Black Box TV Video Accessories LMC5001A User Manual

power strip instead of directly to branch circuit.  
18-Slot Rackmount Chassis  
Protect your chassis from exposure to sunlight and electrical or  
magnetic fields.  
Installation Guide  
LMC5001A — LMC5002A  
Ensure that the equipment rack remains stable, even with the  
addition of the chassis and its associated cabling.  
18-Slot Rackmount Chassis™ is a modular, SNMP-manageable  
media converter chassis designed to be used in conjunction with Black  
Box SNMP Manageable Modules (part numbers LMC5006C through  
LMC5035C).  
Tabletop Installation Instructions  
Be sure that the unit is placed on a suitable flat surface, leaving some  
space at the back of the unit to accommodate cooling. Attach the cables  
between the chassis and each device that will be interconnected, then  
plug the chassis into a reliable, filtered power source.  
18-Slot Rackmount Chassis come in both AC (LMC5001A) and DC  
(LMC5002A) versions and feature one slot for installing a Master  
Module (LMC5003A) and 18 slots for installing any combination of  
SNMP Manageable Modules. 18-Slot Rackmount Chassis ships with one  
100-240 ± 10% VAC (LMC5004AC) or -48 VDC (LMC5005DC) Power  
Supply Module and features an additional slot for a second, redundant  
power supply.  
Configuring and Installing Modules  
Refer to the installation guide shipped with the SNMP Manageable  
Module for configuration information. Master Modules come ready to  
install.  
18-Slot Rackmount Chassis can be installed either as a managed or  
unmanaged device. A managed 18-Slot Rackmount Chassis uses a  
Master Module.  
The process for installing these modules is simple. Remove the blank  
bracket covering the slot where you’ll be installing the module. Slide the  
module into the chassis, via the cardguides, until the module is seated  
securely in the connector. Secure the module to the chassis by tightening  
the captive screws.  
Installing 18-Slot Rackmount Chassis  
Before installing any SNMP Manageable Modules and/or Master  
Modules into the 18-Slot Rackmount Chassis, you should first install the  
18-Slot Rackmount Chassis itself.  
NOTE: The first slot, located closest to the left-side of the chassis  
(front view), is the management slot for the Master Module. Install  
a Master Module only if using SNMP-management capabilities.  
Otherwise, this slot must remain empty for the chassis and the  
SNMP Manageable Modules to function properly. The 18 slots to  
the right of the management slot are for SNMP Manageable  
Modules. Do not install a SNMP Manageable Module in the  
management slot or vice versa. SNMP Manageable Modules may,  
however, be installed in any order within the 18 slots.  
Rackmount Installation Instructions  
To install a rackmountable 18-Slot Rackmount Chassis, you will  
typically need four # 10 screws and four clip nuts. (Hardware may vary  
depending on rack type.) The rest of the hardware is supplied with the  
unit.  
First, mount the RETMA mounting ears to the chassis with the  
supplied hardware. Then locate a suitable location in the rack for  
installation and secure the clip-nuts onto the mounting rails. Use the  
screws to attach the chassis to the rack. Finally, attach the cables  
between the chassis and each device that will be interconnected, then  
plug the chassis into a reliable, filtered power source.  
When installing the chassis in an equipment rack, be sure to observe  
the following precautions to prevent electrical or mechanical damage:  
Stay within the chassis power rating to prevent overload of  
Figure 1: Installing a SNMP Manageable Module in an 18-Slot Rackmount Chassis  
supply circuits or damage to overcurrent protection and supply  
wiring.  
Maintain reliable earth ground, especially when connecting to  
2
1
 

Bissell Carpet Cleaner 76R9 User Manual
Black Box Electronic Accessory Industrial Serial to Multi mode Fiber Optic Converter User Manual
Black Decker Mixer M175 User Manual
Blanco Indoor Furnishings 157 091 User Manual
Braun Coffeemaker KF 590 User Manual
Braun Electric Shaver BS7511 User Manual
Brother Fax Machine MFC 685CW User Manual
Brother Printer DCP 115C User Manual
Califone Computer Hardware MCFM User Manual
Canon Scanner N1240U User Manual