Hunter Fan Fan 90401 User Manual

ClassicTable Fan  
Oscillating Fan  
OwnersManual  
Models  
90401  
90402  
44832-01  
20130103  
©2013 Hunter Fan Co.  
 
WELCOME  
UNPACKING  
Thank you for choosing the Hunter  
Classic Table Fan. This manual gives  
you complete instructions for using  
your fan. Here are some the features  
you will enjoy with your fan:  
As you unpack the fan, save the carton  
and packing materials in case you want  
to move or ship the unit in the future.  
Carefully remove all items from the box.  
Make sure all shipping materials are  
removed from fan before operating.  
• An attractive design that  
enhances any decor  
• A powerful Hunter motor for  
maximum air flow  
• Three speeds to adjust your  
comfort level  
Before using your fan, record the  
following information for your records  
and for warranty assistance.  
Model Name _________________  
Date Purchased ______________  
Where Purchased _____________  
Please attach your  
receipt or a copy of  
your receipt to this manual  
for future reference.  
3
 
GROUNDING INSTRUCTIONS  
This appliance is for household  
LINE CORD SAFETY TIPS  
use only and may be plugged into  
any 120-volt AC electrical outlet  
(ordinary household current). DO  
NOT use any other type of outlet.  
1. NEVER pull or yank on the  
cord or the appliance.  
2. To insert plug, grasp it firmly  
and guide it into the outlet.  
3. To disconnect the appliance,  
grasp the plug and remove it  
from the outlet.  
WARNING  
This unit is suitable for grounded  
receptacle use only.  
4. Before each use, inspect  
the line cord for cuts and/or  
abrasion marks. If any are  
found, the appliance should  
be serviced and the line cord  
replaced. Please return it  
to our Service Department  
or to an authorized service  
representative.  
The cord has a grounded plug as  
shown in Figure 1. An adapter,  
(not included) as shown in Figure  
2, is available for connecting  
three-blade grounding-type  
plugs to two-slot receptacles.  
The green grounding lug  
extending from the adapter must  
be connected to a permanent  
ground such as a property  
5. NEVER wrap the cord tightly  
around the appliance, as this  
could place undue stress on  
the cord where it enters the  
appliance and could cause it  
to fray and break.  
grounded outlet box. The adapter  
should not be used if a three-slot  
grounded receptacle is available.  
6. DO NOT operate appliance  
if the line cord shows any  
damage, if the appliance  
works intermittently or stops  
working entirely.  
Grounded  
Plug  
Adapter  
Metal  
Screw  
Grounding  
Means  
Grounded Outlet  
Box Cover  
Grounding  
Pin  
Grounded Outlet  
Box Cover  
FIGURE 1  
FIGURE 2  
4
 
FUSED PLUG  
This plug has a safety feature. It  
contains a safety device (fuse) that  
should not be removed. Discard  
product if the attachment plug is  
damaged. To reduce the risk of fire,  
electric shock and personal injury,  
DO NOT remove, replace, repair or  
tamper with the originally supplied  
plug. If the Fan does not function  
properly, it may be due to the safety  
device incorporated in this plug.  
If the fuse fails, it is generally  
Figure 3  
Figure 4  
Figure 5  
due to a short circuit or circuit  
overload. Replace the fuse as  
per the instructions below. If the  
replacement fuse fails, immediately  
unplug the unit and contact our  
technical support department for  
assistance.  
Fuse Replacement:  
1. To replace the fuse, first turn the  
unit it off and unplug it from the  
wall. Locate the door on top of  
the plug. Figure 1.  
2. Slide the door on top of the plug  
towards the blades. Figure 2.  
3. Carefully remove the fuse from  
the clips holding it on the top and  
bottom. Figure 3.  
WARNING  
Electrical Hazard! Only replace with  
a fuse type and rating matching what  
was removed from the product.  
4. Gently push the fuse back into  
the pins that will hold it in place.  
Note: If the fuse is not seated properly,  
the unit will not function.  
5. Slide the Door back over the fuse  
box in the plug.  
6. Plug the fan back in and  
resume use.  
5
 
OPERATION  
4. To select the speed, move the  
power/speed lever from OFF to  
the desired speed setting: O (off),  
I (low), II (medium), III (high).  
This appliance is for household use only.  
1. Place the fan on a dry, safe, flat  
surface where it cannot fall or  
be pulled by the cord.  
5. To make the fan oscillate, push  
the oscillation knob down. To stop  
oscillating, pull the oscillation  
knob up. The oscillation knob  
is located on the top of the fan  
housing, near the handle.  
2. Plug the fan into a grounded  
120-volt AC electrical outlet  
(ordinary household current).  
DO NOT use any other type of  
outlet. Make sure that the rated  
voltage of the fan is the same  
as the power source before  
plugging it into the power  
source.  
3. Turn the fan “ON” or “OFF” by  
moving the power/speed lever.  
The power should always be  
OFF before unplugging the fan.  
Handle  
Oscillation Knob  
Motor Housing  
Power/Speed  
Lever  
Base  
FIGURE 6  
6
 
MAINTENANCE  
This fan is permanently lubricated and  
will not require additional lubrication (oil)  
for the life of the fan.  
CLEANING GRILL AND BLADE:  
1. Turn the fan off and unplug  
from the electrical outlet.  
This fan requires little maintenance  
and contains no user serviceable parts.  
DO NOT try to fix it yourself. Contact  
qualified service personnel  
2. Disassemble grills by carefully  
removing the screw on the  
bottom of the ring. See Figure 4.  
3. Remove the ring.  
if servicing is needed.  
4. Use a dry or slightly damp lint  
free cloth to clean the fan.  
TO CLEAN:  
1. Before cleaning, turn fan off  
and unplug from electrical  
outlet. Wipe off excess dust  
with a lint-free cloth.  
5. Use a soft, slightly damp cloth  
to wipe the remaining fan parts.  
6. DO NOT allow water or any  
other liquid to get into the motor  
housing or base.  
2. To ensure adequate air  
circulation to the motor, keep  
vents located at the rear of  
the motor housing free from  
dust accumulation. A vacuum  
cleaner hose can be used to  
clean these vents.  
7. Reassemble the fan after  
blades and grills have dried  
completely. Align the grills,  
replace the ring, and replace  
the screw.  
8. DO NOT plug fan into an  
electrical outlet until it has been  
fully reassembled.  
3. DO NOT immerse the fan in  
water or any other liquid.  
Front  
Grill  
Back  
Grill  
Handle  
Blade  
Screw  
Oscillation  
Knob  
Motor Housing  
Power/Speed Lever  
Ring  
Base  
FIGURE 7  
7
 
STORAGE  
TROUBLESHOOTING  
1. Disassemble and clean fan  
before storing.  
PROBLEM  
• Fan will not oscillate.  
SOLUTION  
2. Keep the original packaging for  
the purpose of storing the fan.  
• Push down on knob on top of motor  
3. ALWAYS store the fan in a  
dry place.  
housing to activate oscillation.  
If you have tried these troubleshooting  
solutions and still have trouble, call  
1-888-830-1326 (For CAN: 1-866-  
268-1936) or visit our Web site at  
4. NEVER store the fan while it is  
still plugged in.  
5. NEVER wrap the cord tightly  
around the fan.  
6. DO NOT put any stress on the  
cord where it enters the fan, as  
it could cause the cord to break.  
8
 
WARRANTY  
The Hunter Fan Company makes the PURPOSE, ARE VOIDED. NO  
following limited warranty to the user WARRANTY,EXPRESSEDORIMPLIED,  
or consumer purchaser of this Hunter INCLUDING ANY WARRANTY OF  
Portable fan:  
MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE, IS MADE  
If your Hunter Portable Fan motor IN RESPECT TO THE GLASS GLOBES  
fails at any time within one year after OR LIGHT BULBS OR THE FINISH  
the date of sale to you due to a defect ON ANY METAL PORTION OF THE  
in material or workmanship, labor FAN. THIS WARRANTY IS IN LIEU OF  
to repair the defect will be provided ALL OTHER EXPRESS WARRANTIES.  
free of charge at our nearest service THE DURATION OF ANY IMPLIED  
center or our Service Department WARRANTY,  
INCLUDING,  
BUT  
in Memphis, Tennessee. You will NOT LIMITED TO ANY IMPLIED  
be responsible for labor costs after WARRANTY OF MERCHANTABILITY  
this one-year period. The foregoing OR FITNESS FOR A PARTICULAR  
limited warranty applies only to the PURPOSE, IN RESPECT TO ANY  
motor itself, and does not apply to HUNTER FAN MOTOR OR OTHER  
electronic controls such as remote FAN PART, IS EXPRESSLY LIMITED  
controls, remote control receivers or TO THE PERIOD OF THE EXPRESS  
transmitters used in conjunction with WARRANTY SET FORTH ABOVE FOR  
the motor. These electronic control SUCH MOTORS AND OTHER PARTS.  
items are included in the one year  
limited warranty below.  
This warranty is voided if your  
Hunter Fan is not purchased and  
If any part of your Hunter Portable used in the USA.  
Fan other than the motor fails at any  
time with one year after the date of This warranty excludes and does  
sale to you due to a defect in material not cover defects, malfunctions or  
or workmanship, we will repair or, at failures of any Hunter Portable fan  
our option, replace the defective part which were caused by repairs by  
free of charge for parts and labor persons not authorized by us, use of  
performed at our nearest service parts or accessories not authorized  
center or at our Service Department by us, mishandling, improper  
in Memphis, Tennessee.  
installation,  
damage to the Hunter Portable  
modifications,  
or  
IF THE USER OR CONSUMER fan while in your possession,  
PURCHASER CEASES TO OWN THE or unreasonable use, including  
FAN, THIS WARRANTY AND ANY failure to provide reasonable and  
IMPLIED WARRANTY WHICH THEN necessary maintenance.  
REMAINS IN EFFECT, INCLUDING  
BUT NOT LIMITED TO ANY IMPLIED To obtain servicing, contact the  
WARRANTY OF MERCHANTABILITY nearest Hunter authorized service  
OR FITNESS FOR A PARTICULAR center or the Hunter Fan Company  
9
 
Service Department, 7130 Goodlett  
Farms Pkwy. Suite 400, Memphis,  
Tennessee 38016. Please contact us  
before shipping your fan to us. If we  
authorize you to ship it to us, you  
will be responsible for all insurance  
and freight or other transportation  
charges to our factory service  
center. We will return your Hunter  
Fan freight prepaid. Your portable  
fan should be properly packed  
to avoid damage in transit since  
we will not be responsible for any  
such damage. Proof of purchase is  
required when requesting warranty  
service. The purchaser must present  
sales receipt or other document that  
establishes proof of purchase.  
IN NO EVENT SHALL HUNTER  
FAN COMPANY BE LIABLE  
FOR  
CONSEQUENTIAL  
OR  
INCIDENTAL DAMAGES.  
SOME STATES DO NOT ALLOW  
LIMITATIONS ON HOW LONG  
AN  
IMPLIED  
WARRANTY  
LASTS OR THE EXCLUSION OR  
LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL  
DAMAGES  
SO THE ABOVE LIMITATION MAY  
NOT APPLY TO YOU.  
THE WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS AND  
YOU MAY ALSO HAVE OTHER  
RIGHTS WHICH VARY FROM  
STATE TO STATE.  
Company  
7130 Goodlett Farms Pkwy., Suite 400  
Memphis, Tennessee 38016  
Impreso en China y Taiwán  
10  
 

Grace Turntable GDI VW05 User Manual
Grizzly Paint Sprayer H6330 User Manual
Haier Flat Panel Television LE42H5000 User Manual
Harbor Freight Tools Impact Driver 92921 User Manual
Hotpoint Oven osx 1036n dcx s User Manual
Hotpoint Washer WMAQL 621 User Manual
HP Hewlett Packard Server DL100 Series User Manual
HP Hewlett Packard Switch 2000fc User Manual
Hyundai Appliance Trim Kit 95 7333 User Manual
IBM Computer Drive 48X 20X User Manual