Casio Watch MA0509 EA User Manual

MA0509-EA  
Operation Guide 4367  
About This Manual  
Depending on the model of your watch, display text  
appears either as dark figures on a light background or  
light figures on a dark background. All sample displays  
in this manual are shown using dark figures on a light  
background.  
For the sake of simplicity, the sample displays in this  
manual do not show the analog hands of the watch.  
Button operations are indicated using the letters shown  
in the illustration.  
Each section of this manual provides you with the  
information you need to perform operations in each  
mode. Further details and technical information can be  
found in the Referencesection.  
General Guide  
Press C to change from mode to mode.  
In any mode (except when a setting screen is on the display), press B to illuminate  
the display.  
Timekeeping Mode  
World Time Mode  
Countdown Timer Mode  
Stopwatch Mode  
Alarm Mode  
Hand Setting Mode  
Press  
.
Digital Time Daylight Saving Time (DST) Setting  
Timekeeping  
Daylight Saving Time (summer time) advances the digital  
time setting by one hour from Standard Time. Remember  
that not all countries or even local areas use Daylight  
Saving Time.  
DST indicator  
This watch features separate digital and analog timekeeping. The procedures for  
setting the digital time and analog time are different.  
In the Timekeeping Mode, you can press D to change the display format as shown  
below.  
To toggle the Timekeeping Mode digital time between  
DST and Standard Time  
1. In the Timekeeping Mode, hold down A until the seconds  
start to flash, which indicates the setting screen.  
2. Press C once to display the DST setting screen.  
3. Press D to toggle between Daylight Saving Time (  
Day of Week  
Month – Day  
PM indicator  
displayed) and Standard Time (  
4. Press A to exit the setting screen.  
displayed).  
The DST indicator appears on the Month – Day screen  
to indicate that Daylight Saving Time is turned on.  
Hour  
Seconds  
Minutes  
Setting the Analog Time  
Digital Time and Date  
Perform the procedure below when the time indicated by the analog hands does not  
match the time of the digital display.  
Use the Timekeeping Mode to set and view a digital display of the current time and date.  
When setting the digital time, you can also configure settings for summer time  
(Daylight Saving time or DST), your Home City code (the code for the city where you  
normally use the watch), and the 12/24-hour format.  
To adjust the analog time  
1. In the Timekeeping Mode, press C five times to enter  
the Hand Setting Mode.  
This watch is preset with a number of city codes, each of which represents the time  
zone where that city is located. When setting the digital time, it is important that you  
select the correct city code for your Home City. If your location is not included in the  
preset city codes, select the preset city code that is in the same time zone as your  
location.  
Note that all of the times for the World Time Mode city codes are displayed in  
accordance with the digital time and date settings you configure in the Timekeeping  
Mode.  
2. Hold down A until the current digital time starts to  
flash, which indicates the analog setting screen.  
3. Press D to advance the analog time setting by  
20 seconds.  
Holding down D advances the analog time setting at  
high speed.  
After you correctly set your Home City time and date, you can set the watch up for  
timekeeping with a different city code simply by changing the Home City code in the  
Timekeeping Mode.  
If you need to advance the analog time setting a long way, hold down D until the  
time starts advancing at high speed, and then press B. This locks the high-  
speed hand movement, so you can release the two buttons. High-speed hand  
movement continues until you press any button. It will also stop automatically  
after the time advances 12 hours or if an alarm (daily alarm or countdown beeper)  
starts to sound.  
To set the digital time and date  
1. In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
2. Press C twice to move the flashing to the Home City  
code setting (see the illustration below), and then use  
B and D to select the code you want.  
Make sure you select your Home City code before  
changing any other setting.  
4. Press A to exit the setting screen.  
The watch will automatically adjust the minute hand slightly to match its internal  
second count when you exit the setting screen.  
To return to the Timekeeping Mode, press C.  
World Time  
For full information on city codes, see the “City Code  
Table”.  
World Time digitally displays the current time in 27 cities  
(29 time zones) around the world.  
City code  
3. Press C to move the flashing in the sequence shown below to select the other  
settings.  
All of the operations in this section are performed in the  
World Time Mode, which you enter by pressing C.  
Seconds  
Day  
DST  
Home City Code  
Hour  
Minutes  
To view the time in another city  
In the World Time Mode, press D to scroll eastwardly  
through city codes.  
For full information about city codes, see the “City Code  
Table”.  
If the current time shown for a city is wrong, it probably  
means there is a problem with your Timekeeping Mode  
time and/or Home City code settings. Go to the  
Timekeeping Mode and make the necessary  
adjustments.  
Month  
Year  
12/24-Hour format  
Current time for  
the selected city code  
4. When the setting you want to change is flashing, use B and D to change it as  
described below.  
Screen  
To do this:  
Do this:  
Reset the seconds to  
Press D.  
Press D.  
Toggle between Daylight Saving Time (  
and Standard Time (  
)
)
Change the Home City code  
Change the hour or minutes  
Use D (east) and B (west).  
Use D (+) and B ().  
Press D.  
Toggle between 12-hour (12H) and 24-hour  
(24H) timekeeping  
Change the year  
Use D (+) and B ().  
Change the month or day  
5. Press A to exit the setting screen.  
See Digital Time Daylight Saving Time (DST) Settingbelow for details about the  
DST setting.  
1
 
Operation Guide 4367  
To turn the Hourly Time Signal on and off  
City Code Table  
1. In the Alarm Mode, use D to select the Hourly Time  
Hourly time signal  
on indicator  
City  
City  
GMT  
Signal (SIG).  
Other major cities in same time zone  
Pago Pago  
Papeete  
Nome  
San Francisco, Las Vegas, Vancouver, Seattle/Tacoma,  
Dawson City  
Code  
Differential  
2. Press A to toggle it on (  
displayed) and off  
– – –  
HNL  
ANC  
11.0  
10.0  
09.0  
(
displayed).  
Honolulu  
Anchorage  
The Hourly Time Signal on indicator is shown on the  
display in all modes while the Hourly Time Signal is  
turned on.  
LAX  
Los Angeles  
08.0  
DEN  
CHI  
Denver  
07.0  
06.0  
El Paso, Edmonton  
Houston, Dallas/Fort Worth, New Orleans,  
Mexico City, Winnipeg  
Chicago  
Montreal, Detroit, Miami, Boston, Panama City,  
Havana, Lima, Bogota  
La Paz, Santiago, Port Of Spain  
NYC  
CCS  
New York  
Caracas  
05.0  
On/Off status  
04.0  
03.0  
02.0  
01.0  
RIO Rio De Janeiro  
Sao Paulo, Buenos Aires, Brasilia, Montevideo  
– – –  
– – –  
GMT  
Reference  
Praia  
+00.0  
+01.0  
+02.0  
Dublin, Lisbon, Casablanca, Dakar, Abidjan  
This section contains more detailed and technical information about watch operation.  
It also contains important precautions and notes about the various features and  
functions of this watch.  
LON  
London  
Paris  
Milan, Rome, Madrid, Amsterdam, Algiers,  
Hamburg, Frankfurt, Vienna, Stockholm, Berlin  
Athens, Helsinki, Istanbul, Beirut, Damascus,  
Cape Town  
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow  
Shiraz  
Abu Dhabi, Muscat  
PAR  
CAI  
JRS  
JED  
THR  
DXB  
KBL  
KHI  
DEL  
DAC  
RGN  
BKK  
Cairo  
Jerusalem  
Jeddah  
Tehran  
Dubai  
Kabul  
Karachi  
Delhi  
Graphic  
+03.0  
+03.5  
+04.0  
+04.5  
+05.0  
+05.5  
+06.0  
+06.5  
+07.0  
The following describes the information indicated by the graphic in each mode.  
Male  
Mumbai, Kolkata  
Colombo  
Dhaka  
Yangon  
Bangkok  
Graphic  
Jakarta, Phnom Penh, Hanoi, Vientiane  
Singapore, Kuala Lumpur, Beijing, Taipei, Manila,  
Perth, Ulaanbaatar  
HKG  
Hong Kong  
+08.0  
Tokyo  
Adelaide  
Sydney  
Noumea  
Wellington  
TYO  
ADL  
SYD  
NOU  
WLG  
+09.0  
+09.5  
+10.0  
+11.0  
+12.0  
Seoul, Pyongyang  
Darwin  
Melbourne, Guam, Rabaul  
Port Vila  
Christchurch, Nadi, Nauru Island  
Mode  
Graphic  
Timekeeping Mode seconds  
Timekeeping  
World Time  
Timekeeping Mode seconds  
Countdown time minutes  
Stopwatch time seconds  
No indication  
Countdown Timer  
Stopwatch  
*Based on data as of December 2004.  
Alarm  
Hand Setting  
No indication  
Auto Return Feature  
If you leave a screen with flashing digits on the display for two or three minutes  
without performing any operation, the watch automatically exits the setting screen.  
Scrolling  
The B and D buttons are used in various modes and setting screens to scroll  
through data on the display. In most cases, holding down these buttons during a scroll  
operation scrolls through the data at high speed.  
Initial Screens  
When you enter the World Time or Alarm Mode, the data you were viewing when you  
last exited the mode appears first.  
Timekeeping  
Resetting the seconds to  
while the current count is in the range of 30 to 59  
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are  
reset to without changing the minutes.  
With the 12-hour format, the P (PM) indicator appears on the display for times in the  
range of noon to 11:59 p.m. and no indicator appears for times in the range of  
midnight to 11:59 a.m.  
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without  
any indicator.  
The year can be set in the range of 2000 to 2039.  
The watchs built-in full automatic calendar makes allowances for different month  
lengths and leap years. Once you set the date, there should be no reason to change  
it except after you have the watchs batteries replaced.  
World Time  
The World Time Mode times are calculated from the current Home City time setting  
in the Timekeeping Mode, using the Greenwich Mean Time (GMT) differentials  
associated with each city code.  
The GMT differential is a value that indicates the time difference between Greenwich  
Mean Time and the time zone where a city is located.  
GMT differential is calculated by this watch based on Universal Time Coordinated  
(UTC) data.  
Backlight Precautions  
The backlight uses an EL (electro-luminescent) panel that causes the entire display to  
glow for easy reading in the dark. In any mode, press B to illuminate the display for  
about two seconds.  
The electro-luminescent panel that provides illumination loses power after very long  
use.  
The illumination provided by the backlight may be hard to see when viewed under  
direct sunlight.  
The watch may emit an audible sound whenever the display is illuminated. This is  
due to vibration of the EL panel used for illumination, and does not indicate  
malfunction.  
The backlight automatically turns off whenever an alarm sounds.  
Frequent use of the backlight shortens the battery life.  
3
 

Belkin Switch G30 153 User Manual
Bogen Power Supply PRS ASAC User Manual
Bosch Appliances DVR DVR4C User Manual
Bosch Appliances Range HES7282U User Manual
Bosch Appliances Ventilation Hood DPH30352UC User Manual
Brodit Automobile Accessories Molex Active Holder User Manual
Bushnell Binoculars 110833 User Manual
Canon Camcorder Z70W User Manual
Canon Digital Camera 5034B001 User Manual
Casio Calculator DJ120D User Manual