Grizzly Automobile Accessories G8731 User Manual

MODEL G8731/G8732/  
G8733  
TOW DRAW BAR  
INSTRUCTIONS  
hitch receiver shaft  
Ball hitch  
Mounting  
hole  
1. This tow draw bar was designed to  
mount into a 2" x 2" square hitch  
receiver. NEvER use this product for  
any purpose it was not designed for.  
2. Know your load and tongue weight!  
NEvER exceed the gross load towing  
capacity or the tongue weight capacity  
of the hitch receiver or draw bar.  
hitch pin hole  
tongue  
3. When mounting the draw bar, only use  
an approved hitch pin with a safety clip  
properly installed through the hitch  
receiver and draw bar.  
figure 1. Model g8731/g8732/g8733  
identification (shown in "lower" position).  
Specifications  
4. ALWAyS attach load-appropriate safe-  
ty chains to the load and through the  
hitch receiver chain loops.  
Maximum load towing Capacity ......... 5000 lbs.  
Maximum tongue Weight Capacity........ 500 lbs.  
required hitch receiver size ......square 2" x 2"  
required hitch pin ....58" diameter w/safety Clip  
distance Between Center of hitch receiver shaft  
& tongue:  
— Model g8731.........................................2"  
— Model g8732 ........................................4"  
— Model g8733 ........................................6"  
Ball hitch Mounting hole diameter .................. 1"  
hitch receiver Construction................. 316" steel  
5. ALWAyS thoroughly inspect each com-  
ponent of the towing assembly for  
damage or any unsafe condition before  
attaching a load. If you are in doubt  
about the safe operation of any of these  
towing devices, DO NOT use them.  
6. If you do not have experience towing  
loads with your vehicle, WE STRONGLy  
RECOMMEND that you read books or  
get professional help before towing  
any load. Grizzly will not be held liable  
for accidents caused by lack of training  
or failure to follow safe towing prac-  
tices.  
3
tongue Construction ............... Welded 4" steel  
Weight:  
— Model g8731....................................7 lbs.  
— Model g8732 ...................................9 lbs.  
— Model g8733 ..............................13.5 lbs.  
Copyright © oCtoBEr, 2008 By grizzly industrial, inC.  
WARNING: NO pORTION Of ThIS MANUAL MAy BE REpRODUCED IN ANy ShApE  
OR fORM WIThOUT ThE WRITTEN AppROvAL Of GRIzzLy INDUSTRIAL, INC.  
#ts11147 printEd in China  
 

Graco Crib ISPP008AB User Manual
Greenheck Fan Gas Heater DGX User Manual
Grizzly Automobile Parts G8720 User Manual
Grizzly Switch H8243 User Manual
Haier Freezer HUF138PA User Manual
Hamilton Beach Blender Immersion Mixer User Manual
HannsG Computer Monitor HQ171DP User Manual
HTC PDAs Smartphones TRIN100 User Manual
Husqvarna Spreader 966067001 User Manual
Hy Tek Manufacturing Flat Panel Television Tek Panel 570 User Manual