Husqvarna Microscope Magnifier DS50 User Manual

Operator’s manual  
Please read the operator’s manual carefully and make sure  
you understand the instructions before using the machine.  
GB  
ES  
Manual de  
DS50  
AT/ATS  
DS70  
AT  
instrucciones  
Lea detenidamente el manual de instrucciones y asegúrese  
de entender su contenido antes de utilizar la máquina.  
Bedienungsanweisung  
Lesen Sie die Bedienungsanweisung sorgfältig durch und  
machen Sie sich mit dem Inhalt vertraut, bevor Sie das  
Gerät benutzen.  
DE  
FR  
GB ES DE FR  
Manuel d’utilisation  
Lire attentivement et bien assimiler le manuel d’utilisation  
avant d’utiliser la machine.  
HUSQVARNA CONSTRUCTION PRODUCTS  
 
CONTENTS  
Contents  
KEY TO SYMBOLS  
Symbols on the machine: .............................................  
Symbols in the operator’s manual: ...............................  
CONTENTS  
Contents ......................................................................  
WHAT IS WHAT?  
4
What is what on the stand? .........................................  
SAFETY INSTRUCTIONS  
Steps before using a new stand ...................................  
Personal protective equipment .....................................  
General safety precautions ..........................................  
General working instructions .......................................  
PRESENTATION  
Stand DS50 and DS70 ................................................  
ASSEMBLY  
Assembling the stand ...................................................  
Assembly of drill motor .................................................  
Before drilling ............................................................... 10  
MAINTENANCE  
Stand maintenance ...................................................... 11  
TECHNICAL DATA  
Dimensions .................................................................. 12  
The column's angling ................................................... 13  
Weight .......................................................................... 13  
EC-declaration of conformity ........................................ 14  
English – 3  
 
 
WHAT IS WHAT?  
1
23  
20  
19  
18  
28  
16  
28  
27  
22  
15  
2
13  
14  
21  
30  
12  
4
28  
3
11  
17  
9
10  
5
7
6
8
26  
24  
29  
25  
31  
What is what on the stand?  
1
2
3
4
5
6
7
8
9
Locking screw  
17 Expansion attachment  
18 Drill column  
Spirit level  
Locking screw, locking clamp  
Feeder housing lock  
Locking screw drill column  
Position ring  
19 Stop washer  
20 Locking clamp for quick mounting  
21 Mounting for feed lever  
22 Clamping screws for glide plates  
Locking screw, position ring  
Adjustment screws  
23 Quick mounting for automatic feed unit (both sides of  
feeder housing) (Accessory)  
24 Operators manual  
25 Retaining ring (Accessory)  
26 Expander (Accessory)  
27 Locking knob  
Locking screw, angle drill column  
10 Locking screw, wheel  
11 Locking screw, pivot function on drill column  
12 Quick mounting  
28 Water collector (Accessory)  
29 Distance (Accessory)  
30 Stabilizer (Accessory)  
31 Tool kit  
13 Lock button, feed lever  
14 Feed lever  
15 Handle  
16 Adjustment screw feeder housing against drill column  
4 – English  
 
SAFETY INSTRUCTIONS  
Steps before using a new stand  
Personal protective equipment  
Please read the operator’s manual carefully and make  
sure you understand the instructions before using the  
machine.  
WARNING!You must use approved personal  
protective equipment whenever you use the  
machine. Personal protective equipment  
cannot eliminate the risk of injury but it will  
reduce the degree of injury if an accident  
does happen. Ask your dealer for help in  
choosing the right equipment.  
!
This machine is designed for and intended for drilling  
concrete, brick and different stone materials. All other use  
is improper.  
The machine is intended for use in industrial applications  
by experienced operators.  
Protective helmet  
Keep the workplace tidy. Disorder leads to accident risks.  
Hearing protection  
Also read the operating manual enclosed with the drill  
motor and check that its performance is compatible with  
the stand.  
Protective goggles or a visor  
Always use common sense  
It is not possible to cover every conceivable situation you can  
face. Always exercise care and use your common sense.  
Avoid all situations which you consider to be beyond your  
capability. If you still feel uncertain about operating  
procedures after reading these instructions, you should  
consult an expert before continuing. Do not hesitate to  
contact your dealer or us if you have any more questions  
about the use of the machine. We will willingly be of service  
and provide you with advice as well as help you to use your  
machine both efficiently and safely.  
Breathing mask  
Heavy-duty, rm grip gloves.  
Let your Husqvarna dealer regularly check the machine and  
make essential adjustments and repairs.  
All information and all data in the Operator’s Manual were  
applicable at the time the Operator’s Manual was sent to print.  
WARNING! Under no circumstances may the  
Tight-fitting, heavy-duty and comfortable clothing that  
permits full freedom of movement.  
design of the machine be modified without  
the permission of the manufacturer. Always  
use genuine accessories. Non-authorized  
modifications and/or accessories can result  
in serious personal injury or the death of the  
operator or others.  
!
Boots with steel toe-caps and non-slip sole.  
Always have a first aid kit nearby.  
English – 5  
 
   
SAFETY INSTRUCTIONS  
General safety precautions  
General working instructions  
Please read the operator’s manual carefully and make  
sure you understand the instructions before using the  
machine.  
Basic safety rules  
WARNING! There is always a risk of crush  
injuries when working with products  
containing moving parts. Wear protective  
gloves to avoid body injuries.  
Do not use the machine in bad weather, such as dense  
fog, rain, strong wind, intense cold, etc. Working in bad  
weather is tiring and can lead to dangerous conditions,  
e.g. slippery surfaces.  
!
Never use the machine if you are tired, if you have drunk  
alcohol, or if you are taking medication that could affect  
your vision, your judgement or your co-ordination.  
Never start to work with the power cutter before the  
working area is clear and you have a firm foothold. Look  
out for any obstacles with unexpected movement. Ensure  
when cutting that no material can become loose and fall,  
causing operating injury.  
Wear personal protective equipment. See instructions  
under the heading Personal protective equipment.  
Ensure that the working area is sufficiently illuminated to  
create a safe working environment.  
Never use a machine that is faulty. Carry out the checks,  
maintenance and service instructions described in this  
manual. Some maintenance and service measures must  
be carried out by trained and qualified specialists. See  
instructions under the heading Maintenance.  
Make sure that no pipes or electrical cables are routed in  
the area to be drilled.  
Always check the rear side of the surface where the drill  
bit will emerge when drilling right through. Secure and  
cordon off the area and make sure that no one can be  
injured or material damaged.  
Never allow anyone else to use the machine without first  
ensuring that they have understood the contents of the  
operator’s manual.  
People and animals can distract you causing you to lose  
control of the machine. For this reason, always remain  
concentrated and focused on the task.  
Never work alone, always ensure there is another person  
close at hand. Apart from being able to receive help to  
assemble the machine, you can also get help if an  
accident should occur.  
Be careful as clothing, long hair, and jewellery can get  
caught in moving parts.  
Keep all parts in good working order and ensure that all  
fixtures are properly tightened.  
Transport and storage  
Do not store or transport the stand with the drilling machine  
fitted in order to protect your stand from damage.  
Store the equipment in a lockable area so that it is out of  
reach of children and unauthorised persons.  
Store the drilling machine and stand in dry and frost free  
conditions.  
6 – English  
 
   
PRESENTATION  
The feeder housing's transmission is adjustable. The  
higher gives 2.5:1 and the lower, 1:1. The feed lever can  
be mounted on both sides of the feeder housing.  
Stand DS50 and DS70  
The feeder housing is equipped with a quick mounting for  
a number of drilling machines.  
It is our wish that you will be satisfied with your product and  
that it will be your companion for a long time. Think of this  
operators manual as a valuable document. By following its′  
content (using, service, maintenance etc) the life span and  
the second-hand value of the machine can be extended. If  
you will sell this machine, make sure that the buyer will get the  
operators manual.  
The feeder housing's slide function on the column is  
adjusted with the 2 adjustment screws.  
A purchase of one of our products gives you access to  
professional help with repairs and services whenever this  
may be necessary.If the retailer who sells your machine is not  
one of our authorised dealers, ask him for the address of your  
nearest service workshop.  
Husqvarna Construction Products has a policy of continuous  
product development. Husqvarna reserves the right to modify  
the design and appearance of products without prior notice  
and without further obligation introduce design modifications.  
The feed lever is equipped with a lock button for release.  
The stand features a modular design.  
The stand makes angle drilling and pivot function  
possible.  
Only fixed spanner (24 mm) and hex-key (6 mm) are  
required to change the settings.  
The drill column can be variably adjusted through 360°.  
The feeder housing is prepared for quick mounting for  
automatic feed unit which fits on both sides.  
The stands are secured using expanding screws.  
The drill column can be dismounted from the base plate.  
This makes assembly easier.  
The transport wheels can be removed.  
English – 7  
 
 
PRESENTATION  
Accessories  
Water collector  
Quick mounting for automatic feed unit (both sides of  
feeder housing)  
Retaining ring  
Expander  
Distance  
Stabilizer For extra support.  
8 – English  
 
ASSEMBLY  
Assembling the stand  
Assembly of drill motor  
1
Lock the feeder housing on the drill column with the lock  
handle.  
1
2
Drill holes (15 mm) in the floor or in the wall and knock in  
the expander bolts.  
2
Loosen the locking screw for the locking clamp.  
Screw the base plate tight. Check carefully that the  
expander is secured correctly.  
3
4
Always remove the drill bit before the motor is mounted or  
dismounted.  
The drill column is mounted on the base plate’s angle  
bracket. Fasten the locking screw with a 24 mm spanner.  
Mount suitable drilling machine on the quick mounting.  
Mount the quick mounting and drilling machine in the track  
on the locking clamp.  
The drill column can be variably adjusted through 360°. With  
help of the locking screw for the pivot function, the column can  
be adjusted in four fixed  
3
The column can be angled by loosening the locking  
screws with a 24 mm spanner.  
5
6
Fasten the locking clamp with the locking screw.  
Set the feed lever to a suitable transmission.  
To angle the column parallel to the base plate, loosen the  
screw on the positioning ring.  
7
8
Unlock the feeder housing.  
Start drilling. See manual for selected drilling machine.  
The slide function on the feeder housing is factory set. To  
adjust the slide function, see maintenance.  
English – 9  
 
   
ASSEMBLY  
Before drilling  
WARNING! Before drilling, check that all  
locking screws are tightened well. Serious  
accidents can occur if the concrete core  
remains in the drill when backing out the  
drill motor/drill from the floor, wall or ceiling.  
!
!
WARNING! If the vacuum plate is used, make  
sure the support surface is not porous and  
can loosen from the floor or the wall. Make  
sure that the vacuum pump has sufficient  
power to secure the vacuum plate.  
The vacuum plate must never be used for  
ceiling drilling. Careless or incorrect use can  
result in serious, even fatal injury.  
IMPORTANT! Ensure that water cannot leak into the  
machine when drilling in the ceiling. Use an appropriate  
water collector and cover the machine in plastic, but do not  
cover the air intakes and air outlets.  
10 – English  
 
 
MAINTENANCE  
3
Loosen the adjustment screws.  
Stand maintenance  
The lifetime of your machine can be extended considerably if  
it is used, cared for and maintained in the proper manner.  
4
Loosen 2*4 clamping screws for the glide plates.  
IMPORTANT! All types of repairs may only be carried out by  
authorised repairmen. This is so that the operators are not  
exposed to great risks.  
Cleaning and lubrication  
5
6
7
Remove the glide plates.  
Lay down the stand.  
IMPORTANT! Remove the drill motor.  
Mount a new lower glide plate on the column. Fit the  
feeder housing on the column and fasten the lower glide  
plate on the feeder housing. Mount a new upper glide  
plate on the column. Fasten the upper glide plate on the  
feeder housing.  
It is important that the drill stand is kept clean for  
functionality to be maintained.  
Clean the stand using a high pressure washer and then  
wipe dry.  
Lubricate the moving parts on the stand. Apply standard  
grease to counteract corrosion on the contact surfaces.  
Daily maintenance  
1
2
3
Check that nuts and screws are tight.  
Clean the outside of the machine.  
IMPORTANT! The glide plates' surfaces must be parallel.  
Check the slide function on the glide plates. Change the  
glide plates if there is a backlash between the glide plates  
and the drill column.  
8
Fasten the rear clamping screws (4).Then fasten the front  
(4) clamping screws.  
Changing glide plates  
1
2
Remove the drill motor.  
Remove the feeder housing from the column.  
9
Adjust the play between column and feeder housing with  
the adjustment screws.  
English – 11  
 
 
TECHNICAL DATA  
Dimensions  
DS50 DS70  
DS50 ATS  
7
8
1
10  
2
4
DS50, mm/inch  
438/17,2  
320/12,6  
526/20,7  
235/9,3  
DS70, mm/inch  
1
2
3
4
5
6
7
8
9
10  
438/17,2  
340/13,4  
546/21,5  
265/10,4  
971/38,2  
1140/44,9  
177/7,0  
1026/40,4  
1205/47,4  
-
-
-
-
231/9,1  
1158/45,6  
450/17,7  
Stroke , mm/inch --------------------- Expander ------------- Max. drill diameter, mm/inch  
DS50 DS70  
DS50 0-676/0-26,6  
DS70 0-757/0-29,8  
Track width, mm/inch  
DS50/DS70 20  
DS50 350  
DS70 600  
12 – English  
 
 
TECHNICAL DATA  
The column's angling  
360°  
Weight  
1
8
2
3
7
4
5
6
DS50, kg/lbs  
6,7/14,7  
7,8/17,2  
0,6/1,3  
-
DS70, kg/lbs  
9,1/20,0  
9,7/21,3  
0,6/1,3  
0,8/1,8  
-
1
2
3
4
5
6
7
Drill column  
Feeder housing  
Quick mounting  
Feed lever  
Feed lever  
0,8/1,8  
9,2/20,2  
4,1/9,0  
Base plate  
12,0/26,4  
4,1/9,0  
Transport wheels  
Total weight without  
stabilizer  
29,2/64,2  
36,3/79,9  
8
Stabilizer  
9,1/20,0  
-
English – 13  
 
   
TECHNICAL DATA  
EC-declaration of conformity  
(Applies to Europe only)  
Husqvarna Construction Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the  
stands Husqvarna DS50AT and DS70AT from 2007’s serial numbers and onwards (the year is clearly stated in plain text on the  
type plate with subsequent serial number) are in conformity with the requirements of the COUNCILS DIRECTIVES:  
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.  
The following standards have been applied:  
SE-EN12348  
The supplied stand conforms to the example that underwent EC type examination. The stand must conform to applicable  
regulations, EU-requirements as well as national requirements.  
Göteborg, May 5, 2006  
Martin Larsson, R&D-manager  
14 – English  
 
 
www.husqvarnacp.com  
1150979-20  
´®z+RLT¶07¨  
´®z+RLT¶07¨  
2007-09-26  
 

Graco Baby Playpen ISPP025AA User Manual
Grundig Flat Panel Television Rom 32 CLE 8130 BL User Manual
Haier Freezer HNCM035E User Manual
Haier Washer XPM20 A User Manual
Hamilton Watch Watch 251471 User Manual
HP Hewlett Packard Mouse CQ45 323TX User Manual
HP Hewlett Packard Personal Computer B2B13UT User Manual
HP Hewlett Packard Portable Media Storage AP836B User Manual
IBM Laptop GC28 1982 02 User Manual
Impex Home Gym PHC 750 User Manual