printed: October 2012  
Part No. 48993  
AXIS Electrical Safety Kit A/B  
© Axis Communications AB, 2012  
 

3M Oxygen Equipment 38210Plus 8210 07048 8110S User Manual
Adcom Home Theater System GTP 880 User Manual
ADTRAN Network Card 3125 Gigabit Ethernet User Manual
Allied Telesis Computer Accessories The Allied Telesis SwitchBlade User Manual
Alpine CD Player CDA 7990 User Manual
American Audio CD Player DCD PRO300 User Manual
ATK Motorcycles Motorcycle 450 Dirt Track User Manual
Atlona Stereo Amplifier AT VGA300RL AT VGA10SS User Manual
Avocent Speaker System EMS1000P User Manual
Behringer Car Amplifier BX108 User Manual