Halo Lighting System Indoor Furnishings L650 User Manual

®
HALO  
MINIATURE  
Miniature Trac Provides Versatility  
for Every Lighting Need  
Grounding  
To ensure safe operation the entire track  
system is fully polarized and grounded.  
Grounding is accomplished  
automatically by a separate solid copper  
ground conductor in the track. The  
ground conductor maintains continuity  
to the building’s grounding system  
through the ground contact fingers in  
each of the connectors.  
Miniature size, decorator finishes, push-  
in connectors, economy, all combine to  
make single-circuit Miniature Trac perfect  
for residential or commercial use.  
Size  
Miniature Trac is only 11/16” (17.5mm)  
deep by 1 3/8” (35mm) wide.  
Specifications  
Finishes  
The structural channel is extruded  
aluminum with .060” nominal wall  
thickness. Conductors are solid copper  
buss bars encased in rigid extruded PVC  
insulators. Polarized connectors and end  
caps are molded polycarbonate.  
Miniature Trac is available in six finishes  
to meet any decorating need: White,  
Matte Black, Antique Brass, Polished  
Brass, Bronze and Silver.  
L650, L651, L652, L653  
Electrical capacity is 20 AMPS. Halo  
Miniature Trac is UL listed, CSA certified.  
Connectors  
Connectors simply push into the ends of  
the Trac, eliminating splicing. Ls, T’s, X’s  
and the Flexible Connector allow track to  
be assembled in almost any pattern.  
L650–2’ Track. Actual length 20 1/8”(511mm).  
Finishes: White (P), Black (MB), Bronze( BZ),  
Antique Brass (AB), Polished Brass (B), Silver (SL)  
Polarity  
A visual polarity line on Power-Trac units  
indicates proper electrical installation.  
Simply line up polarity on Power-Trac  
and lampholder adapter.  
L651–4’ Track. Actual length 44 1/8”(1121mm).  
Finishes: White (P), Black (MB), Bronze( BZ),  
Antique Brass (AB), Polished Brass (B), Silver (SL)  
L652–8’ Track. Actual length 92 1/8”(2340mm).  
Finishes: White (P), Black (MB), Bronze( BZ),  
Antique Brass (AB), Polished Brass (B), Silver (SL)  
L653–12’ Track. Actual length 140 1/8”(3559mm).  
Finishes: White (P), Black (MB), Silver (SL)  
WIRING DETAILS  
This single circuit, low-profile Trac is ideal for applications  
where there is need for one lighting circuit.  
Should more circuit control be required, switched feed  
points can be made at additional connectors.  
Feed Point A  
Feed Point B  
Feed Point C  
ACCESSORIES  
L900  
Outlet Box Cover  
L901  
Live End Connector  
Can be used at any electrical feed connection  
point (Live, Straight, L, T or X). Size: 5” sq.  
Screws included.  
To start a run.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L902  
Flexible Connector  
L903  
Straight Connector  
To connect two track sections at any angle up to  
90° in either plane or wall to ceiling or pitched  
ceiling applications.  
To connect two track sections end-to-end.  
L903 differs from mini connector L908 in  
that it provides a center feed option and is  
longer. May be used as feed point.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
COOPER LIGHTING  
310  
 
®
HALO  
L1903 Straight Connector and  
L1901 Live End Connector  
Housing  
Housing  
Connect two Miniature Power-Trac sections end  
to-end.  
To start a run. L901 or L941 required to  
complete installation.  
Finish: White (P)  
Finish: White (P)  
L1943 To connect two Halo-2 Power-Trac  
sections end-to-end.  
Finish: White (P)  
L1904 L Connector Housing  
L1905 T Connector Housing  
To connect two track sections at 90° angle.  
L904 or L943 required to complete  
installation.  
To connect three track sections into a T  
configuration. L905, L945R or L945L required to  
complete installation.  
Finish: White (P)  
Finish: White (P)  
L930  
Housing End Cap  
L1906 X Connector Housing  
For symmetry of installation at end of run.  
To connect four track sections into a cross  
configuration. L906 or L946 required to  
complete installation.  
Finish: White (P)  
Finish: White (P)  
L934  
Cross Tee Adapter Clip  
L932  
Cross Tee Adapter Clip  
Use in track housing groove to assemble 9/16”  
cross tee. For use with Chicago Metallic Tempra  
4000 System, National Rolling Mills SLK System,  
Donn Corporation Centricitee System.  
Use in track housing groove to assemble  
15/16” cross tee. For use with Chicago  
Metallic 200 System, National Rolling Mills  
ML System, Donn Corporation DX  
System.  
L937  
Raceway Cover  
L935  
Recessed Housing  
Hanger  
Cover allows Recessed Housing to be used as  
Raceway to carry up to 6 #12 AWG wires. 4’  
lengths. One cover is required for each raceway  
channel.  
Use to suspend Recessed Power-Trac  
Housing.  
L939  
Lathing Tab  
L938  
Cross Tee End  
Use to suspend Recessed Power-Trac Housing to  
carrying channel (10” long).  
For use when cross tee is cut. Pop rivet to  
cross tee and insert into L932, L934 cross  
tee adapter.  
L940  
Mini Connector Kit  
Contains two joiner strips and hardware.  
For recessed channel when using L908 or  
L949.  
COOPER LIGHTING  
321  
 

Grizzly Tool Storage H6462 User Manual
Haier Flat Panel Television LE39M7000CF User Manual
Haier Freezer AFL631CB U User Manual
Haier Heat Pump HR18D2VAR User Manual
Hotpoint Electric Pressure Cooker C220E User Manual
HP Hewlett Packard Water Pump 71576286 User Manual
Humax Cable Box VA 5200 User Manual
Hunter Fan Ventilation Hood 48054 User Manual
iLive MP3 Docking Station ITP280B User Manual
Iluv Printer ISP200 User Manual