Grundig CRT Television MF 40 2501 5 TEXT User Manual

COLOR  
TELEVISION  
ELEGANCE 15 FLAT  
MF 40-2501/5 TEXT  
ENGLISH  
ΕΛΛΗΝΙΚΑ  
POLSKI  
MAGYAR  
HRVATSKI  
SLOVENSKO  
 
___________________________  
SET-UP AND SAFETY  
Please note the following information when setting up your television set.  
10  
cm  
10  
cm  
20 cm  
20  
cm  
This television set is designed to receive and display video and audio  
signals.  
Any other use is expressly prohibited.  
VOL/PR  
The ideal viewing distance is 5 times the screen diagonal.  
External light falling on the screen impairs picture quality.  
Ensure sufficient clearance between the TV and the wall cabinet.  
The television set is designed for use in dry rooms. If you do use it in the  
open, please ensure that it is protected from moisture, such as rain or  
splashing water. Do not expose the television set to any moisture.  
VOL/PR  
Do not place any vessels such as vases on the television, as they may  
spill liquid, thus presenting a safety risk.  
Place the television set on a solid, level surface. Do not place any  
objects such as newspapers on the television set or cloth or similar items  
beneath it.  
f
ol  
G
am  
g
/PR  
Do not place the television set close to heating units or in direct sunlight,  
as this will impair cooling.  
Heat build-up can be dangerous and shortens the operating life of the  
television set. For reasons of safety, have a specialist remove any dirt  
deposits in the set from time to time.  
Keep the television set away from magnetic fields (loudspeaker boxes,  
for example).  
VICE !  
! SER  
AV  
Do not open the television set under any circumstances. Warranty  
claims are excluded for damage resulting from improper handling.  
Ensure that the mains cable is not damaged.  
Thunderstorms are a danger to all electrical devices. Even if the tele-  
vision set is switched off, it can be damaged by a lightning strike to the  
mains or the antenna cable. Always disconnect the mains and antenna  
plugs during a storm.  
Clean the screen with a soft, damp cloth. Only use plain water.  
3
 
__________  
CONNECTION/PREPARATION  
Connecting the antenna and the mains cable  
1
3
TV  
R
AV  
2
1
2
Insert the telescopic antenna in the recess in the rear panel.  
Plug the antenna cable of the rooftop antenna into the »Ä«  
antenna socket on the television.  
3
Plug the mains cable into the wall socket.  
Inserting batteries in the remote control  
1
Open the battery compartment by removing the lid.  
2
Insert the batteries (Mignon type, for example UM-3 or  
AA, 2x1,5V).  
Observe the polarity (marked on the base of the battery  
compartment).  
3
Close the battery compartment.  
Note:  
If the television no longer reacts properly to remote  
control commands, the batteries may be flat. Be sure to  
remove used batteries.  
The manufacturer accepts no liability for damage re-  
sulting from used batteries.  
Environmental note  
Batteries, including those which contain no heavy metal,  
may not be disposed of with household waste. Please  
dispose of used batteries in an environmentally sound  
manner. Find out about the legal regulations which apply  
in your area.  
4
 
____________________________________________  
OVERVIEW  
The remote control  
Ǽ
Switches off the television set (stand-by).  
PIP  
E
-/--  
Key has no function.  
PIP  
Switches between picture formats.  
Switches between single and double-digit preset  
channels;  
switches to double character size in teletext mode.  
z
1...0  
Switches the television on from standby mode;  
selects channels directly.  
d
Sound on/off (mute).  
TXT  
AV  
POS  
d
SCAN  
PAP  
SIZE  
i
Opens and closes the info menu;  
closes all menus.  
VCR  
DVD  
Z
Zap function.  
SAT  
P+, P-  
Switches the television on from standby;  
selects stations step by step;  
moves the cursor in the menus up and down.  
Tele Pilot 160 C  
Ǹ Ƿ  
Adjusts the volume;  
moves the cursor left/right.  
OK  
Calls up the preset channels;  
activates various functions.  
TXT  
AV  
Switches between teletext and TV modes.  
Selects the AV channels and the most recently viewed  
television channel.  
SCAN  
PAP  
Reveal answer in teletext mode.  
Page stop in teletext mode.  
SIZE  
POS  
Selects the sub-pages in teletext mode.  
Updates a page in teletext mode.  
5
 
____________________________________________  
OVERVIEW  
z
Selects a page in teletext mode.  
Ȅ
Time on.  
selects a page in teletext mode.  
PIP  
Ƿ
Selects a page in teletext mode.  
Selects a page in teletext mode.  
F
VCR, SAT Switches to operating a GRUNDIG video  
z
DVD  
recorder, a GRUNDIG satellite receiver or  
a GRUNDIG DVD player.  
Keep the relevant buttons (»VCR«, »SAT«, »DVD«)  
pressed down. Then press the button you require.  
TXT  
AV  
POS  
d
Note:  
SCAN  
PAP  
SIZE  
The functions available to you depend on the model of  
the device you are using.  
Just try it out.  
VCR  
DVD  
SAT  
Tele Pilot 160 C  
The front of the television set  
Switches the television to standby  
mode and off again.  
Ȃ
Switches the television on from stand-  
by mode.  
z P  
Preset button for volume and channel  
selection.  
Channel select down.  
Lower volume.  
Channel select up.  
Raise volume.  
+
/P  
Sockets on the right  
y
Headphone jack (3.5 mm ø jack plug).  
o (yellow) Video signal input for camcorder.  
o (withe) Audio signal input (mono) for  
camcorder.  
6
 
______________________________________________  
SETTINGS  
Setting television channels automatically  
The television set is equipped with an automatic channel search  
system.  
You start the search and can then sort the television channels into  
your order of preference.  
100 preset positions are provided, to which you can assign televisi-  
on channels from the antenna or from the cable connection.  
You can also delete television channels from the channel list which  
were found more than once or which have poor reception.  
1
Switch on the television with »  
press »P+« on the remote control.  
Ȃ« on the television set, then  
– The »Language« menu appears when the television is first  
switched on.  
Language  
English  
Deutsch  
Francais  
Italiano  
Svenska  
Dansk  
Norsk  
Suomi  
Slovensko  
Polski  
Magyar  
Pycckꢄꢄ  
¹1ꢆꢆꢆ  
Romaneste  
Hirvatski  
âe‰tina  
Slovenãina  
G. Shqipe  
ꢀꢁꢂꢃapckꢄ  
Мaкедонски  
Srpski  
Hint:  
If the »Language« menu does not appear on the screen, then  
set it in accordance with the chapter on resetting all television  
channels on page 18.  
Español  
Portuguesa  
Eλλhnika  
Türkçe  
Dutch  
ļ
2
3
Select language with »P+«, »P-«, » « or » « and press  
»OK« to confirm.  
– The »Country Selection« menu appears.  
Ǹ
Ƿ
OK  
Select  
ĵ
İ
Ł
Exit  
i
Ļ
G
Back  
G
Country Selection  
Arabic  
Press »P+«, »P-«, » « or » « to select the country and  
Ǹ
Ƿ
Iran  
Ireland  
Italia  
Magyar  
Netherl.  
Norge  
Österreich  
Polska  
Portugal  
Romania  
Russia  
»OK« to confirm.  
Belgium  
Bulgaria  
âeska Rep.  
Danmark  
Deutschl.  
Eλλaδa  
España  
Franca  
Hrvatska  
Schweiz  
Slovenija  
Slovensko  
Suomi  
Note:  
If your country is not displayed, select ». . . . . . . «.  
Sverige  
Türkiye  
U. K.  
4
Press »OK« to start the search.  
Yugoslavia  
. . . . . . . .  
– The »Setup« menu appears and the search begins. The auto-  
matic search may last several minutes depending on the num-  
ber of television channels received.  
ļ
OK  
Select  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
Note:  
Setup  
Autoprogramm  
After the search you can press »TXT« to finish the setting. The  
TV channel is stored in a useful order  
02%  
or  
ļ
OK  
ĵ
İ
Ł
with »i« you can go to the »Program Table« menu, where the  
channels can be arranged as you want.  
Exit  
i
G
Ļ
Information on editing the »Program Table« can be found on  
the next page.  
7
 
______________________________________________  
SETTINGS  
Changing stored channels  
You can delete channels that have been stored more than once  
during the automatic search. You can also store channels in a diffe-  
rent preset position, change or enter the name of a channel as well  
as skip channels.  
Selecting the station list  
1
Press »i« to open the »Main Menu«.  
Main Menu  
Picture  
Program Table  
Setup  
Features  
– The »Main Menu« appears.  
2
Select »Program Table« with »P+« or »P-« and confirm with  
»OK«  
– The »Program Table« menu appears.  
ļ
OK  
Select  
ĵ
İ
Ł
Exit  
i
G
Ļ
Note:  
Further operation is explained in the following sections.  
Deleting channels  
1
In the »Program Table« menu, select the station to be deleted by  
Program Table  
01  
02  
03  
04  
05  
ARD  
ZDF  
RTL  
SAT1  
PRO 7  
06 BR 3  
07 VOX  
08 KABEL  
09 S RTL  
10 WDR  
11  
pressing »P+«, »P-«, » « or » «.  
Ǹ
Ƿ
12  
13  
14  
15  
Ƿ
2
Press » « (yellow) to delete the channel.  
Note:  
G
G
G
G
Skip  
ļ
To delete other stations, repeat steps 1 and 2.  
Move  
Delete  
Name  
Select  
Exit  
OK  
ĵ
İ
Ł
Ļ
i
G
Sorting television channels  
1
In the »Program Table« menu, select the channel to be moved  
Program Table  
01  
02  
03  
04  
05  
ARD  
ZDF  
RTL  
SAT1  
PRO 7  
06 BR 3  
07 VOX  
08 KABEL  
09 S RTL  
10 WDR  
11  
12  
13  
14  
15  
with »P+«, »P-«, » « or » «.  
Ǹ
Ƿ
2
3
Highlight the channel with »  
Ȅ« (green).  
Select a new channel position by pressing »P+«, »P-«, » « or  
Ǹ
G
G
G
G
Skip  
ļ
Move  
Delete  
Name  
»
« and then press »Ȅ« to confirm.  
Select  
Exit  
Ƿ
OK  
ĵ
İ
Ł
Ļ
i
G
– All of the channels that follow move up one position.  
Note:  
To sort the other television channels repeat steps 1 to 3.  
Entering the channel names  
(maximum of 5 characters)  
1
In the »Program Table« menu, select the desired channel with  
Program Table  
01  
02  
03  
04  
05  
ARD  
ZDF  
RTL  
SAT1  
PRO 7  
06 BR 3  
07 VOX  
08 KABEL  
09 S RTL  
10 WDR  
11  
12  
13  
14  
15  
»P+«, »P-«, » « or » «.  
Ǹ
Ƿ
F
2
3
Highlight the channel with » « (blue).  
Select letters or numbers with »P+« or »P-«, move to the next  
G
G
G
G
Skip  
ļ
Move  
Delete  
Name  
position with » « or » « and repeat.  
Select  
Exit  
Ǹ
Ƿ
OK  
ĵ
İ
Ł
Ļ
i
G
F
4
Store the channel name with » « (blue).  
Note:  
To enter additional channel names, repeat steps 1 to 4.  
8
 
______________________________________________  
SETTINGS  
Skipping television channels  
You can mark television channels which should be skipped during  
selection with »P+« or »P-«. A selection with the number keys is  
also possible.  
1
In the »Program Table« menu, select the desired channel with  
Program Table  
01  
02  
03  
04  
05  
ARD  
ZDF  
RTL  
SAT1  
PRO 7  
06 BR 3  
07 VOX  
08 KABEL  
09 S RTL  
10 WDR  
11  
12  
13  
14  
15  
»P+«, »P-«, » « or » «.  
Ǹ
Ƿ
z
2
Highlight the channel with »  
« (red).  
– The television channel is now displayed against a red back-  
G
G
G
G
ground.  
Skip  
ļ
Move  
Delete  
Name  
Select  
Exit  
OK  
ĵ
İ
Ł
You can deselect the selected channel by pressing the red  
button again.  
Ļ
i
G
Concluding the settings  
Press »i« to finish the settings.  
1
Picture settings  
1
2
3
4
Press »i« to open the »Main Menu«.  
– The »Main Menu« appears.  
Select »Picture« with »P+« or »P-« and confirm with »OK«.  
– The »Picture« menu appears.  
Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with  
»P+« or »P-« and adjust them with » « or » «.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Store  
Ǹ
Ƿ
Select »Store« with »P+« or »P-« and confirm the setting with  
»OK«.  
– The »Stored« message appears.  
ļ
OK  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
5
Press »i« to finish the settings.  
9
 
___________________  
TELEVISION OPERATION  
Basic functions  
Switching on and off  
1
Switch on the television by pressing the »  
vision set.  
Ȃ« button on the tele-  
– The device switches to standby mode.  
Switch the television on with »1…0« or »P+« or »P-«.  
PIP  
2
3
Press the »Ǽ« button to switch the television to standby mode.  
Press »1…0« or »P+« or »P-« to switch on the device from  
standby mode.  
Completely switch the television off by pressing »  
Ȃ« on the  
z
television set.  
– This saves electricity.  
Selecting channels  
TXT  
AV  
POS  
d
1
Use »1…0« to select channels directly.  
Preselect two digit channel positions with »–/«.  
SCAN  
PAP  
SIZE  
2
Press »P+« or »P-« to move up and down channels.  
VCR  
DVD  
SAT  
Selecting AV channel positions  
1
Use »AV« to select AV channels directly.  
Adjusting the volume  
Tele Pilot 160 C  
1
Adjust the volume with » « or » «.  
Ǹ
Ƿ
Muting  
1
Use » « to switch the sound off (mute) and to switch it on  
again.  
p
Displaying time  
1
You can display the time by pressing the »  
channels with teletext).  
Ȅ« button (only for  
10  
 
___________________  
TELEVISION OPERATION  
Changing the picture format  
The television automatically switches to the 16:9 format, if this  
format is recognised via the Euro-AV socket.  
1
Select the picture format with »  
format, for example »16:9«, appears on the screen.  
You can choose between the following picture formats:  
«. The selected picture  
E
»Auto« format  
The picture format is automatically switched to »16:9« for 16:9  
programmes.  
The picture format is automatically switched to »4:3« for 4:3  
programmes.  
»4:3« format  
For 4:3 programmes, select picture format »4:3«.  
»16:9« format  
For 16:9 programmes, select picture format »16:9«.  
Zap function  
This function allows you to save the television channel which you  
are currently watching and switch to other channels (zapping).  
1
Select the channel you want to save in the zap memory with  
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by  
pressing »Z«.  
>
– The display »z – P1 BBC1« appears in the screen.  
2
3
Change channels with »1…0« or »P+« »P-«.  
You can now use »Z« to switch between the saved channel (in  
the example, BBC1) and the channel you were watching before.  
4
Press »i« to quit the zap function.  
– The display disappears.  
11  
 
_______________________________  
TELETEXT MODE  
FLOF text and normal text mode  
Switching on teletext and selecting pages  
1
Press »TXT« to switch on teletext.  
2
Use »0...9« to enter the page number directly or »P+« and  
»P-« to switch up and down pages (to return to page 100,  
press »i«).  
PIP  
Note:  
At the bottom of the screen, you will see an information line  
consisting of a red, green, yellow and blue text field. Your  
remote control has buttons with the corresponding colours.  
z
F
z
3
4
Press »  
« (red), »  
Ȅ
« (green), »II« (yellow) or » « (blue) to  
select a teletext page. This depends on the options in the infor-  
mation line.  
TXT  
AV  
POS  
d
Press »TXT« to switch off teletext.  
SCAN  
PAP  
SIZE  
Additional functions  
Waiting  
VCR  
DVD  
SAT  
While a page is being searched for, you can switch to the television  
channel.  
Tele Pilot 160 C  
1
Enter the number of the teletext page with »1…0« and then  
press »POS«.  
– As soon as the page is found, the teletext page number  
appears in the top left hand corner of the screen.  
2
Switch to the teletext page by pressing »POS«.  
Increasing character size  
If you have difficulty reading the text on the screen, you can double  
the character size.  
1
To enlarge the character size of a teletext page, press »–/«  
repeatedly.  
Page stop  
A multiple page may contain several sub-pages, which are automa-  
tically scrolled by the transmitting station.  
1
2
Stop the sub-pages with »PAP«.  
Press »PAP« to quit the function.  
12  
 
_______________________________  
TELETEXT MODE  
Calling up a sub-page directly  
If the selected teletext page contains additional pages, the number  
of the current sub-page as well as the total number of pages is  
displayed.  
1
2
Call up the sub-pages with »SIZE«.  
Enter the four-digit number for the sub-page with »1…0«.  
– The selected sub-page is displayed after a short delay.  
Reveal answer  
Certain teletext pages contain ”hidden answers” or information  
which can be called up.  
1
2
Display information with »SCAN«.  
Conceal information with »SCAN«.  
13  
 
______________  
CONVENIENCE FUNCTIONS  
Entering the switch-off time  
You can enter a switch-off time. After this time has elapsed, the tele-  
vision switches to standby mode.  
1
Press »i« to open the »Main Menu«.  
– The »Main Menu« appears.  
Features  
Sleep Timer  
AVL  
00:12  
On  
Language  
2
3
4
Select »Features« with »P+« or »P-« and confirm with »OK«.  
Select »Sleep Timer« with »P+« or »P-«.  
ļ
OK  
ĵ
İ
Ł
Enter the required time (in 15 minute intervals from 15 to  
120 minutes) by pressing » « or » «.  
Exit  
i
G
Ļ
G
Back  
Ǹ
Ƿ
5
Press »i« to finish the setting.  
Note:  
To delete the switch-off time, select »Sleep Timer« again and  
press » « or » « to select »Off«.  
Ǹ
Ƿ
Automatic volume  
Television stations broadcast at different volumes. The automatic  
volume limiting (AVL) function means the volume is kept the same  
when you switch between channels.  
1
Press »i« to open the »Main Menu«.  
– The »Main Menu« appears.  
Features  
Sleep Timer  
AVL  
00:12  
On  
Language  
2
3
Select »Features« with »P+« or »P-« and confirm with »OK«.  
Select »AVL« with »P+« or »P-« and then select »On« with  
ļ
»
« or » «.  
Ǹ
Ƿ
OK  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
4
Press »i« to finish the setting.  
Changing the menu language  
1
Press »i« to open the info menu.  
– The info menu appears.  
Features  
Sleep Timer  
AVL  
00:12  
On  
Language  
2
3
Select »Features« with »P+« or »P-« and confirm with »OK«.  
Select »Language« with »P+« or »P-« and confirm with  
»OK«.  
– The »Language« menu appears.  
ļ
OK  
Select  
G
ĵ
İ
Ł
Exit  
i
G
Ļ
Back  
4
5
Select the language with »P+«, »P-« and press »OK« to con-  
firm.  
Press »i« to finish the setting.  
14  
 
______________  
CONVENIENCE FUNCTIONS  
Parental lock  
You can block any station. The screen goes black.  
1
Press »i« to open the info menu.  
Setup  
System  
– The info menu appears.  
BG  
C 34  
0
Channel  
Fine Tune  
Search  
Autoprogram  
Child Lock  
Program No  
Store  
2
3
4
Select »Search« by pressing »P+« or »P-«.  
Select »Child Lock« with »P+« or »P-«.  
ĵ Ł  
On  
P1  
Press » « or » « to activate or deactivate the parental lock  
Ǹ
Ƿ
ļ
(On) or (Off).  
Press »i« to finish the setting.  
OK  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
5
15  
 
_______________  
USING EXTERNAL DEVICES  
Decoder or satellite receiver  
Connecting a decoder or satellite receiver  
AV  
Decoder  
PAY-TV  
1
Connect the »AV1« socket on the television set and the appro-  
priate socket on the decoder using a EURO-AV cable.  
Notes:  
A satellite receiver can also be connected to this socket.  
If you want to use both a satellite receiver and a decoder, the  
decoder must be connected to the satellite receiver.  
Using a decoder  
1
Switch on the television and the decoder.  
2
Select the »AV1« channel by pressing »AV«.  
Using an S-Video device  
If you have a device with an S-Video output (such as a DVD player),  
you can connect it using a EURO/AV (Scart) cable to the »AV1«  
socket.  
Press »AV« to select the »AV1-S« channel.  
Camcorder  
Connecting the camcorder  
1
Connect the yellow socket (VIDEO – picture signal) on the tele-  
vision and the corresponding socket on the camcorder (VHS,  
Video 8) with a cinch cable.  
2
Connect the white socket (AUDIO – mono signal) on the tele-  
vision and the corresponding socket of the camcorder using a  
cinch cable.  
Operating with a camcorder  
1
Switch on the camcorder, insert a cassette and start playback.  
2
Select the »AV2« channel with »AV«.  
Connecting headphones  
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-  
phone socket on the television.  
 
16  
______________________________  
SPECIAL SETTINGS  
Setting television channels  
This setting is only necessary if a new channel comes on air and you  
do not want to change the order of your channels. The television  
channel can be set directly or using the search.  
Setting channels using the search  
1
Press »i« to open the »Main Menu«.  
2
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
Setup  
System  
3
4
Select »Program No« with »P+« or »P-« and set the preset  
BG  
C 34  
0
channel with » « or » «.  
Ǹ
Ƿ
Channel  
Fine Tune  
Search  
Autoprogram  
Child Lock  
Program No  
Store  
ĵ Ł  
Select »Search« with »P+« or »P-« and start the search with  
« or » «.  
»
Ǹ
Ƿ
On  
P1  
– If a strong station signal is received, the search is interrupted  
and the picture appears. Repeat the search until the channel  
you want appears on the screen.  
ļ
OK  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
Note:  
The current system is displayed in the »System« line.  
If the colour or sound are incorrect, select »System« with »P+«  
or »P-«. Make the necessary adjustments with » « or » «.  
Setup  
System  
Channel  
Fine Tune  
Search  
Autoprogram  
Child Lock  
Program No  
Store  
BG  
C 34  
0
Ǹ
Ƿ
5
6
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
ĵ Ł  
On  
P1  
Note:  
To set other television stations, repeat steps 3 to 5.  
ļ
OK  
Store  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
Press »i« to finish the setting.  
Fine tuning television channels  
The television automatically tunes itself to the best possible recepti-  
on. You may need to carry out manual fine tuning in areas where  
there is poor reception.  
Setup  
1
2
Press »i« to open the »Main Menu«.  
System  
Channel  
Fine Tune  
Search  
Autoprogram  
Child Lock  
Program No  
Store  
BG  
C 34  
0
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
ĵ Ł  
On  
P1  
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »  
«
Ǹ
or » «.  
Ƿ
ļ
OK  
ĵ
İ
Ł
Select »Store« with »P+« or »P-« and confirm with »OK«.  
Exit  
i
G
Ļ
G
Back  
– The »Stored« message appears.  
Press »i« to finish the setting.  
17  
 
______________________________  
SPECIAL SETTINGS  
Setting the television channels by entering the  
channel numbers  
Main Menu  
Picture  
Program Table  
Setup  
1
2
Press »i« to call up the »Main Menu«.  
Features  
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
ļ
OK  
Select  
ĵ
İ
Ł
3
Select »Program No« with »P+« or »P-« and set the  
Exit  
i
G
Ļ
channel with » « or » «.  
Ǹ
Ƿ
Setup  
System  
Channel  
Fine Tune  
Search  
Autoprogram  
Child Lock  
Program No  
Store  
4
5
Select »Channel« with »P+« or »P-« and confirm with »OK«.  
BG  
C 34  
0
Press »OK« to choose between »S« (special channel) and »C«  
(channel).  
ĵ Ł  
On  
P1  
6
Press » « or » « to switch up and down channels or use  
Ǹ
Ƿ
»1…0« to enter the channel number directly.  
ļ
0
C/S  
9
G
G
OK  
ĵ
İ
Ł
Note:  
Exit  
Ļ
i
G
G
Back  
The current system is displayed in the »System« line.  
If the colour or sound are incorrect, select »System« with »P+«  
or »P-«. Make the necessary adjustments with » « or » «.  
Setup  
Ǹ
Ƿ
System  
Channel  
Fine Tune  
Search  
Autoprogram  
Child Lock  
Program No  
Store  
BG  
C 34  
0
7
8
Select »Store« with »P+« or »P-« and confirm with »OK«.  
ĵ Ł  
Note:  
On  
P1  
To set other television stations, repeat steps 3 to 7.  
ļ
Press »i« to finish the setting.  
OK  
Store  
ĵ
İ
Ł
Exit  
i
G
Ļ
G
Back  
Re-tuning all television channels  
You can re-tune all the television stations, for example if you move  
to another town.  
1
2
Press »i« to open the »Main Menu«.  
Setup  
System  
Channel  
Fine Tune  
Search  
BG  
C 34  
0
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
ĵ Ł  
Autoprogram  
Child Lock  
Program No  
Store  
3
4
Select »Program No« with »P+« or »P-« and using » « or  
Ǹ
On  
P1  
»
« enter the channel numbers from the point they should be  
Ƿ
saved.  
ļ
0
9
G
G
OK  
ĵ
İ
Ł
Select »Autoprogram« with »P+« or »P-« and confirm with  
»OK«.  
Exit  
Ļ
i
G
G
Back  
– The »Autoprogram« menu appears.  
5
6
Select the country using »P+«, »P-«, » « or » « and confirm  
with »OK«.  
Ǹ
Ƿ
Press »OK« to start the search.  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
Note:  
You can interrupt the search by pressing »i«.  
18  
 
_____________________________________  
INFORMATION  
Technical data  
Mains voltage:  
230 V, 50/60 Hz  
Power consumption: In standby mode 4 W  
Switched on 45 W  
Sound output:  
5 Watts music  
Reception ranges:  
C01 ... C99, special channels S01 ... S41,  
frequency band 1 ... 4  
Channel positions: 100 und 2 AV  
Service information for dealers:  
The product complies with the following EU directives:  
73/23/EEC directive for electrical equipment to be used within  
defined voltage ranges. 89/336/EEC directive on electromagnetic  
compatibility.  
The television set complies with the following standards: EN 60065,  
EN 55013, EN 55020  
19  
 
_____________________________________  
INFORMATION  
Troubleshooting  
If the remedies given below do not work, please consult an authori-  
sed GRUNDIG dealer. Please bear in mind that malfunctions can  
also be caused by external devices such as video recorders or satel-  
lite receivers.  
Fault  
Possible cause  
Remedy  
Screen lit (snow), but no  
station  
Antenna cable  
Is the antenna cable  
connected?  
No television station pro-  
grammed  
Start the station search  
Poor picture contrast  
Picture settings incorrectly Adjust the brightness,  
set  
contrast or colour setting  
Problem at station  
Test with another channel  
Interference to picture  
and/or sound  
Interference from other  
devices  
Change the position of the  
device  
Ghosts, reflection  
Channel setting  
Automatic or manual chan-  
nel setting/fine tuning  
Antenna  
Have antenna cable or  
system checked  
No colour  
Colour intensity at minimum Turn up the colour  
TV standard setting (if Select the correct colour  
setting option is available) standard  
Problem at station  
Test with another channel  
Inappropriate colour,  
colour spots  
Strong magnetic field due, Move the loudspeakers  
for example, to loudspea- away from the television.  
kers  
If colour spots remain,  
switch off the television set  
at the mains and switch on  
again after 10 minutes  
Volume set to minimum  
Turn up or switch on the  
volume  
Picture but no sound  
Problem at station  
Test with another channel  
Test another channel for  
Television station (has no  
teletext) or antenna system fine tuning and ghosts  
Teletext missing or faulty  
Station signal too weak  
No optical connection  
Check the antenna system  
Point the remote control at  
the television set  
Remote control does not  
work  
Remote control batteries  
Check the batteries, change  
if necessary  
Operating condition unde- Switch off the television  
fined  
with the main power button  
for approximately  
2 minutes  
Parental lock has been  
activated  
Switch off the parental lock  
The picture is unrecognisa-  
ble after switching on the  
television  
20  
 
_____________________________________  
INFORMATION  
Additional Information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
21  
 

Grizzly Staple Gun H8236 User Manual
Grizzly Work Light G8586 User Manual
Hasbro Games 09015 User Manual
Honeywell Humidifier HUL 535W User Manual
Hoshizaki Clock Radio CF2A FS User Manual
Hotpoint Clothes Dryer TCAM 80C Aquarius TCEM 80C Experience TCYM 80C Style User Manual
Hotpoint Clothes Dryer TVFG 65 User Manual
Hotpoint Washer Wml 721 User Manual
Hunter Fan Outdoor Ceiling Fan MD506 01 User Manual
Icom Two Way Radio IC F3021S User Manual