Fujitsu Printer FTP 608 Series User Manual

baTTEry drivE, FTP-608 Series  
2” HiGH SPEEd THErMaL PrinTEr  
FTP-628 MCL101#11/ #21  
Easy Loading Method  
n OvErviEw  
The easy loading FTP-608 MCL Series is ultra compact high  
speed, battery driven thermal printer, printing on 2-inch wide  
paper (58mm) where platens are removable. Our original  
platen removal mechanism improved paper loading and  
maintenance.  
The FTP-608 MCL series can be used for a variety of  
applications, such as portable terminals, POS, ticket  
issuing terminals, label printers, banking terminals, and  
measurement and medical equipment.  
n HiGHLiGHTS  
• Easy loading type  
Our original platen removal mechanism improved paper  
loading and maintenance.  
• Ultra compact  
Height ꢀ5.5 mm, width 70.2 mm, depth 33.0 mm for the 2  
inch model.  
• Low drive power  
3 or 5V operation.  
• High speed printing  
It can print at 60 mm/s (480 dotlines/s) maximum by using  
Fujitsu's unique head drive control.  
• High resolution printing  
8 dots/mm of resolution printing is possible.  
 
FTP-628MCL101#11/ #21  
n SPECiFiCaTiOnS  
Specification  
FTP-628MCL101#21  
Item  
FTP-628MCL101#11  
Interface  
Conforms to RS232C / Centronics  
averagecurrent  
4.2 to 8.5VDC,averagecurrent 2.7 to 7.2 VDC,  
2.4A (at 7.4 (3A)peak  
1.9A (3.8A) peak  
For print head  
Printing ratio: 12.5%, printing Printing ratio: 12.5%, printing  
Operating  
Voltage  
speed 60mm/sec. at 7.2 V  
speed 40mm/sec. at 4.2 V  
For motor  
4.2 to 8.5 VDC, 1 A max.  
2.7 to 7.2 VDC, 1 A max.  
For logic  
External dimensions  
Weight  
2.7 to 5.25 VDC, 0.1 A maximum  
70.2 x 33.0 x 15.5 mm (WxDxH)  
Approximately 42g  
Pulse resistance: 100 million pulses/dot (under our standard  
conditions). Abrasion resistance: paper traveling distance  
50km (print ratio: 25% or less)  
Head life  
Operating temperature*  
0˚ C to +50˚  
C
Operating humidity  
Operating  
20 to 85% RH (no condensation)  
-20˚ C to +60˚ C (paper not included )  
5 to 95% RH (no condensation )  
environment  
Storage temperature  
Storage humidity  
Head temperature  
Detected by thermistor  
Detection  
function  
detection  
Paper out/mark detection Detected by photo-interrupter  
High sensitive paper:  
TF50KS-E4 (Nippon Paper)  
TK50KS-E (Nippon Paper)  
PD150R (Oji Paper)  
FTP-020P0107 (58mm)  
Standard paper:  
TK60KS-F1 (Nippon Paper)  
FTP-020P0102 (58mm)  
PD170R (Oji Paper)  
AFP220VBB-1 (Mitsubishi  
Paper)  
Recommended thermal sensitive paper  
Medium life storage paper:  
PD160R-N (Oji Paper)  
AFP-235 (Mitsubishi Paper)  
TP50KJ-R (Nippon Paper)  
HA112AA (Nippon Paper)  
Long life storage paper:  
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)  
3
 
FTP-628MCL101#11/ #21  
n FUnCTiOn  
Item  
Item  
1. Test print function  
2. Paper out detection  
3. Paper near end detection  
8. Mark detection function  
9. MCU operation abnormality detection  
10. Power ON/OFF sequence protection  
Thermal head temperature abnormality  
4.  
11. Motor over-current protection  
12. Hardware timer  
detection  
5. Blow-out fuse detection  
6. Head voltage abnormality detection  
7. Motor power saving function  
n diMEnSiOnS  
1. Printer mechanism: 2- inch  
FTP-628MCL101#11/#21  
center of paper  
58.0  
24(paper end sensor)  
ꢀ0.7  
ꢀ5.5  
62.2  
64.7  
65.6±0.ꢀ  
4.6  
Unit: mm  
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).  
2. Dimension listed in ( ) is for reference  
4
 
FTP-628MCL101#11/ #21  
n PrinTEr COnnECTOr (FLExibLE PT bOard) Pin arrayS  
FTP-628 MCL101#11 / #21  
Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product  
No  
1
Signal  
I/ O Contents  
PHK  
VSEN  
PHE  
N.C.  
N.C.  
VH  
I
Cathode for photo interruptor  
2
paper sensor power  
Emittor for photo interruptor  
No connection  
3
O
I
4
5
No connection  
6
Head drive power  
7
VH  
8
DIN  
Data in  
9
CLK  
I
Synchronous clock for communication  
10 GND  
11 GND  
12 STB6  
13 STB5  
14 STB4  
15 VDD  
16 TH  
I
Ground power supply for thermal head  
Thermal head energizing control signal  
I
I
I
Logic power  
O
O
I
Thermally sensitive resistor input termnial 1  
Thermally sensitive resistor input termnial 2  
17 TH  
18 STB3  
19 STB2  
20 STB1  
21 GND  
22 GND  
23 LAT  
24 DO  
I
Thermal head energizing control signal  
I
I
Ground power supply for thermal head  
Data latch  
Data out  
O
I
25 VH  
Power supply for thermal head  
26 VH  
I
27 MT/A  
28 MT/A  
29 MT/B  
30 MT/B  
I
I
Stepping motor excitation signal  
I
I
Do not plug or unplug the FPC when power is on.  
5
 
FTP-628MCL101#11/ #21  
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo ꢀ4ꢀ, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2ꢀ32 WV Hoofddorp  
Netherlands  
Tel: (8ꢀ-3) 5449-70ꢀ0  
Tel: (3ꢀ-23) 55609ꢀ0  
Fax: (8ꢀ-3) 5449-2626  
Fax: (3ꢀ-23) 5560950  
north and South america  
Asia Pacific  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (ꢀ-408) 745-4900  
Fujitsu Components Asia Ltd.  
ꢀ02E Pasir Panjang Road  
#04-0ꢀ Citilink Warehouse Complex  
Singapore ꢀꢀ8529  
Fax: (ꢀ-408) 745-4970  
Tel: (65) 6375-8560  
Fax: (65) 6273-302ꢀ  
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective  
owners.  
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu  
Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 03/22/2006.  
6
 

Escort Scanner 9500CI User Manual
Extron electronic Stereo Receiver MTP 1500RL 15HD A SEQ User Manual
FEIN Power Tools Sander WPO 12 27E User Manual
Fellowes Chipper DM 4 User Manual
Freestyle Watch 39401 User Manual
Friedrich Air Conditioner CP18 User Manual
FujiFilm Digital Camera 320 IXZ User Manual
Garland Fryer S18SF User Manual
Gianni Industries Door DG 700 User Manual
Global Upholstery Co Indoor Furnishings 1970 3 User Manual