iHome Stereo Receiver iH10 User Manual

Model iH10/iH14  
AM/FM for your iPod®  
F
M
NOTE: THIS UNIT WILL NOT CHARGE 3G iPod  
 
quick start  
3:inserts  
1:power  
2:antenna  
Select the dock insert for your  
iPod® model from the table  
below and place insert in dock.  
Never dock an iPod without  
an insert in place.  
Attach AC adaptor plug to  
jack on back of the unit and  
plug the other end into a  
wall socket.  
Snap AM antenna into provided  
stand, then plug antenna cable  
into socket on back of unit.  
Move antenna 12away.  
iPod nano  
Insert 8  
iPod with video (30 GB)  
Insert 9  
iPod with video (60,80 GB)  
Insert 10  
NOTE: If you do not have an insert for  
your iPod, please visit an Apple store,  
toll free at 800-288-2792 to purchase one.  
iPod nano  
thin (30 GB) iPod with video thick (60,80 GB) iPod with video  
4:iPod  
5:radio  
F
M
Insert an iPod® into the dock with  
proper insert (iPod must not be in  
a skin or case).The iPod will charge  
while docked. Turn the Function  
knob to iPod and press play on your  
iPod to play it .  
Turn the Function knob to AM  
or FM to select AM or FM radio  
band.Turn the Tuning knob to  
desired radio station.  
1
 
Controls and Indicators  
Dock  
Volume Knob  
Power ON LED  
Tuning Knob  
Function Knob  
AM Loop ᕥ  
Antenna socket  
Aux-in Jack ᕦ  
Headphones Jack ᕧ  
EXB switch ᕨ  
AC Adaptor Jack  
FM Antenna  
2
 
Using Your iHome  
Connect Unit to Power Source  
Plug the AC adaptor cable into the AC Adaptor Jack on the back of the unit and the other end into a standard 120VAC  
wall outlet.  
Install iPod Insert  
Your unit comes with 3 removable inserts to ensure your iPod fits properly in Dock. Please see insert table on Quick Start  
Section. USE PROPER INSERT TO AVOID DAMAGE TO iPOD OR UNIT.  
Playing and charging your iPod  
1. Place proper insert for your iPod in Dock, then gently dock iPod. When docked, iPod will charge until fully charged.  
The iPod will not overcharge.  
2. Turn the Function Knob to iPod and press play on iPod to play.  
3. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
4. To switch off the unit, turn the Volume Knob fully counter-clockwise.  
Listening to Radio  
Setting Up Antennas  
1. Snap AM loop antenna into provided stand, then plug antenna cable into the AM Antenna socket on back of the unit.  
Move antenna 12” away from the unit and rotate it for best reception.  
2. Extend FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antenna.  
Tuning and Playing the Radio  
1. Turn the Function Knob to AM or FM to select AM or FM radio band.  
2. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
3. Turn the Tuning Knob to tune radio to the desired station.  
4. To switch off the unit, turn the Volume Knob fully counter-clockwise.  
Using the Aux-in Jack  
1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your nondocking iPod or other  
audio device and the other end of the patch cord into the Aux-in Jack located on the back of the unit.  
2. Turn the Function Knob to AUX.  
3. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
4. To switch off the unit, turn the Volume Wheel fully counter-clockwise.  
Using the Headphones Jack  
1. Plug your headphones into the Headphones Jack located on the back of the unit for private listening to any selected  
function (iPod, radio or aux). Speaker output is disabled when headphones are plugged in.  
2. Turn the Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the EXB  
Switch to On for sound boost.  
3. To switch off the unit, turn the Volume Knob fully counter-clockwise.  
3
 
A Consumer Guide to Product Safety  
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.  
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating  
instructions carefully before installation and use, and keep these instructions handy for future reference. Take special  
note of all warnings listed in these instructions and on the unit.  
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,  
laundry tub, swimming pool or in a wet basement.  
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.  
For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.  
Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of  
air through the ventilation openings.  
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances  
(including amplifiers) that produce heat.  
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating  
instructions or as marked on the appliance.  
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the  
unit to where it is plugged into an AC socket.  
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for  
cleaning instructions.  
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any  
openings or vents located on the product.  
8. Attachments Do not use attachments not recommended by the product manufacturer.  
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or  
cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will  
prevent damage to the product due to lightning and power-line surges.  
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:  
A.  
B.  
C.  
D.  
E.  
the power supply cable or plug has been damaged.  
objects have fallen into or liquid has been spilled into the enclosure.  
the unit has been exposed to rain.  
the unit has been dropped or the enclosure damaged.  
the unit exhibits a marked change in performance or does not operate normally.  
12. Antenna – Do not connect an external antenna to the unit (other than that provided).  
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the  
power cable should be unplugged from the unit to prevent damage or corrosion.  
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating  
instructions. Service methods not covered in the operating instructions should be referred to qualified service  
personnel.  
4
 
Troubleshooting  
Possible Problem  
Solution  
Symptom  
Unit does not respond AC adaptor isn’t plugged into a wall outlet or Plug the AC adaptor into a wall outlet and plug the connector into  
the connector is not plugged into the power the supply jack on the unit. Turn Volume knob to turn unit on.  
supply jack on the back of the unit  
Wall outlet is not functioning  
Plug another device into the same wall outlet to confirm the outlet  
is working. If the outlet is controlled by a switch, turn switch on.  
iPod cannot dock  
properly  
Using no or wrong iPod insert  
iPod isn’t installed properly  
Make sure the dock insert is the proper fit to your iPod  
Remove your iPod from the dock and check for obstruction on the  
connectors in the dock and on your iPod. Then reseat it in the dock.  
iPod is playing but  
there’s no sound  
iPod is not installed properly  
Remove your iPod from the dock and check for obstruction on  
the connectors in the dock and on your iPod. Then reseat it in  
the dock.  
Function knob is not set to iPod  
iPod is locked up  
Make sure Function knob is set to iPod  
Please make sure your iPod is working properly before docking  
into the unit. Please refer to your iPod manual for details.  
Remove your iPod from the dock and check for obstruction on  
the connectors in the dock and on your iPod. Then reseat it in  
the dock.  
iPod didn’t charge  
Sound is distorted  
iPod is not installed properly  
iPod is locked up/frozen  
iPod battery has problem  
Volume level is set too high  
Sound source is distorted  
Please make sure your iPod is working properly before docking  
into the unit. Please refer to your iPod manual for details.  
Decrease the unit volume and set EXB switch to off  
If iPod original sound source is poor quality, distortion and noise  
are easily noticed with high-power speakers.  
Try a different audio source such as a music CD.  
If you are using an iPod Shuffle or external sound source like  
older generation iPod, try reducing the output volume on the  
device itself. Also, try turning bass boost OFF.  
Plug the AM loop antenna connector to the jack on the back of  
the unit. Move the loop antenna away from the unit. Rotate  
antenna for best reception.  
No AM radio sound  
OR very noisy  
AM radio sound  
AM loop antenna is not connected to the  
unit OR is not properly located  
5
 
Solucionando problemas  
Síntoma  
Causa posible  
Solución  
La unidad no  
responde.  
El adaptador de AC no está conectado al  
tomacorriente o el conector no está  
conectado a la ficha en la parte posterior de  
la unidad.  
Conecte el adaptador de AC a un tomacorriente y el adaptador  
a la ficha en la parte posterior de la unidad.  
Gire el control de volumen para encender la unidad.  
El tomacorriente no funciona.  
Conecte otro aparato en ese tomacorriente para verificar si el  
tomacorriente funciona. Si el tomacorriente funciona con un  
interruptor, colóquelo en la posición de encendido.  
El iPod no encastra No ha colocado ningún encastre o ha Verifique que el encastre sea el apropiado para su iPod.  
correctamente.  
colocado el encastre incorrecto para su iPod.  
El iPod no encastró correctamente.  
Quite el iPod del encastre y retire la posible obstrucción del  
encastre o de su iPod. Vuelva a colocar el iPod dentro del  
encastre.  
El iPod está  
funcionando pero no  
hay sonido alguno.  
El iPod no está instalado correctamente.  
Quite el iPod del encastre y verifique posibles obstrucciones del  
encastre o de su iPod. Vuelva a colocar el iPod dentro del  
encastre.  
El control de función iPod no ha sido Coloque el control de función iPod en la posición iPod.  
seleccionado  
El iPod está trabado.  
Verifique que su iPod funciona correctamente antes de conectarlo  
a la unidad. Refiérase al manual de su iPod para más detalles.  
El iPod no cargó.  
El iPod no está instalado correctamente.  
Quite el iPod del encastre y retire la posible obstrucción del  
encastre o de su iPod. Vuelva a colocar el iPod dentro del  
encastre.  
El iPod está trabado/no responde.  
Por favor asegúrese de que su iPod funciona correctamente  
antes de colocarlo en el encastre. Refiérase al manual de su  
iPod para mayor información.  
La batería del iPod podría tener algún  
inconveniente.  
El sonido sale El volumen se encuentra muy alto.  
distorsionado.  
Baje el volumen de la unidad y coloque el selector EXB en  
apagado.  
El sonido de la unidad sale distorsionado.  
Si el sonido original era de pobre calidad, las distorsiones y ruidos  
se harán más notables con los parlantes de alta potencia. Pruebe  
utilizar otra fuente de audio como un CD de música.  
Si está utilizando un iPod Shuffle o un reproductor de primera  
generación, intente bajar el volumen en el aparato mismo. También  
intente apagar el amplificador de bajos (“Bass Boost”).  
No se escucha la La antena circular no se encuentra conectada Inserte el conector de la antena circular a la ficha en la parte  
radio AM o el sonido a la unidad o no está ubicada correctamente. posterior de la unidad. Aleje la antena de la unidad. Gire la antena  
de la radio AM sale  
muy distorsionado  
hasta obtener una mejor recepción.  
6
 
Limited 90-Day Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from  
defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.  
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should  
this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies  
will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, packing, return UPS/postage,  
and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service  
Center listed below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase  
is $20.00.  
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries  
are the most common cause of problems encountered.  
If service is still required:  
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.  
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($20.00 without proof of purchase).  
4. Send the unit prepaid and insured, to the Factory Service Center listed below.  
Consumer Repair Department  
SDI Technologies Inc.  
1330 Goodyear Dr.  
El Paso, TX 79936-6420  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which  
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized  
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes  
(if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.  
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original  
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members  
or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive  
damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may  
not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually  
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product.  
Toll Free Customer Service: 1-800-288-2792  
iH10_iH14IB-030507-3  
©SDI Technologies 2007 All rights Reserved  
 
Printed in China  

Graco Baby Accessories PD170105A User Manual
Greenway Home Products Water Dispenser GWD2630W 1 User Manual
Grundig Flat Panel Television GULCD26HDIT User Manual
HannsG Computer Monitor HU151A User Manual
Harbor Freight Tools Bicycle Accessories 66552 User Manual
Harman Kardon DVD Player DVD 21 User Manual
Hotpoint Refrigerator FZ 90 User Manual
HP Hewlett Packard Network Card PCI 9111DG HR User Manual
Hunter Fan Outdoor Ceiling Fan 22360 User Manual
Husqvarna Lawn Mower 2042 LS User Manual