Table of Contents
Characteristic Functions
1
2
Important Safety Instructions
Technical Specifications
The Technical Specifications for Final Product
Technical Specifications for TV
VGA Display Mode
5
5
6
6
6
6
Power Management
Packing Listing
Installation & Connection
Antenna Connection
7
7
Power Connection
8
Computer Connection
8
HDMI digital port Connection
AV1 Video Signal Connection
AV2 Video Signal Connection
YPbPr/YCbCr Input Connection
8
9
10
11
Position of Control Keys
Remote Control
12
13
Basic Operation Instruction
15
15
15
15
15
16
17
18
18
19
Power On
Standby
Signal Source Selection
Menu Operation Instruction
PICTURE
SOUND
OSD
ADVANCE
TV
Simple Troubleshooting
22
Important Safety Instructions
Thank you to choose the LCD TV made by our company, a valuable product with
excellent quality and multiple functions. This machine will bring you more
audiovisual enjoyment. Its design can insure user s safety. All machine are strictly
tested before leaving factory. But incorrect use can lead to electric shock or fire. In
order to insure safety and extend its life, please read below regulations carefully
before using it and comply with the following safety instructions.
When the following troubles occur, please pull out the plug and call the
professional engineers to repair.
A. The cable or plug is damaged.
B. The product was fallen down or the case is
damaged.
C. Obvious abnormal situation occurs. In spite
of correct operation according to the user
manual but it still can't work normally.
D. Some abnormal substances or liquid fall into it.
E. Unusual sound or smell sends out.
There is high voltage inside the machine but no parts which can be repaired by
users themselves. In order to assure the people's safety, please do not open
the case to repair it by yourself. If it is needed to repair, please contact qualified
engineer to repair.
Please put this machine in the place of well
ventilation, instead of extremely hot, cool or
moist, and direct sunlight.
The slots on the case is designed to release
heat so as to assure that all inside components
will not reach an extra high temperature and
can work normally for a long time. Please do
not cover the holes while place it.
Unless there is good ventilation installation,
please do not put this machine in inlaid device.
Please do not place it on an unstable position
so as to avoid falling off.
Do not place the LCD TV near water source,
like a bathtub, pool, washing machine, or moist
2
Important Safety Instructions
cellar and similar environment.
During a thunder rain weather, do not touch
the power cord and antenna cable. Please
pull out the power line and aerial plugs for
preventing thunder and lightning damage to
this machine.
All cables can be connected or pull out only after power supply is turned off.
The power cord must be taken off before you
clean the machine. Do not use the liquid
cleanser or aerosol cleanser. It is
recommended to use a wet soft cloth to clean
the machine. Do not use the alcohol,
impregnant or ammoniac liquid to wipe the
screen.
If you will not use the machine for a long time, please pull out the power cord.
Do not keep the sleeping mode for too long time.
Read the manual and marking label before using the machine, and keep the
user manual for later use.
Don't use the attachments which are not recommended by the machine
manufacturer as they may cause hazards.
The power cord must be placed correctly so as to avoid be trample or crush.
Please do not make the power socket overloaded or the power cord extended.
Otherwise it will cause fire or electrical shock.
The LCD panel is fragile and expensive. The surface of the panel is easy to be
scratched. Please do not use the hard thing to knock, press, score the panel.
Otherwise it will be harmful for the panel. The exchange cost is very high.
All technical specification on this instruction book and outer package are
subject to change without notice. If the instruction book has slight difference
with actual operation, please take the actual operation as standard.
3
Important Safety Instructions
When the MAINS plug or an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
The machine should not suffer from waterdrop
or watersplash, do not place the vessel with
water (or other liquids) on it, for like this it is
possibly to cause fire or electric shock.
The attaching plug should be inserted into the
power point completely, otherwise it may cause
spark to bring fire.
Please do not put candle, ash-tray, incense, inflammables or explosive nearby
this machine.
Please do not stretch into any sharp object, metal or liquid, or touch the signal
attachment or the inner of radiation hole, in order to avoid short circuit and
product damage, or possibly causing electric shock. Especially pay attention
when there are children on the spot.
Please do not use the machine immediately when moving the machine from low
temperature place to high temperature one, or install and use at the place of
facing air conditioning, otherwise it may cause the condensation in the
machine, to cause fault.
Must be careful when moving this machine, avoiding being struck, especially
pay attention to protect the screen part. In addition, if using handcart, must
note the injury as the product is overturned from the handcart because of hard
braking, overexerting and uneven ground.
4
Technical Specifications
The Technical Specifications for Final Product
Panel size
26
32
Max. Resolution
Best Resolution
Pixel Pitch
1366 768
1366 768
1360 768@60Hz
0.4215mm 0.4215mm
1360 768@60Hz
0.51075mm 0.51075mm
Active Area
575.770mm 323.710mm 697.6845mm 392.256mm
Color
16.7M
16.7M
Panel Surface Disposal
Power Supply
Anti Glare
Anti Glare
100V-240VAC 60/50Hz
10W+10W
100V-240VAC 60/50Hz
10W+10W
Power Consumption of Speaker
Control Area of Remote Control
Operating Environment
Temperature
8M 300
8M 300
50C ~ 400C
10%~85%
50C ~ 400C
10%~85%
Humidity
Atmosphere Pressure
Storage Environment:
Temperature
86kpa-104kpa
86kpa-104kpa
-200C ~550C
5%~95%
-200C ~550C
5%~95%
Humidity
Atmosphere Pressure
Dimension (L H W)
Unpacking: Excluding base
Including base
86kpa-104kpa
86kpa-104kpa
652 449 104mm
652 498 104mm
770 570 200mm
786 531 110mm
786 577 110mm
900 660 220mm
Packing
Weight
10.5Kg
12.5Kg
12.5Kg
16.0Kg
Net Weight
Gross Weight
5
Technical Specifications
Technical Specifications for TV
1.Supported Systems PAL+SECAM or PAL+NTSC
2.Storage channels: 199
3.TV(RF): 75 Imbalance
4.AV Video-Input: 75 ,1VP-P, RCA
5.AV Audio-Input: 20K , 500mV RMS
6.YPbPr/HDMI Video Input: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
VGA Display Mode
No.
Mode
Resolution
720X400
640X480
800X600
1024X768
1360X768
Refresh
70Hz
1
VGA
60Hz
2
3
4
SVGA
XGA
60Hz
60Hz
WXGA
60Hz
Note: Recommended mode:1360X768@60Hz
Power Management
This product is complied with EPA Energy Star Standard and compatible with VESA
DPMS Standard. Details are listed as follows:
Mode
On
LED Indicator
Off
Power Consumption
140W (26")
170W (32")
1.5W
Standby
Lighting
Note: All the specifications in the user manual or on the packing carton may be
changed without additional notice.
Packing Listing
1. LCD TV (Excluding base subassembly)
2. User Manual
3. Power Cable (or the machine itself has power cable)
4. Remote Control
6
Installation & Connection
Antenna Connection
It is better to use outdoor antenna or CATV cable if you want to watch the colorful and
hi-definition pictures.
Attention:
Please turn off TV power before the outdoor antenna is connected to the TV signal
input port. Outdoor antenna can't be located near the high voltage cables. Please pull
out the plug of outdoor antenna to avoid thunder shock in thunder weather.
7
Installation & Connection
Power Connection
Notes:
1.This machine uses AC 100-240V, 60/50Hz.
2.If a long time at leisure, please disconnect
it from power supply.
Computer Connection
Please connect one end of VGA cord with the output port of the computer (available
for both desktop or laptop computer),
and another end of VGA cord with the
input port of the VGA on its rear cover.
HDMI digital port Connection
Connect external HDMI high signal
source to HDMI digital input port of this
machine through HDMI digital connector
cable; push"SOURCE" button to select
"HDMI" signal source.
Audio/Video machine with HDMIinterfaces
8
Installation & Connection
AV1 Video Signal Connection
Through composite cable, connect AV equipment VIDEO output termination to this
machine VIDEO input, and AV equipment AUDIO output termination to this machine
AUDIO input, respectively.
W
W
R
R
Y
Y
Yellow (VIDEO)
White (AUDIO-L)
Red (AUDIO-R)
W
R
CVBS, DVD Playeror other machine
with CVBS/S-Video.
9
Installation & Connection
AV2 Video Signal Connection
For easy connection to AV Video Signal, there are a group of AV Video Signal input
ports on the down part on the left side of the machine. The connection method is the
same as AV1.
Y
Yellow (VIDEO)
White (AUDIO-L)
Red (AUDIO-R)
W
R
S-VIDEO-2
AUDIO-R
R
W
AUDIO-L
VIDEO-2
Y
CVBS, DVD Playeror other machine
with CVBS/S-Video.
Earphone Socket: The TV speakers will be shut off when earphone is inserted
into this socket.
10
Installation & Connection
YPbPr/YCbCr Input Connection
If the signal source is DVD, Digital wired receiver or equipments with the
YPbPr/YCbCr output, recommends you to connect YPbPr or YCbCr output with the
TV YPbPr/YCbCr input. In order to obtains the better picture quality, at the same
time, please connect its audio output with TV audio input as shown in the following
chart. If you choose the YPbPr/YCbCr signal, please set signal source selection
under YPbPr pattern.
AV machine
CVBS, DVD Player or
other machine with
YPbPr/YCbCr.
G
B
Green (Y)
Blue (Pb/Cb)
W
R
Y
White(AUDIO-L )
Red (AUDIO-R, Pr/Cr)
Yellow (VIDEO)
W
W
G
B
R
R
R
Y
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Position of Control Keys
Front Panel Control Keys
SOURCE
CH+
3
5
CH-
VOL+
VOL-
6
4
MENU
7
1
2
1) Power Indicator
2) Remote Receiving Sensor
3) SOURCE: Press this key to enter the menu of signal source and choose signal
source.
4) MENU: Press this key to enter main menu
5) CH+/CH-: Press these two keys to select the channel, and adjust the options
you need under OSD operation.
6) VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the
analog value under OSD operation.
7)
Power On/Off
Note: There are some apparent differences between modes, please according to
practicality.
12
Remote Control
POWER
MUTE
Power
Mute
Numerical key
F1
Program list
Freeze picture
SMART
S
SMART
P
Smart sound
Smart image
OK
OK
Cursor Key
Menu
MENU
Channel
Source
Volume
VOL
CH
SOURCE
INFO
16:9
Info
Zoom
Return
Time
COLOR
P/N
AUDIO
Color
Color system
Telecontrol battery installation method
Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform
with the polarity of remote control battery box.
Note: Appearance of the remote control may be different from this picture, please
according to practicality.
13
Remote Control
Remote Control Key Instruction
Key
Function
POWER Turn on or standby
MUTE Eliminate sound
Numerical key Number input button
F1
Program list
MENU
Freeze picture
Look through or edit Program list
Press this button to display menu
SMART S
SMART P
SOURCE
Cursor key
Intelligent sound mode selection: STANDARD, NEWS, MUSIC, PERSONAL
Intelligent image mode selection: STANDARD, DYNAMIC, SOFT, PERSONAL
Press this button to display signal source selection menu
Up or Down cursor button: function select
Left or right cursor button: analog add or reduce
Sound volume add or reduce button
VOL+/VOL-
CH+/CH-
INFO
Select channel Number
System information display switch
Time
Timer setting button, press this key can set time of turning down.
15
OFF
30
45 60
120
Return
16:9
Color
P/N
AUDIO
OK
Press this button to return to last watching channel
"FULL", "MOVIE", "CAPTION", "4:3", "PANORAMA"
Color temperature mode selection button: Normal, Warm, Cool
Color system mode selection button: PAL, NTSC(SECAM), Auto
Optional
Confirm operation
Precautions for use of remote control:
1. When using remote control you should point it to the remote-control inductive
window. The goods between remote control and inductive window may hinder
normal operation.
2. Do not cause the remote control to receive fierce vibration. In addition, do not
set or place the remote control under direct sunlight, for the thermal energy will
cause the distortion of remote control.
3. When remote-control inductive window of main machine is under direct sunlight
or intense illumination, the remote control may malfunction, by now, please
change the angle of illumination or this machine, or approach the inductive
window to operate the remote control.
4. When the battery voltage is insufficiency it influences the remote control
distance, you should replace with new battery; when not to use the remote
control for long or the battery is exhausted, please take out the battery, in order
to avoid bringing the battery leakage to corrode the remote control and thus
cause it out of commission.
5. Do not use different batteries. The mix use of new and old batteries is not
allowed, you should use battery pair.
6. Do not throw battery into fire, charge or disassembly, especially do not charge,
assemble and disassemble, heat or burn to the used battery. Please observe the
related environmental protection stipulation on wasted battery.
14
Basic Operation Instruction
Power On
Plug power cord into the electrical socket and press '' '' key on the front panel, then
press ''Power'' key on the remote control to turn on the TV.
Standby
Press ''Power''key on the remote control. TV will be in standby.
Special Attention:
1.TV set will automatically turn to standby if there is no signal input for 5 minutes
when TV turns on.
2.TV set will automatically turn to standby when the preset time of turning off
reaches.
Signal Source Selection
Press ''SOURCE'' key either on the remote control or on the
T V
AV 1
AV 2
S - V I D E O 1
S - V I D E O 2
Y P B P R
H D M I 1
H D M I 2
P C
front panel. ''MENU OF SIGNAL SOURCE'' will be displayed
on the screen. Then press ''Up/Down'' key on remote control
or "CH+/CH-" key on the front panel to choose the signal
source such as TV, AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR,
HDMI1, HDMI2, PC, USB. Press ''OK'' key on the remote
control or ''MENU" key on the front panel and TV will switch
the current signal source to the signal source you choose.
U S B
Menu Operation Instruction
Press ''MENU'' key on the remote control or on the front panel. The TV will display the
main menu.
1. Press ''Left/Right'' key on the remote
control or ''VOL+/VOL-''key on the front
P I C T U R E
panel to select the adjustment sort menu,
C O N T R A S T
B R I G H T N E S S
H U E
S A T U R AT I O N
S H A R P N E S S
P I C T U R E M O D E
S C A L E
5 0
5 0
5 0
5 0
5 0
which includes 5 sorts: PICTURE, SOUND,
OSD, ADVANCE, TV.
2. Press ''Down''key on the remote control
or ''CH-'' on the front panel to enter the
adjustment sort menu.
STANDARD
FULL
NORMAL
MIDDLE
C O L O R T O N E
3 D N R
S E L
A D J
M E N U E X I T
3. Press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select what is needed to adjust in sort menu.
4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-''on the front panel to
adjust the value or setting.
5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu;
Press ''Menu'' key to return to previous menu when the TV displays the submenu;
15
Basic Operation Instruction
Press ''Source''key to display the signal source menu or exit signal source menu.
6. During the operation, the selections which can not be adjusted at current mode will
be hidden automatically and the color of the selections will be changed into gray.
7. Menu Operation Instruction in this manual is explained according to TV mode. The
operations in other modes are similar to the one in TV mode. Users can take it as
reference.
PICTURE
Select
to enter the PICTURE submenu.
Press "Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
P I C T U R E
C O N T R A S T
B R I G H T N E S S
H U E
S A T U R AT I O N
S H A R P N E S S
5 0
5 0
5 0
5 0
5 0
P I C T U R E M O D E
S C A L E
STANDARD
FULL
C O L O R T O N E
3 D N R
NORMAL
MIDDLE
Special Attention
1. The Hue function is available only for
NTSC system.
S E L
A D J
M E N U E X I T
2. The value adjusted by user, such as Contrast, Brightness, Saturation, Hue, and
Sharpness will be saved automatically by the machine as personal mode.
Remote Control Shortcut Keys
SMART P: Press SMART P key on the remote control. You can switch the function
among the "STANDARD", "DYNAMIC", "SOFT", "PERSONAL" four modes .
16:9: Press 16:9 key on the remote control, you can switch the mode among the
"FULL", "MOVIE", "CAPTION", "4:3", "PANORAMA" five modes.
Option
Description
Function
Adjust the contrast of whole
picture
Increasing analog value increases Contrast;
CONTRAST
Decreasing analog value decreases Contrast(0-100).
Adjust brightness and blackness Increasing analog value increases brightness;
BRIGHTNESS
HUE
of whole picture
Decreasing analog value decreases brightness(0-100).
Increasing analog value increases green;
Adjust the hue of whole picture
Decreasing analog value increases purple(0-100).
Increasing analog value increases color;
Adjust the saturation of whole
picture
SATURATION
SHARPNESS
Decreasing analog value decreases color (0-100).
Increasing analog value increases definition;
Decreasing analog value decreases definition (0-100).
Adjust the sharpness of whole
picture
PICTURE MODE Select picture mode
"STANDARD", "DYNAMIC", "SOFT", "PERSONAL" four modes.
"FULL", "MOVIE", "CAPTION", "4:3", "PANORAMA",
Select picture scale
SCALE
Select color temperature mode
There are three Color Temperature modes,
"NORMAL", "WARM", "COOL ".
COLOR TONE
3D NR
of the picture
Select model of3D NR
"MIDDLE", "STRONG", "WEAK", "OFF".
16
Basic Operation Instruction
SOUND
Select
to enter the SOUND submenu.
Press " Up/Down " key on the remote
control or the key "CH+/CH-" on the front
panel to choose what you need. Press the
"Left / Right" key on the remote control or
the "VOL+/VOL-" key on the front panel to
adjust analog value or state (see below
table).
SOUND
B A S S
T R E B L E
B A L A N C E
S O U N D M O D E
5 0
5 0
5 0
STANDARD
S E L
A D J
M E N U E X I T
Special Attention
1. Normally, 50 value of adjustment is
recommended;
2. The treble or bass analog value which is adjusted by the users will be saved as
the personal mode by the machine
Remote Control Shortcut Keys
SMART S: Press SMART S key on the remote control. You can switch the function
among the, "STANDARD","NEWS", "MUSIC", "PERSONAL" four modes.
MUTE: Open or close sound.
VOL+/VOL-: Add or reduce volume.
Option
Function
Description
Increasing analog value increases bass;
BASS
Adjust bass value
Decreasing analog value decreases bass (0-100).
Increasing analog value increases treble;
Adjust treblevalue
TREBLE
Decreasing analog value decreases treble (0-100).
Increasing analog value decreasing left volume;
BALANCE
Adjust balanceof left orright sound
Decreasing analog value decreases right volume(0-100).
SOUND MODE Adjust audio effect mode
"STANDARD", "NEWS", "MUSIC", "PERSONAL" four modes.
17
Basic Operation Instruction
OSD
Select
to enter the OSD submenu. Press
"Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
OSD
OSD - H POSITION
OSD - V POSITION
OSD - DURATION
OSD - HALFTONE
OSD - LANGUAGE
5 0
5 0
1 5
1 0 0
ENGLISH
S E L
A D J
M E N U E X I T
Option
Function
Description
Increasing analog value, OSD menu movetoward right;
OSD-H POSITION Adjust H-position ofOSD menu
OSD-V POSITION Adjust V-positionof OSD menu
Decreasing analog value, OSD menu movetoward left (0-100).
Increasing analog value, OSD menu movetoward down;
Decreasing analog value, OSD menu movetoward up(0-100).
OSD-DURATION
OSD-HALFTONE
OSD LANGUAGE
Adjust duration ofOSD menu
Adjust halftone ofOSD menu
Choose OSD menudisplay language
Increasing analog value, extend duration timeof OSD menu;(5-60).
Increasing analog valueincreases halftone;
Decreasing analog valuedecreases halftone(0-100).
There are manylanguages to select
ADVANCE
Select
to enter the ADVANCE submenu.
Press "Up/Down"key on the remote control
or "CH+/CH-"key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the"VOL+/VOL-" key on
the front panel to adjust analog value or state
(see below table).
ADVANCE
SLEEP - TIMER
DCC
BLUE SCREEN
RESETTING
O F F
O F F
O N
S E L
A D J
M E N U E X I T
Option
Function
Description
SLEEP - TIMER
Set sleep timeof the machine
"Off, 15M, 30M, 45M, 60M, 120M", unit: minute.
"ON/OFF", two states.
DCC
Open or closeDCC
Open or closeBLUE SCREEN
Resume to settingof factory
"ON/OFF", two states.
BLUE SCREEN
RESETTING
Reset all values to setting of factory.
18
Basic Operation Instruction
TV
Select
to enter the TV submenu. Press
"Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right"key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
T
V
AUTO
M
MONO
OFF
COLOR SYSTEM
SOUND SYSTEM
MTS
SKIP
AUTO SCAN
MANUAL SEARCH
FINE TUNING
CHANNEL EDIT
S E L
A D J
M E N U E X I T
Option
Function
Description
COLOR SYSTEM
SOUND SYSTEM
Select color system
Select sound system
"PAL, NTSC,AUTO" three modes.
"I, D/K, M, AUTO, B/G" five modes.
MTS
Select MTS modes
Select skip ornot
Select auto scan
Select manul search
Select fine tuning
"STEREO, MONO, DUAL , DUAL " four modes.
"ON/OFF" two states.
SKIP
AUTO SCAN
MANUAL SEARCH
FINE TUNING
CHANNEL EDIT
Please refer to "AUTO SCAN"
Please refer to "MANUAL SEARCH"
Please refer to "FINE TUNING"
Please refer to"CHANNEL EDIT"
Select channel edit
AUTO SCAN
Select
to enter the submenu of TV. Then
5 3 . 0 0 MHZ
CH
2
press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select
''AUTO SCAN''. The machine perform search after pressing ''Right ''key on the
remote control or ''VOL+''on the front panel. (In the process of searching the channel
automatically, press the key of ''MENU'' on the remote control to stop searching).
Meanwhile, it will show Current Channel, Frequency. All of the TV programs will be
saved automatically.
MANUAL SEARCH
CHANNEL
SEARCH
2
Select to enter the submenu of TV. Then
press ''Up/Down'' key on the remote control
4 5 . 2 5 MHZ
or ''CH+/ CH-''on the front panel to select ''MANUAL SEARCH''. Then press the key
of ''Right'' on the remote control or ''VOL+'' on the front panel to enter submenu of
MANUAL SEARCH. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-'' on
the front panel to select channel No.. Press ''Up/Down'' key on the remote control to
select ''SEARCH '', press ''Left/Right'' key on the remote control again, the machine
begin searching toward low frequency or high frequency. (In the process of searching
the channel automatically, press the key of ''MENU'' on the remote control to stop
searching).
19
Basic Operation Instruction
FINE TUNING
Select to enter the submenu of TV. Then
press ''Up /Down'' key on the remote control
F I N E T U N I N G
5 5 . 2 5 MHZ
or ''CH+/ CH-'' on the front panel to select ''FINE TUNING''. Press ''Right'' key on the
remote control to enter submenu of ''FINE TUNING''. Press ''Left/Right'' key on the
remote control to adjust from low frequency or high frequency.
CHANNEL EDIT
Select
to enter the submenu of TV. Then
0 0 1
0 0 2
0 0 3
0 0 4
0 0 5
0 0 6
0 0 7
0 0 8
0 0 9
0 1 0
0 1 1
0 1 2
0 1 3
0 1 4
0 1 5
0 1 6
0 1 7
0 1 8
0 1 9
0 2 0
0 2 1
0 2 2
0 2 3
0 2 4
0 2 5
0 2 6
0 2 7
0 2 8
0 2 9
0 3 0
press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select
''CHANNEL EDIT''. Press ''Right'' key on the
remote control to enter submenu of
''CHANNEL EDIT'' (Press program list key on
the remote control to enter submenu of
''CHANNEL EDIT'').
1 NAME 2 DELETE
3 SWAP
MENU EXIT
NAME: Press ''Cursor'' key on the remote control to select channel. Press ''1'' key on
the remote control to name. Press ''UP/Down'' key on the remote Control to select
letter or number. Press ''Left/Right '' key on the remote control to move digit and then
press ''UP/Down'' key on the remote control to select letter or number. Press ''1'' key
on the remote control to confirm.
DELETE: Press ''Cursor'' key on the remote control to select channel which you wish
delete. Press ''2'' key on the remote control, and then press ''1'' to confirm.
SWAP: Press ''Cursor'' key on the remote control to select channel which you wish
change name's position, press ''3'' key on the remote control, then press ''UP/Down''
key on the remote control to select channel, press ''1'' to confirm.
Select Channels with "CH+/CH-" Key
Press Program key on the remote control or "CH+/ CH-" key on the front panel to
select the channels.
Select channels with the Return key you can go to the last channel when pressing
the Return key. For example, if the last channel is 10 and the current channel is 20,
you will go to channel 10 when pressing the Return key. You can switch the two
favourite channels as you like.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
Basic Operation Instruction
Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV
channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.
Note: With the mode of AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR, HDMI1,
HDMI2, PC all functions and adjustments are similar with TV. User can
check it at convenience. HDMI connector can realize DVI connector
function with external HDMI/DVI commutator.
USB signal source operation
please insert USB memory card into USB interface of TV, press "source" key on the
remote control or front panel to select USB signal source (if you don't insert the USB
memory card into USB interface of TV, operation is invalid), press "OK" key to enter.
Notice: This USB interface only support move U dish, can't connect move hard drive,
also can't connect to USB interface of computer. USB support file format with Mp3/
JPG. It isn't compatible with some of move U dishes, please replace move U dish.
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
Simple Troubleshooting
Symptom
Factor
Solution
1.Antenna cable connector is loose,
cable is damaged.
2.Channel setting is incorrect.
3.Antenna cable type is not matching.
4.Direction or position of antenna
cable is incorrect.
1.Check the antenna cable connector plug whether or
not loose, cable whether or not perfect.
2.Refer to channel setting method, resetting again.
3.Check antenna cable type(VHF/UHF)
4.Adjust direction or position of antenna cable .
5.Attempt to use signal amplifier.
Snowflake speckle and
sound noise.
5.Signal is weak.
TV image isbetter, buthas
noise.
TV system settingis incorrect.
Enter to "TV"menu, reset soundsystem again .
1.Check powercord whether ornot connect well.
2.Check if " " on thefront panel ison.
3.Press "power"on the remotecontrol.
Power plug isloose, power
cord don't connectwell.
No image. No sound.
TV image havestripe.
Signal is exposedto disturb,
such as car, neon light,
electric blower etc.
Don't use electric blower around machine, adjust
antenna cable direction to reduce disturb.
1.TV signalis reflected byvalley
or building.
2.Towarddirection of antenna
cable is incorrect.
1.Use high directionalantenna cable. UseFINE
TUNING of "TV".
2.Adjust toward directionof antenna cable.
TV image haveshadow.
No color.
1.Color saturation is too low.
2.Color system is incorrect .
1.Enter "PICTURE"to add upcolor saturation.
2.Enter "TV" tochange color system.
1.Adjust volumeto proper value.
2.Press "MUTE"button on remotecontrol to
eliminate mute.
1.Volumesetting is toolow.
2.Sound ismuted.
3.Sound system isincorrect.
TV no sound.
3.Enter "TV" tochange sound system.
Computer no display, and
prompt no signal input, red Signal cable is loose or fall off.
indicator LED twinkling.
Check signal cable whether or not loose, fall off,
reconnect well again.
1.Receive window of remote
1.Remove objects, avoiding cover the receive
window of remote control.
2.Change battery.
continue was covered by
Remote control distance is
objects.
short, lose control.
2.The battery energy of remote
control is to low.
1.Adjustment is incorrect.
Computer display faintly.
1.Use auto-adjustment function.
2.Use commend mode.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Enter "GEOMETRY" to adjust horizontal or
vertical position.
Computer display image
1.Adjustment is incorrect.
excursion, not full screen,
2.Display mode is incorrect.
over screen.
3.Use recommended mode.
Noise Signals at turning off. Electrical release at turning off.
Exterior influence, forexample
It is normal.
Press " "button on thefront panel toturn off
electrical source, thenpress " "button to turn
on the TV again after1-2 minutes.
lightning, static electricityand so
Can not operatethis
on, which arepossibly to disturb
machine.
the normal operationof this
machine.
CAUTION: Don't let your machine display the same picture for a long time, please set up a screen protection
procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen.
Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this trouble
can't be repaired, Which isn't in range of warranty.
22
|