GE Iron 681131066716 User Manual

g
IRONS  
FER À REPASSER PLANCHA  
/
Model Numbers / Numéros de modèles / Números de Modelos:  
106671R, 169153, 106822R, 106820, 169133, 169134, 169159, 169194  
UPC: 681131066716, 681131691536, 681131068208, 681131691338, 681131691345,  
681131691598, 681131691949  
Customer Assistance / Service à la clientèle / Asistencia al Cliente  
1 877 207 0923 (US) • 1 877 556 0973 (Canada)  
Thank you for purchasing a GE small appliance.  
In keeping with the GE ecomagination initiative, please consider the option to recycle the packaging  
material and donate the properly functioning appliance and corresponding Use & Care Guide you  
are no longer using.  
To read more about GE’s ecomagination commitment visit:  
ge.ecomagination.com  
Merci d'avoir acheté ce petit appareil GE.  
Afin de poursuivre l'initiative écomagination de GE, veuillez recycler les matériaux d'emballage et faire don d'un  
appareil fonctionnant adéquatement que vous n'utilisez plus ainsi que le guide d'utilisation et d'entretien.  
Pour en savoir plus à propos de l'engagement écomagination de GE, visitez le site :  
ge.ecomagination.com  
Gracias por comprar un pequeño electrodoméstico de GE.  
Siguiendo la iniciativa ecoimaginación de GE, por favor considere la opción de reciclar el material de empacado  
y donar el aparato funcionando adecuadamente y la Guía de Cuidado y Uso correspondiente que ya no use.  
Para leer más sobre el compromiso de ecoimaginación de GE visite:  
ge.ecomagination.com  
 
IMPORTANT SAFETY INSTRUCTIONS  
When using electrical appliances, basic safety precautions should always be followed including  
the following:  
READ ALL INSTRUCTIONS BEFORE USING  
Use iron only for its intended use.  
To protect against risk of electric shock, do not immerse the iron in water or other liquids.  
The iron should always be turned to OFF ( O ) before plugging or unplugging from outlet.  
Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.  
Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Fully  
retract cord within unit or loop cord loosely around iron, as applicable, when storing.  
Always disconnect iron from electrical outlet when filling with water or emptying and when  
not in use.  
Do not operate iron with a damaged cord or if the iron has been dropped or damaged.  
To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer  
assistance number for information on examination and repair. Incorrect reassembly can  
cause a risk of electric shock when the iron is used.  
Close supervision is necessary for any appliance being used by or near children. Do not leave  
iron unattended while connected or on an ironing board.  
Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you  
turn a steam iron upside down – there may be hot water in the reservoir.  
SPECIAL INSTRUCTIONS  
To avoid a circuit overload, do not operate another high wattage appliance on the same  
circuit.  
If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords  
rated for less amperage may overheat. Care should be taken to arrange the cord so  
that it cannot be pulled or tripped over.  
SAVE THESE INSTRUCTIONS!  
OTHER CONSUMER SAFETY INFORMATION  
This appliance is for HOUSEHOLD USE ONLY.  
WARNING! Shock Hazard: This appliance has a polarized plug (one wide blade) that reduces the  
risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety  
purpose of the plug by modifying the plug in any way or using an adaptor. If the plug does not  
fit, reverse the plug. If it still does not fit, have an electrician replace the outlet.  
Use the iron on an ironing board. Ironing on any other surface may damage that surface.  
Do not iron or vertical steam clothes that are being worn.  
Do not use vertical steam in the direction of people or pets.  
2
 
PARTS  
1
2
3
4
10  
5
9
6
8
7
11  
13  
14  
15  
12  
1. Cord  
2. Blast of Steam/Spray  
Buttons (see inset)  
9. Power ON/Auto Shutoff  
Reset Button/Light  
10. Heel Rest  
3. Adjustable Steam  
Switch (see inset)  
4. Water Tank Opening  
5. Spray Nozzle  
11. Adjustable Steam Switch  
12. Blast of Steam Button  
13. Spray Button  
14. Retractable Cord  
(on select models)  
6. Water Window  
7. Temperature Control  
Dial  
15. Cord Release Button  
(on select models)  
8. Soleplate  
3
 
OPERATION  
Before first use  
• Steam vents (located on bottom of soleplate) should be cleaned before first use.  
• During the first use of the iron, it may appear to smoke. This will stop and does not  
indicate a defect or hazard.  
• To clean steam vents before first use, prepare iron for steam ironing. See “To steam  
iron” section. Then iron over an old cloth for a few minutes while letting the iron  
steam. Press the Blast of Steam button several times to clean the vents. Then follow  
the instructions in “Cleaning—How to clean.”  
• Many irons spit or sputter during the first few uses with tap water. This happens as the  
steam chamber becomes conditioned. This will stop after a few uses.  
To dry iron  
• Plug iron into outlet.  
• Turn Adjustable Steam Switch to Dry Iron O.  
• Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to  
reach desired temperature.  
• To turn iron OFF (O), turn Temperature Control Dial to OFF (O) and unplug iron.  
To steam iron  
• Unplug iron. Turn Adjustable Steam Switch to Dry Iron O. Set iron upright on  
heel rest.  
• Using a cup, slowly pour tap water into water tank opening until MAX fill line has  
been reached. Do not fill iron directly from the faucet.  
• Plug iron into outlet.  
• Turn the Temperature Control Dial to desired fabric setting in the steam range.  
• Allow two minutes for the iron to reach desired temperature.  
• Set Adjustable Steam Switch to the recommended steam level. See the “Fabric  
Setting Chart.”  
• To turn iron off, set Adjustable Steam Switch to Dry Iron O. Turn the Temperature  
Control Dial to OFF ( O ). Unplug iron.  
• Empty water from the iron following directions in “Cleaning—How to clean.”  
Water  
Please use ordinary tap water. If you have extremely hard water, alternate between  
tap water and distilled water for use in the iron.  
4
 
FABRIC SETTING CHART  
Steam  
Setting  
Ironing Instructions  
Temperature Setting  
Off  
Dry iron using spray if necessary.  
Dry iron on the wrong side of the fabric.  
Iron while fabric is still damp.  
Nylon, Acrylic  
Silk  
O
Polyester  
Wool  
••  
••  
Use a press cloth and steam iron on the  
wrong side of fabric.  
Rayon  
Iron using spray if necessary.  
•••  
•••  
Cotton,  
Linen  
For cotton, iron while still damp or use spray.  
For linen, iron fabric on wrong side.  
CLEANING  
Iron  
• The water tank of your iron should be emptied after each use. Turn Temperature  
Control Dial to OFF ( O ). Unplug the iron and hold over a sink. Slowly tilt pointed end  
of iron down over sink. Water will run out of water tank opening.  
• After iron has completely cooled, fully retract cord into iron or loop cord loosely  
around iron, as applicable, and store in an upright position. NOTICE: Do not store  
iron laying flat on soleplate.  
Soleplate  
• Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the  
soleplate.  
• To clean occasional buildup on the soleplate, wipe with a sudsy cloth. Do not use  
abrasive cleansers or metal scouring pads.  
• Always store iron upright in the heel rest position.  
How to clean  
To keep the steam vents clear of any buildup and to avoid damaging the soleplate, fol-  
low these instructions each time you iron using steam.  
• Turn Temperature Control Dial to OFF ( O ) and set Adjustable Steam Switch to Dry  
Iron O. Fill iron with water to 12 of its maximum capacity.  
• Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes. Keep  
Adjustable Steam Switch on Dry Iron O.  
• Turn Temperature Control Dial to OFF ( O ). Unplug iron and hold over a sink with  
soleplate facing down.  
• Turn Adjustable Steam Switch to MAX, while pressing Blast of Steam button often.  
Boiling water and steam will flow out of steam vents. Allow all water to drain from iron.  
• Gently tilt iron up and down to allow water to clean entire soleplate area.  
• If water still remains inside of soleplate, reheat iron as indicated in Step 2. Boiling  
water and steam could still flow out of steam vents.  
5
 
FEATURES (on select models)  
Adjustable Steam Switch  
This knob provides steam for fabrics such as wool and linen. See the “Fabric Setting  
Chart” for details. Set the switch to Dry Iron O to iron without steam.  
Spray and Blast of Steam Buttons  
Push Blast of Steam Button for an extra blast of steam. Push Spray Button to release a  
fine spray of water for difficult wrinkles in cotton or linen.  
Power ON/Auto Shutoff Reset Button/Light  
This light comes on when the iron is first plugged in. After one hour, the iron will shut  
off and the light will go out. Push the Reset Button/Light to turn  
the iron back on.  
Power ON Light  
On units not provided with Auto Shutoff, this light comes on when the iron is plugged  
in and remains on until the iron is unplugged. The light stays on even if Temperature  
Control Dial is turned to OFF ( O ).  
Retractable Cord  
• Pull cord to desired length. Do not unwind cord beyond colored tape indicator  
on cord.  
• To store cord, press and hold the Cord Release Button while guiding the cord into  
the storage area.  
w WARNING To reduce the risk of an eye injury, hold the  
plug while retracting the cord.  
6
 
TROUBLESHOOTING  
PROBLEM  
THINGS TO CHECK  
Iron won’t heat.  
• Is the iron plugged in and the outlet working?  
Check the outlet by plugging in a lamp.  
• Is the Temperature Control Dial turned to a fabric setting?  
• If auto shutoff model, is the Reset Button/Light illuminated?  
If not, push to reset.  
Water is leaking  
out of the iron.  
• Do not overfill the water tank.  
• If steam ironing, is Adjustable Steam Switch in a steam  
position and the Temperature Control Dial in the steam  
range? Did the iron have enough time to preheat?  
• If dry ironing, make sure the Adjustable Steam Switch is in  
the DRY IRON/O position.  
Iron won’t steam.  
• Check the water level. If water level is low, fill using a cup  
with tap water to MAX fill line.  
• Is the Adjustable Steam Switch in a steam position?  
• Has the iron had enough time to preheat?  
Iron leaves spots  
on clothing.  
• ALWAYS empty the water tank of the iron after using.  
Water left in the tank may discolor clothing and soleplate.  
Wrinkles not  
removed.  
• Check Temperature Control Dial is set to correct fabric.  
• Check Temperature Control Dial and set to lower setting.  
Allow iron to cool down 5 minutes before continuing.  
Fabric/clothing  
scorched.  
• If the cord should become twisted, first clear the steam  
vents and empty water from water tank. See “How to  
clean” section. Then turn iron to OFF (O), turn Temperature  
Control Dial to OFF (O), and unplug iron. Let cool. Make sure  
all water has been emptied from iron; then hold iron cord in  
the middle of entire length. Let plug and iron dangle freely  
until cord uncoils. This will extend the life of your iron cord.  
Twisted cord.  
Retractable cord  
will not unwind (on  
select models).  
• Rewind a small amount of cord then fully depress the Cord  
Release Button and pull the cord to desired length.  
7
 
CUSTOMER ASSISTANCE  
If you have a claim under this warranty, please call our Customer Assistance Number.  
For faster service, please have the model number and product name ready for the  
operator to assist you. This number can be found on the bottom of your appliance and  
on the front page of this manual.  
Model: __________________ Type: __________________ Series: ________________  
Customer Assistance Number 1.877.207.0923 (US) or 1.877.556.0973 (Canada)  
Keep these numbers for future reference!  
How does state law relate to this warranty?  
• This warranty gives you specific legal rights,  
and you may also have other rights which  
vary from state to state or province to  
province.  
Two-Year Limited Warranty  
What does your warranty cover?  
• Any defect in material or workmanship.  
For how long after the original purchase?  
• Two years.  
• THIS WARRANTY IS IN LIEU OF ANY OTHER  
WARRANTY OR CONDITION, WHETHER  
EXPRESS OR IMPLIED, WRITTEN OR ORAL,  
INCLUDING, WITHOUT LIMITATION, ANY  
STATUTORY WARRANTY OR CONDITION OF  
MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, EXCEPT TO THE  
EXTENT PROHIBITED BY LAW.  
• WAL-MART, GE, AND THE PRODUCT  
MANUFACTURER EXPRESSLY DISCLAIM ALL  
RESPONSIBILITY FOR SPECIAL, INCIDENTAL,  
AND CONSEQUENTIAL DAMAGES OR LOSSES  
CAUSED BY USE OF THIS APPLIANCE. ANY  
LIABILITY IS EXPRESSLY LIMITED TO AN  
AMOUNT EQUAL TO THE PURCHASE PRICE  
PAID WHETHER A CLAIM, HOWEVER  
INSTITUTED, IS BASED ON CONTRACT,  
INDEMNITY, WARRANTY, TORT (INCLUDING  
NEGLIGENCE), STRICT LIABILITY, OR OTHER-  
WISE. SOME STATES OR PROVINCES DO NOT  
ALLOW THIS EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL LOSSES SO  
THE FOREGOING DISCLAIMER MAY NOT  
APPLY TO YOU.  
What will we do?  
• Provide you with a new one.  
• For those items still under warranty but no  
longer available, WAL-MART reserves the  
right to replace with a similar GE branded  
product of equal or greater value.  
How do you make a warranty claim?  
• Save your receipt.  
• Properly pack your unit. We recommend  
using the original carton and packing  
materials.  
• Return the product to your nearest  
WAL-MART store or call Customer  
Assistance at 1-877-207-0923 (U.S.)  
or 1-877-556-0973 (Canada).  
What does your warranty not cover?  
• Parts subject to wear, including, without  
limitation, glass parts, glass containers,  
cutter/strainer, blades, seals, gaskets, clutches,  
motor brushes, and/or agitators.  
• Commercial use or any other use not found  
in printed directions.  
• Damage from misuse, abuse, or neglect,  
including failure to clean product regularly  
in accordance with manufacturer’s  
instructions.  
What if you encounter a problem with  
this product while using it outside the  
country of purchase?  
• The warranty is valid only in the country of  
purchase and you follow the warranty  
claim procedure as noted.  
is a trademark of General Electric  
Company and is used under the  
license by WAL-MART Stores, Inc.,  
Marketed in Canada by:  
Wal-Mart Canada Corp.  
1940 Argentia Road, Mississauga,  
Ontario L5N1P9  
Bentonville, AR 72716  
g
 

Exido Scale 246 026 User Manual
Extron electronic Car Stereo System AAP 103 AKM UK User Manual
Fisher Price Automobile Accessories G5911 User Manual
Fostex Musical Instrument VF160EX User Manual
Frigidaire Microwave Oven FGMC3065K W B User Manual
Fuego Model Vehicle T0375 User Manual
Gaggenau Electric Grill VR 230 User Manual
Gateway Speaker System TWG870 User Manual
GE Washer WWA8829R User Manual
Glen Dimplex Home Appliances Ltd Oven FS 60 DO DF User Manual