CH Products Video Gaming Accessories 200571 User Manual

TM  
WARRANTY  
TM  
The CH Fighterstick USB is warranted to the original purchaser to be  
free from defects in materials and workmanship for a period of two(2)  
years from the date of purchase. During this warranty period  
CH PRODUCTS will, at its option, repair or replace, at no charge, any  
component determined to be defective.  
The liability under this warranty is limited to the repair or replacement  
of the defect or defective part(s) at our factory, and does not include  
shipping expenses.  
This warranty does not apply if, in the opinion of CH PRODUCTS, the unit  
has been damaged by accident, abuse, improper usage, or as a result of  
modification or service by anyone or anything other than CH PRODUCTS.  
NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT  
NOT LIMITED TO IMPLIED WARRANTIES OF SALABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE.  
Fighterstick USB  
Congratulations on your purchase of the CH Fighterstick USB! We are confident  
that you'll find it to be one of the most durable and precise joysticks you have  
ever owned. It was designed and manufactured in the U.S.A. with the same  
strict quality standards you have come to expect from CH Products. So get ready  
and strap yourself in, for you are about to experience a whole new level of  
controller realism.  
QUICK START: How to Install the CH FIGHTERSTICK USB  
INTRODUCTION  
REQUIREMENTS  
CH PRODUCTS IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES,  
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
This warranty gives you specific legal rights, and you may have additional  
rights which vary from state to state.  
- IBM Compatible PC running Windows 98, 98 SE, ME, 2000, or XP  
- One open USB port (one additional port for each additional USB device)  
- USB compatible software  
- Direct X 7.0a or later.  
To obtain warranty services contact CH PRODUCTS at 760-598-7833 to  
receive an RMA (Return Merchandise Authorization) Number and shipping  
instructions.  
WINDOWS 98/ME INSTALLATION  
1. With the computer booted up fully to the Windows desktop, insert the CD  
that was included with your stick.  
The enclosed software is made available and without warranties of ANY  
kind. All warranty claims made on CH PRODUCTS relating to defects which  
may be present are expressly excluded where this is legally permissible.  
CH PRODUCTS assumes no liability for the correctness, precision, or  
currency of the software or its accompanying documentation, nor for the  
suitability of the software for a specific purpose for normal market quality.  
The risk relating to usability of the running characteristics and the  
accompanying hardware lies with the user of the software. CH PRODUCTS  
shall not be liable for functional capability in a multiple users association,  
content, or performance of the software. The user shall bear all costs for  
correction of defects, costs for maintenance, repair or improvement and not  
CH PRODUCTS, its dealers, distributors, representatives, or employees.  
2. Install the CH Control Manager from this disk.  
3. Once the CH control Manager is installed, reboot the computer (The Control  
Manager may prompt you to do this, however if it does not, reboot the system  
manually.)  
4. Once the computer is booted back up and on the Windows Desktop, plug in  
the CH Fighterstick into an open USB port.  
5. A New Hardware Detection window should appear.  
6. Select Search for the Best Driver (recommended) then click Next*  
7. Click Next again*  
8. It may now ask you to insert your Windows CD. Place your Windows CD  
in the CD drive and click OK (If it says it can not find a certain file, Click Browse.  
Point it to the folder on your Windows CD called Win 98 or Win 9X then click OK)*  
9. Click Finish*  
10. You can test your Fighterstick in Windows Gaming Options. Gaming Options  
can be accessed by clicking Start, Settings, Control Panel, then Gaming Options.  
11. Once in Gaming Options, double click on the Fighterstick to access the  
Windows controller test screen.  
12. To calibrate the Fighterstick open the CH Control Manager and click on the  
"Calibrate Controllers" icon . Select the Fighterstick, click OK, and follow the  
on-screen instructions.  
*These may not appear in Windows ME  
Windows® 95/98/ME/2000/XP are registered trademarks of the Microsoft Corporation  
P/N: 800-423 (v3.1)  
© 2008 By CH Products (01/22/08/VS)  
 

Bel Canto Design Stereo Amplifier eVo2 User Manual
Blanco Indoor Furnishings 157 091 User Manual
Bosch Power Tools Drill PS22 02 User Manual
Braun Styling Iron EC 2 User Manual
Breville Toaster BT320 User Manual
Broan Indoor Furnishings CR92490 User Manual
Cadco Food Warmer CBC 2RT User Manual
Canon Fax Machine MF5750 User Manual
Casio Clock MO1106 EA User Manual
Cateye Bicycle Accessories CC ED300 User Manual