Graco Saw 246477 User Manual

Instructions - Parts  
Circulation and  
Return Tube Kits  
309852E  
ENG  
For recirculation of polyurethane materials from proportioner to 55 gal. (200  
liter) fluid supply drums.  
4000 psi (27.6 MPa, 276 bar) Maximum Fluid Working Pressure  
Description  
Carbon Steel  
Stainless Steel  
Return Tube Kit  
246477  
246978  
24E379  
24D106  
Circulation Kit  
Circulation Kit With Moisture-Lok Hose  
24D107  
Important Safety Instructions  
Read all warnings and instructions in this manual.  
Save these instructions.  
246978 Kit shown installed in Reactor proportioning  
system. Some parts shown are not included in kit.  
TI3465a  
 
Circulation Kit  
Circulation Kit  
1. Install two return tube  
kits, page 2  
2. Connect circulation kit  
Remove fittings from elbows (A, B) at the pro-  
portioner fluid manifold. Only used with 24697  
For 246978: Screw reducing nipples (104) into  
elbows. Connect one end of hoses (102) to  
each nipple.  
CAUTION  
To prevent cross-contamination of fluid, mark A com-  
ponent (ISO) connections with red tape. Mark B com-  
ponent (RES) connections with blue tape. Do not  
interchange or cross-connect A component and B  
component parts.  
For 24E379 and 24D107: Connect elbows (105)  
to the proportioner fluid manifold. Connect fitting  
(106) to return tube. Connect one end of hoses  
(102) to each elbow.  
E
Connect other end of A side hose (102) to  
elbow (E) of A component return tube kit.  
Repeat for B side hose.  
106  
102  
Ref.  
No.  
101  
Part No. Description  
KIT, return tube; see page 2  
Qty  
2
2
102 H45010 HOSE, fluid; nylon; 1/2 in. (13 mm)  
ID; 1/2 npsm(fbe); 10 ft (3.05 m)  
262176 HOSE, B; 1/4 in. (6.35 mm) ID; (10  
ft (3.05 m)  
2
2
TI15106a  
262239 HOSE, B; 1/4 in. (6.35 mm) ID; (10  
ft (3.05 m)  
104 162449 NIPPLE, reducing; 1/2 x 1/4 npt  
105 122311 FITTING, elbow; 9/16-18 JIC 06 x  
1/4 npt  
2
2
122786 FITTING, elbow; 9/16-18 JIC 06 x  
1/4 npt  
2
106 124151 FITTING, 9/16-18 JIC 06 x 1/2 npt  
124152 FITTING, 9/16-18 JIC 06 x 1/2 npt  
2
2
† 246978 Circulation Kit only.  
24E379 Circulation Kit only.  
24D107 Circulation Kit only.  
246978 Circulation Kit  
24E379 and 24D107 Circulation Kit  
A
105  
104  
102  
102  
B
104  
105  
102  
102  
TI15107a  
TI3510a  
309852E  
3
 
 
Graco Standard Warranty  
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in  
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty  
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by  
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written  
recommendations.  
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty  
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of  
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with  
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or  
maintenance of structures, accessories, equipment or materials not supplied by Graco.  
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of  
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned  
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will  
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.  
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy  
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or  
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.  
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT  
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to  
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these  
warranties.  
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or  
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the  
negligence of Graco, or otherwise.  
FOR GRACO CANADA CUSTOMERS  
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,  
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la  
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite  
de ou en rapport, directement ou indirectement, avec les procédures concernées.  
Graco Information  
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.  
Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505  
All written and visual data contained in this document reflects the latest product information available at the time of publication.  
Graco reserves the right to make changes at any time without notice.  
Original instructions. This manual contains English. MM 309852  
Graco Headquarters: Minneapolis  
International Offices: Belgium, China, Japan, Korea  
GRACO INC. P.O. BOX 1441 MIINNEAPOLIS, MN 55440-1441  
Copyright 2003, Graco Inc. is registered to ISO 9001  
Revised 04/2010  
 

Graco Crib PD147439C User Manual
Grizzly Grinder H8213 User Manual
Hamilton Beach Blender 840210002 ENv01indd 4 User Manual
Harbor Freight Tools Work Light 95388 User Manual
Hasbro Motorized Toy Car 23732 User Manual
HotBrick Network Router VPN 800 8 F User Manual
Hotpoint Washer 9774 User Manual
HP Hewlett Packard Graphics Tablet E1432A User Manual
Husky Nail Gun HDN16450AV User Manual
Hypertec Carrying Case 3102 User Manual